| MudmotorTalk.com https://www.mudmotortalk.com/mmt_v2/ |
|
| new copper head 16 hp https://www.mudmotortalk.com/mmt_v2/viewtopic.php?f=5&t=17841 |
Page 1 of 2 |
| Author: | diceman [ Mon Apr 18, 2011 7:14 pm ] |
| Post subject: | new copper head 16 hp |
just got the 1st new 16 hp v twin vangaurd from gill and besty today down at copperhead going to put it on the new 15/40 phowler this weekend will get some pixs up when i run. can't wait ran motor today all i can say ssmmmooottthhh as a babys ass only 130 lbs i love new toys keep u posted 
|
|
| Author: | garrettpearce [ Mon Apr 18, 2011 8:16 pm ] |
| Post subject: | Re: new copper head 16 hp |
is the fram any bigger? |
|
| Author: | diceman [ Mon Apr 18, 2011 8:24 pm ] |
| Post subject: | Re: new copper head 16 hp |
compared to the 12 hp? beefed up, just sent some pixs to a bud waiting for him to post them up. |
|
| Author: | garrettpearce [ Mon Apr 18, 2011 8:26 pm ] |
| Post subject: | Re: new copper head 16 hp |
yea is it the same size as the 12? |
|
| Author: | garrettpearce [ Mon Apr 18, 2011 8:26 pm ] |
| Post subject: | Re: new copper head 16 hp |
16 hp should run atleast 30. the 12 run 27 |
|
| Author: | diceman [ Mon Apr 18, 2011 8:30 pm ] |
| Post subject: | Re: new copper head 16 hp |
will see kool set up looking forward to running it on the phowler 15/40 will seewhat kind of speeds with that hull? |
|
| Author: | Redhead Rendezvous [ Mon Apr 18, 2011 9:04 pm ] |
| Post subject: | Re: new copper head 16 hp |
Congrats man, wish I knew Gil was coming out with a 16 a month ago. I love my 12 but that 16 would def help me push my rig with all my fat a$$ friends loaded up. |
|
| Author: | diceman [ Tue Apr 19, 2011 3:47 am ] |
| Post subject: | Re: new copper head 16 hp |
| Author: | Redhead Rendezvous [ Tue Apr 19, 2011 7:26 am ] |
| Post subject: | Re: new copper head 16 hp |
That's awesome. Gil is a great guy. You are comin from a 12 right? |
|
| Author: | diceman [ Tue Apr 19, 2011 6:31 pm ] |
| Post subject: | Re: new copper head 16 hp |
| Author: | Redhead Rendezvous [ Tue Apr 19, 2011 6:39 pm ] |
| Post subject: | Re: new copper head 16 hp |
Quick question then. At anytime did you have issues with the engine stallin out when you set the prop in the water? And if so what was the fix? |
|
| Author: | Woodiebuster [ Tue Apr 19, 2011 6:47 pm ] |
| Post subject: | Re: new copper head 16 hp |
Sounds like your motor isnt warmed up when you are doin it. Are these frames balanced or weighted back? |
|
| Author: | Redhead Rendezvous [ Tue Apr 19, 2011 7:06 pm ] |
| Post subject: | Re: new copper head 16 hp |
Actually strange thing is that it only happens after a good bit of running. I tracked down a air leak in the fuel system and got that corrected and figured I'd be good, but nadda. |
|
| Author: | diceman [ Tue Apr 19, 2011 8:21 pm ] |
| Post subject: | Re: new copper head 16 hp |
| Author: | Redhead Rendezvous [ Tue Apr 19, 2011 8:24 pm ] |
| Post subject: | Re: new copper head 16 hp |
The twelve |
|
| Author: | Redhead Rendezvous [ Tue Apr 19, 2011 8:57 pm ] |
| Post subject: | Re: new copper head 16 hp |
Cool, thank u . I will give that a go. Do you think upon the idle might help also? |
|
| Author: | Redhead Rendezvous [ Tue Apr 19, 2011 9:10 pm ] |
| Post subject: | Re: new copper head 16 hp |
Ok that def makes sense with some of the issues I had earlier as far as fuel system problems. Kind of new to the whole carbonated engine (a$$ backward I know but I am a fuel injection guru) , so could you be a little more specific on where to find the fuel valve and also the location of the idle screw. I know to turn it clockwise to raise idle I just don't want to jack with the wrong screw. Thanks for the help also. |
|
| Author: | Brasso [ Tue Apr 19, 2011 9:44 pm ] |
| Post subject: | Re: new copper head 16 hp |
Just wondering, cutt down, maybe you can help me with this. Wasn't there a dispute with copperhead and another mm brand? I could swear I read a thread on here talking about a lawsuit files on copperhead?? Anyways, how in the nuts do they get these things to run so fast? And why is everyone buying them when you can get a gtr, pro drive, or mud buddy for close to the same price, I mean they don't offer very many options |
|
| Author: | Brasso [ Tue Apr 19, 2011 9:58 pm ] |
| Post subject: | Re: new copper head 16 hp |
Ok i take back the thing i said about the price, just went on the website, and realized they are decently priced. So im guessing it's just the speed and price that everyone likes? |
|
| Author: | Redhead Rendezvous [ Tue Apr 19, 2011 10:07 pm ] |
| Post subject: | Re: new copper head 16 hp |
