| MudmotorTalk.com https://www.mudmotortalk.com/mmt_v2/ |
|
| 17x48 X-Series with Stage 1 PD https://www.mudmotortalk.com/mmt_v2/viewtopic.php?f=5&t=22111 |
Page 1 of 1 |
| Author: | LPS [ Wed Sep 14, 2011 7:11 pm ] |
| Post subject: | 17x48 X-Series with Stage 1 PD |
MM Brand: Pro Drive Horsepower: 36 with a Stage 1 Boat Brand: Pro Drive X-Series Boat Size: 17x48 Boat Layout: extended front deck, moveable gun box, and rear storage seat Speeds | Shallow Water: 28.9mph Speeds | Deep Water: 27mph Total Boat Load With Gear Etc: Me, my buddy, 12 gallons of gas, 48qt ice chest, generator, trolling motor, and bowfishing lights (750-800lbs) Conditions Tested In: calm Comments: I have been reading this site for a while and finally decided to post. I got this boat last year from pro drive and was happy with the stock motor until I got into bowfishing. The boat would push the load above ok with the stock setup but it seemed like it took forever to get out of the water. After reading this site for a while I decided to give Calens Engine Service a call. After talking to Calen I decided to bring my boat down the there and let him put a Stage 1 on my motor. I picked the boat up monday and could not be happier with the way this thing runs (before I was getting 27mph with just me and 6 gallons of gas and I could bump 20 mph with the load above but it would take me forever to get there). Now this thing jumps up on the water no matter what I have in it. Also I would like to give a big thanks to Calen for helping me out. When I got down there monday we took the boat for a test drive ( it ran a steady 31mph with me, Calen, and 6 gallons of gas) and when we pulled it out the water I noticed milky oil all over my lower unit. Turns out the seal behind my prop was bad. Calen went out of his way to find me a new seal, flush out my lower unit, and install the new seal. I cant talk good enough about him and his service. He will recieve all of my business in the future. Thanks again Calen ( I know these pics arent that good but there all I have of the boat right now) |
|
| Author: | craig [ Wed Sep 14, 2011 8:38 pm ] |
| Post subject: | Re: 17x48 X-Series with Stage 1 PD |
Good speeds! |
|
| Author: | BYUGRIZZ [ Thu Sep 15, 2011 6:17 am ] |
| Post subject: | Re: 17x48 X-Series with Stage 1 PD |
what does his stage 1 consist of & how much was it |
|
| Author: | SP [ Thu Sep 29, 2011 5:52 pm ] |
| Post subject: | Re: 17x48 X-Series with Stage 1 PD |
| Author: | cb5331 [ Thu Sep 29, 2011 6:25 pm ] |
| Post subject: | Re: 17x48 X-Series with Stage 1 PD |
That would be my guess. Heads, cam, exhaust. LPS, do you know what cam he put in it? |
|
| Author: | SP [ Thu Sep 29, 2011 6:51 pm ] |
| Post subject: | Re: 17x48 X-Series with Stage 1 PD |
i am pretty sure he uses Hoyt's cam.... |
|
| Author: | Calen [ Thu Sep 29, 2011 7:48 pm ] |
| Post subject: | Re: 17x48 X-Series with Stage 1 PD |
I used hoyts cam in his motor. |
|
| Author: | UNCLE-J [ Thu Sep 29, 2011 7:52 pm ] |
| Post subject: | Re: 17x48 X-Series with Stage 1 PD |
Really good choice on the Engine... |
|
| Author: | the gator [ Thu Sep 29, 2011 8:40 pm ] |
| Post subject: | Re: 17x48 X-Series with Stage 1 PD |
Take it from the man. |
|
| Author: | take'emgator [ Thu Sep 29, 2011 9:29 pm ] |
| Post subject: | Re: 17x48 X-Series with Stage 1 PD |
Calen is some good business, ordered some parts from him on monday and they were here tuesday mid-day.....thanks calen, fast shipping |
|
| Author: | LPS [ Wed Oct 19, 2011 11:54 am ] |
| Post subject: | Re: 17x48 X-Series with Stage 1 PD |
Yes the the stage one calen did on my motor was heads, cam, and exhaust if you want a price give calen a call he will help you out |
|
| Page 1 of 1 | All times are UTC - 6 hours |
| Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group http://www.phpbb.com/ |
|