| Author |
Message |
|
noose
MMT Pro Member
Joined: Sun Oct 17, 2010 11:47 am
Posts: 131
|
 17.5'x48" Garrett Pearce Skiff One piece hull.
17 ½’ x 48”
18“sides
21”transom
Square chine.
Two 2x2’s and two 1x2’s for stringers with one 2x2 cross brace.
2 5/8” catwalks (1 ¼” square tube on the inside and the outside).
Riveted .080 aluminum floor in progress (will be covered with Hydroturf).
Two 1” drain plugs.
Front hatch with 18” extended deck.
Battery and gas tank in front.
Wires and fuel line run under the floor in pvc.
Two spud pole holders on the transom.
Pirogue rack/grab bar sockets.
Installing the lights and switch panel tomorrow.
Will be painting it with Duralux Aluminum Boat Green when it warms up.
23hp GDSD for now…(until the EFI Prodrive comes out next year).
Ran it for about 45 minutes this evening, still trying to dial it in, but it ran a steady 21.2 in deep water with just me in it. It jumps on plane in about 20ft. It’s not just beautiful, it runs great, too!
Garrett is great to deal with and he knows his boats. He sent plenty of updates along the way with pics of the progress. If you are in the market for a custom boat, send him a text to set up a meeting.
You do not have the required permissions to view the files attached to this post.
_________________
ProDrive X36 FPR pushing a 17.5 X 48 Garrett Pearce Skiff
|
| Sat Mar 16, 2013 7:45 pm |
|
|
|
noose
MMT Pro Member
Joined: Sun Oct 17, 2010 11:47 am
Posts: 131
|
Re: 17.5'x48" Garrett Pearce Skiff More pics.
You do not have the required permissions to view the files attached to this post.
_________________
ProDrive X36 FPR pushing a 17.5 X 48 Garrett Pearce Skiff
|
| Sat Mar 16, 2013 7:51 pm |
|
|
|
doubleBanded
MMT 1000 Club
Joined: Sun Feb 03, 2013 1:26 pm
Posts: 3084
Location: Down South
|
Re: 17.5'x48" Garrett Pearce Skiff Nice!
_________________
1852 Dfou custom 35gtr
|
| Sat Mar 16, 2013 8:03 pm |
|
|
|
SwampDuck91
MMT Member
Joined: Thu Jun 02, 2011 11:50 pm
Posts: 49
|
Re: 17.5'x48" Garrett Pearce Skiff That's exactly what I want, send me a PM I would like to know what you gave for it, if you don't mind
|
| Sat Mar 16, 2013 9:00 pm |
|
|
|
doubleBanded
MMT 1000 Club
Joined: Sun Feb 03, 2013 1:26 pm
Posts: 3084
Location: Down South
|
Re: 17.5'x48" Garrett Pearce Skiff Pm Garrett he is the one who builds them
_________________
1852 Dfou custom 35gtr
|
| Sat Mar 16, 2013 9:43 pm |
|
|
|
pooldoo73
MMT F.E.
Joined: Tue Jan 25, 2011 5:47 pm
Posts: 886
Location: Plaquemine
|
Re: 17.5'x48" Garrett Pearce Skiff EFI pro-drive just hit the market. U may b able to get one b4 next year.
_________________
18'x54"CC Hanko/ 36PD
|
| Sun Mar 17, 2013 8:56 am |
|
|
|
Beadlejuicejr
MMT 1000 Club
Joined: Tue Nov 02, 2010 7:11 pm
Posts: 1435
Location: Bayou vista, Louisiana
|
Re: 17.5'x48" Garrett Pearce Skiff Garrett sure make a fine boat
_________________
stage 3 GTR screaming behind the 1848 Garrett Pearce special. GET YOU SOME!
|
| Sun Mar 17, 2013 9:11 am |
|
|
|
noose
MMT Pro Member
Joined: Sun Oct 17, 2010 11:47 am
Posts: 131
|
Re: 17.5'x48" Garrett Pearce Skiff
_________________
ProDrive X36 FPR pushing a 17.5 X 48 Garrett Pearce Skiff
|
| Sun Mar 17, 2013 1:38 pm |
|
|
|
noose
MMT Pro Member
Joined: Sun Oct 17, 2010 11:47 am
Posts: 131
|
Re: 17.5'x48" Garrett Pearce Skiff Lights
You do not have the required permissions to view the files attached to this post.
_________________
ProDrive X36 FPR pushing a 17.5 X 48 Garrett Pearce Skiff
|
| Sat Apr 13, 2013 2:29 pm |
|
|
|
noose
MMT Pro Member
Joined: Sun Oct 17, 2010 11:47 am
Posts: 131
|
Re: 17.5'x48" Garrett Pearce Skiff Paint
You do not have the required permissions to view the files attached to this post.