I know this was not addressed to me but I can say I went copperhead without a doubt because of the personal service I received from Gil. I was originally looking at a MB, bit didn't have a local dealer, I figured ok whatever I'll call MB. I swear over the two days of dealing with them it seemed as if they didn't want to sell a dang motor. So ok whatever I found a pristine dealer and he quoted me some outrageous price, I don't recall what the total quote was but there was no way that was flying with the wife. And I think the one he quoted me overrated my transom slightly. So after more looking around I ran across gil's little website, no thrills, nothing special had some links to you tube videos of Gil and crew running the 6.5 on a fairly similar boat (smaller but similar) and so I figured I'd call him up. Be answered himself right away (his buisness number is his direct line) he answered Ll the questions I had inteligently and wasn't just talking his product up. I was sold from there, and purchased my motor the next day, and recieved it not e en a week later via freight. Total price was 3060 shipped from LA to Tx via freight. He through in some extras for free as be didn't have the bear bones motor I was looking for so I got remote fuel and camo for free. I am very happy with his service and my motor, despite needing so E adjustments, it runs like a chap at speeds I wouldn't have expected from a 12 hp motor pushing a load of 700 lbs on abet. So again I know it wasn't addressed to me but I think all that should answer your question. |
|
| Author: | Redhead Rendezvous [ Tue Apr 19, 2011 10:09 pm ] |
| Post subject: | Re: new copper head 16 hp |
Sorry bout the long post, and where it says pristine I meant prodrive, (damn iPhone auto correct) |
|
| Author: | Brasso [ Tue Apr 19, 2011 10:17 pm ] |
| Post subject: | Re: new copper head 16 hp |
Thanks man, it was really just addressed to anyone, i didn't realize they were as cheap as they are.. I understand now. Btw sorry to jack your thread diceman! |
|
| Author: | Redhead Rendezvous [ Tue Apr 19, 2011 10:22 pm ] |
| Post subject: | Re: new copper head 16 hp |
Yea for sure, I'll make this my last. Diceman I you could pm me if you have a solution for me I'd appreciate it. Sorry for the thread jack. |
|
| Author: | diceman [ Wed Apr 20, 2011 4:51 am ] |
| Post subject: | Re: new copper head 16 hp |
you have to look at this hole motor Q's, what are you as a buyer looking for , speed, weight, price ,looks, etc. for me i started out with a gtr with a evt stage 1 kit for me it was kool for about the first week to loud for me but needed the power to move heavy rig. then came the fixing and wrenching when its 5 degress out it was not for me. went over to dual PD (stock) and i was sold plus needed that style reverse. now gill came out with a product that is stock (no wrenching) to speack of. for some guys they may not hunt out of the boat and just use it to get to there spots only. my PD / Phowler rig is to hunt out of, but have spots to run to with the new rig 15/40 phowler with the new 16hpcopperhead. 1 the fact that it's stock motor really appeals to me and quiet. 2 look at the speeds from these small engines. 3 look at the price. 4 remote fuel,elec start, 5 look at the weight. i'm not knocking any one product but for me the 2 set ups that i have are the cats ass for what i do while killing ducks .if your running big guys and a lot of weight you have to stay within the curve . this copper head will do great but 4 men 2 dogs etc like any other boat(weight,Power Etc)if you looking for a kickass setup for little money (fuel burn, boat size ,and price,weight hands down this is a great rig) and again i'm not knocking anyone else rig or product but i likes what i gots:!: P.S. were is gildo   LOL GIL
|
|
| Author: | cmiller73 [ Wed Apr 20, 2011 6:51 am ] |
| Post subject: | Re: new copper head 16 hp |
I can't believe they did a 16hp. I haven't talked to Gil and the crew in a while. Glad to see they are stepping off into a bigger market. I think those guys wanting a light motor with good speeds will be going this route. Hope to see some good reviews on this one. |
|
| Author: | jp0242 [ Wed Apr 20, 2011 4:32 pm ] |
| Post subject: | Re: new copper head 16 hp |
so what are the speeds out of the new 16 hp anyone took the gps for a boat ride? |
|
| Author: | cmiller73 [ Wed Apr 20, 2011 5:26 pm ] |
| Post subject: | Re: new copper head 16 hp |
| Author: | diceman [ Wed Apr 20, 2011 5:56 pm ] |
| Post subject: | Re: new copper head 16 hp |
| Author: | jp0242 [ Wed Apr 20, 2011 6:18 pm ] |
| Post subject: | Re: new copper head 16 hp |
| Author: | diceman [ Fri Apr 29, 2011 1:59 pm ] |
| Post subject: | Re: new copper head 16 hp |
been busy with work have not had a chance to run my rig 16hp copperhead /15/40 phowler , but just talk to gill at copperhead he went ridding today in the same rig speeds 1 man deep water range 26.5-27 speeds 2 men deep water range 25-26 sallow water not tested yet and video to follow with speeds above NO BULLSHIT and this test was on a 15/40 Phowler thats weight 320lbs like i said before this a bad ass rig  total weight boat and motor 450lbs give or take plus gill still tweaking props trying for more speedcan't wait for all the nay sayers 
|
|
| Author: | garrettpearce [ Sun May 01, 2011 7:30 am ] |
| Post subject: | Re: new copper head 16 hp |
the only thing i could see they should improve is the down trim. all the way maxed out they really dont trim that far |
|
| Author: | lucecr [ Wed May 25, 2011 5:43 pm ] |
| Post subject: | Re: new copper head 16 hp |
any videos of this motor yet? |
|
| Page 1 of 2 | All times are UTC - 6 hours |
| Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group http://www.phpbb.com/ |
|