Annnnnd you put a godevil on it...
Im just fackin with ya. Great looking skiff! It almost looks like thats a short transom motor??
| MudmotorTalk.com https://www.mudmotortalk.com/mmt_v2/ |
|
| 17.5'x48" Garrett Pearce Skiff https://www.mudmotortalk.com/mmt_v2/viewtopic.php?f=5&t=38771 |
Page 1 of 1 |
| Author: | noose [ Sat Mar 16, 2013 7:45 pm ] |
| Post subject: | 17.5'x48" Garrett Pearce Skiff |
One piece hull. 17 ½’ x 48” 18“sides 21”transom Square chine. Two 2x2’s and two 1x2’s for stringers with one 2x2 cross brace. 2 5/8” catwalks (1 ¼” square tube on the inside and the outside). Riveted .080 aluminum floor in progress (will be covered with Hydroturf). Two 1” drain plugs. Front hatch with 18” extended deck. Battery and gas tank in front. Wires and fuel line run under the floor in pvc. Two spud pole holders on the transom. Pirogue rack/grab bar sockets. Installing the lights and switch panel tomorrow. Will be painting it with Duralux Aluminum Boat Green when it warms up. 23hp GDSD for now…(until the EFI Prodrive comes out next year). Ran it for about 45 minutes this evening, still trying to dial it in, but it ran a steady 21.2 in deep water with just me in it. It jumps on plane in about 20ft. It’s not just beautiful, it runs great, too! Garrett is great to deal with and he knows his boats. He sent plenty of updates along the way with pics of the progress. If you are in the market for a custom boat, send him a text to set up a meeting. |
|
| Author: | noose [ Sat Mar 16, 2013 7:51 pm ] |
| Post subject: | Re: 17.5'x48" Garrett Pearce Skiff |
More pics. |
|
| Author: | doubleBanded [ Sat Mar 16, 2013 8:03 pm ] |
| Post subject: | Re: 17.5'x48" Garrett Pearce Skiff |
Nice! |
|
| Author: | SwampDuck91 [ Sat Mar 16, 2013 9:00 pm ] |
| Post subject: | Re: 17.5'x48" Garrett Pearce Skiff |
That's exactly what I want, send me a PM I would like to know what you gave for it, if you don't mind |
|
| Author: | doubleBanded [ Sat Mar 16, 2013 9:43 pm ] |
| Post subject: | Re: 17.5'x48" Garrett Pearce Skiff |
Pm Garrett he is the one who builds them |
|
| Author: | pooldoo73 [ Sun Mar 17, 2013 8:56 am ] |
| Post subject: | Re: 17.5'x48" Garrett Pearce Skiff |
EFI pro-drive just hit the market. U may b able to get one b4 next year. |
|
| Author: | Beadlejuicejr [ Sun Mar 17, 2013 9:11 am ] |
| Post subject: | Re: 17.5'x48" Garrett Pearce Skiff |
Garrett sure make a fine boat |
|
| Author: | noose [ Sun Mar 17, 2013 1:38 pm ] |
| Post subject: | Re: 17.5'x48" Garrett Pearce Skiff |
| Author: | noose [ Sat Apr 13, 2013 2:29 pm ] |
| Post subject: | Re: 17.5'x48" Garrett Pearce Skiff |
Lights |
|
| Author: | noose [ Sat Apr 13, 2013 2:33 pm ] |
| Post subject: | Re: 17.5'x48" Garrett Pearce Skiff |
Paint |
|
| Author: | doubleBanded [ Sat Apr 13, 2013 2:45 pm ] |
| Post subject: | Re: 17.5'x48" Garrett Pearce Skiff |
Looks good man! |
|
| Author: | mizzippi jb [ Sat Apr 13, 2013 3:13 pm ] |
| Post subject: | Re: 17.5'x48" Garrett Pearce Skiff |
| Author: | noose [ Sat Apr 13, 2013 3:40 pm ] |
| Post subject: | Re: 17.5'x48" Garrett Pearce Skiff |
| Author: | brasso [ Sat Apr 13, 2013 9:42 pm ] |
| Post subject: | Re: 17.5'x48" Garrett Pearce Skiff |
Annnnnd you put a godevil on it... Im just fackin with ya. Great looking skiff! It almost looks like thats a short transom motor??
|
|
| Author: | noose [ Sun Apr 14, 2013 4:44 pm ] |
| Post subject: | Re: 17.5'x48" Garrett Pearce Skiff |
| Author: | noose [ Sun Apr 21, 2013 6:33 pm ] |
| Post subject: | Re: 17.5'x48" Garrett Pearce Skiff |
Turf and interior paint. The numbers go on next and thats a wrap. |
|
| Author: | NORTHFLORIDAFOWLER [ Sun Apr 21, 2013 8:57 pm ] |
| Post subject: | Re: 17.5'x48" Garrett Pearce Skiff |
nice looking ride! i miss my old skiff |
|
| Author: | noose [ Thu Apr 03, 2014 8:19 am ] |
| Post subject: | Re: 17.5'x48" Garrett Pearce Skiff |
Just put a big boy motor on it! |
|
| Author: | fowllife08 [ Thu Apr 03, 2014 8:47 am ] |
| Post subject: | Re: 17.5'x48" Garrett Pearce Skiff |
Update? |
|
| Author: | noose [ Thu Apr 03, 2014 2:58 pm ] |
| Post subject: | Re: 17.5'x48" Garrett Pearce Skiff |
I've had this skiff for about a year now. And after a hunting it hard this season it has met all of my expectations, and more. Finally put a 36 hp ProDrive on it last week. Me (160#) and my dad (180#) with fishing gear(less than 100#) held 27 mph through the marsh (12" to 18" of water). I haven't been able to run it wide open by my self yet because the trout are biting and my dad comes with me every evening. It's still the best looking skiff that I've ever seen! Noose |
|
| Page 1 of 1 | All times are UTC - 6 hours |
| Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group http://www.phpbb.com/ |
|