_________________
ProDrive X36 FPR pushing a 17.5 X 48 Garrett Pearce Skiff
|
| Sat Apr 13, 2013 2:33 pm |
|
|
|
doubleBanded
MMT 1000 Club
Joined: Sun Feb 03, 2013 1:26 pm
Posts: 3084
Location: Down South
|
Re: 17.5'x48" Garrett Pearce Skiff Looks good man!
_________________
1852 Dfou custom 35gtr
|
| Sat Apr 13, 2013 2:45 pm |
|
|
|
mizzippi jb
MMT Elite Member
Joined: Wed Sep 21, 2011 2:53 pm
Posts: 5077
Location: The duck Mecca called Ga!
|
Re: 17.5'x48" Garrett Pearce Skiff
_________________
HOTSAUCE170 wrote:
I've never gone to Seminole for the amenities/luxury the two reasons I go down there are to kill shit and get fucked up with like minded individuals aka OG'S. If you want to swirl wine and stay in a room where politics and investment diversity are discussed (with no roaches) lake lanier is near Atlanta. If you wanna have an awesome time and maybe stay in a room where children were conceived on one side and someone got stabbed over an 8-ball on the other come on down I got a can of raid. 
|
| Sat Apr 13, 2013 3:13 pm |
|
|
|
noose
MMT Pro Member
Joined: Sun Oct 17, 2010 11:47 am
Posts: 131
|
Re: 17.5'x48" Garrett Pearce Skiff
_________________
ProDrive X36 FPR pushing a 17.5 X 48 Garrett Pearce Skiff
|
| Sat Apr 13, 2013 3:40 pm |
|
|
|
brasso
MMT Elite Member
Joined: Fri Oct 07, 2011 12:58 am
Posts: 5557
|
Re: 17.5'x48" Garrett Pearce Skiff Annnnnd you put a godevil on it...  Im just fackin with ya. Great looking skiff! It almost looks like thats a short transom motor??
_________________
1850 Uncle J
Delta Performance level 4 GTR
|
| Sat Apr 13, 2013 9:42 pm |
|
|
|
noose
MMT Pro Member
Joined: Sun Oct 17, 2010 11:47 am
Posts: 131
|
Re: 17.5'x48" Garrett Pearce Skiff
_________________
ProDrive X36 FPR pushing a 17.5 X 48 Garrett Pearce Skiff
|
| Sun Apr 14, 2013 4:44 pm |
|
|
|
noose
MMT Pro Member
Joined: Sun Oct 17, 2010 11:47 am
Posts: 131
|
Re: 17.5'x48" Garrett Pearce Skiff Turf and interior paint. The numbers go on next and thats a wrap.
You do not have the required permissions to view the files attached to this post.
_________________
ProDrive X36 FPR pushing a 17.5 X 48 Garrett Pearce Skiff
|
| Sun Apr 21, 2013 6:33 pm |
|
|
|
NORTHFLORIDAFOWLER
MMT 1000 Club
Joined: Sun Mar 11, 2012 9:00 pm
Posts: 1239
Location: South, Ga/North Fl
|
Re: 17.5'x48" Garrett Pearce Skiff nice looking ride! i miss my old skiff
|
| Sun Apr 21, 2013 8:57 pm |
|
|
|
noose
MMT Pro Member
Joined: Sun Oct 17, 2010 11:47 am
Posts: 131
|
Re: 17.5'x48" Garrett Pearce Skiff Just put a big boy motor on it!
You do not have the required permissions to view the files attached to this post.
_________________
ProDrive X36 FPR pushing a 17.5 X 48 Garrett Pearce Skiff
|
| Thu Apr 03, 2014 8:19 am |
|
|
|
fowllife08
MMT 1000 Club
Joined: Sun Sep 18, 2011 7:25 pm
Posts: 3676
Location: down in da flats, LA
|
Re: 17.5'x48" Garrett Pearce Skiff Update?
_________________
35 GTR chasin a BBC 1848
|
| Thu Apr 03, 2014 8:47 am |
|
|
|
noose
MMT Pro Member
Joined: Sun Oct 17, 2010 11:47 am
Posts: 131
|
Re: 17.5'x48" Garrett Pearce Skiff I've had this skiff for about a year now. And after a hunting it hard this season it has met all of my expectations, and more. Finally put a 36 hp ProDrive on it last week. Me (160#) and my dad (180#) with fishing gear(less than 100#) held 27 mph through the marsh (12" to 18" of water). I haven't been able to run it wide open by my self yet because the trout are biting and my dad comes with me every evening. It's still the best looking skiff that I've ever seen!
Noose
_________________
ProDrive X36 FPR pushing a 17.5 X 48 Garrett Pearce Skiff
|
| Thu Apr 03, 2014 2:58 pm |
|
|
|
