Congrats, you'll have a blast with that new PD. It takes everything I got right now to keep from jacking this thread up with questions bout that new prop
| MudmotorTalk.com https://www.mudmotortalk.com/mmt_v2/ |
|
| 36 hp Pro-Drive on 17x44 Uncle J https://www.mudmotortalk.com/mmt_v2/viewtopic.php?f=5&t=51808 |
Page 1 of 1 |
| Author: | bikerbob46 [ Wed Mar 26, 2014 6:30 pm ] |
| Post subject: | 36 hp Pro-Drive on 17x44 Uncle J |
MM Brand: 2014 Pro-Drive Horsepower: 36 Boat Brand: Uncle J - 3/16" bottom, welded in floor, 1/8" sides (20"), 3' front deck enclosed Boat Size: 17 x 44 Boat Layout: Open Speeds | Shallow Water: 28 mph Speeds | Deep Water: 26 mph Total Boat Load With Gear Etc: Me (275#), Dog (50#), 10 gal gas (in front of boat), Battery in back of boat, 50 qt ice chest full of ice Conditions Tested In: Open lake and marsh with 4' runs (only about 1' of water with soft mud bottom) Comments: New motor with only 3 hours. 4200 rpm - will turn 4400 rpm but no gain in speed |
|
| Author: | WhoDat88 [ Wed Mar 26, 2014 6:41 pm ] |
| Post subject: | Re: 36 hp Pro-Drive on 17x44 Uncle J |
Congrats, did meet or exceed your expectations? |
|
| Author: | bikerbob46 [ Wed Mar 26, 2014 6:47 pm ] |
| Post subject: | Re: 36 hp Pro-Drive on 17x44 Uncle J |
Right where I hoped it would run. Tremendously more power than the 27 hp I had on the boat before |
|
| Author: | WhoDat88 [ Wed Mar 26, 2014 6:51 pm ] |
| Post subject: | Re: 36 hp Pro-Drive on 17x44 Uncle J |
| Author: | fowllife08 [ Wed Mar 26, 2014 7:27 pm ] |
| Post subject: | Re: 36 hp Pro-Drive on 17x44 Uncle J |
Pics of this unit? |
|
| Author: | OwenDickeson [ Wed Mar 26, 2014 7:29 pm ] |
| Post subject: | Re: 36 hp Pro-Drive on 17x44 Uncle J |
Good deal. Should run real good when they get the new 2-blades out. |
|
| Author: | fowllife08 [ Wed Mar 26, 2014 7:36 pm ] |
| Post subject: | Re: 36 hp Pro-Drive on 17x44 Uncle J |
| Author: | CootSlayerRMFT [ Wed Mar 26, 2014 7:59 pm ] |
| Post subject: | Re: 36 hp Pro-Drive on 17x44 Uncle J |
First time I've heard that. Subscribed. Sent from my iPhone using Tapatalk |
|
| Author: | North LA Hunter [ Wed Mar 26, 2014 8:01 pm ] |
| Post subject: | 36 hp Pro-Drive on 17x44 Uncle J |
That things is turning some good rpm! Congrats on the new motor! Sent from my beeper |
|
| Author: | OwenDickeson [ Wed Mar 26, 2014 8:16 pm ] |
| Post subject: | Re: 36 hp Pro-Drive on 17x44 Uncle J |
They had a 20x54 self bail the other day running 28 deep water with a stock motor. Sent from my XT1080 using Tapatalk |
|
| Author: | CJB [ Wed Mar 26, 2014 8:31 pm ] |
| Post subject: | Re: 36 hp Pro-Drive on 17x44 Uncle J |
| Author: | bikerbob46 [ Wed Mar 26, 2014 8:35 pm ] |
| Post subject: | Re: 36 hp Pro-Drive on 17x44 Uncle J |
Thanks all. I hope to enjoy it a lot. Planning on it being my primary use boat |
|
| Author: | CootSlayerRMFT [ Wed Mar 26, 2014 8:49 pm ] |
| Post subject: | Re: 36 hp Pro-Drive on 17x44 Uncle J |
| Author: | WhoDat88 [ Wed Mar 26, 2014 9:33 pm ] |
| Post subject: | Re: 36 hp Pro-Drive on 17x44 Uncle J |
| Author: | OwenDickeson [ Thu Mar 27, 2014 7:34 am ] |
| Post subject: | Re: 36 hp Pro-Drive on 17x44 Uncle J |
Test prop Sent from my XT1080 using Tapatalk |
|
| Author: | WhoDat88 [ Thu Mar 27, 2014 8:10 am ] |
| Post subject: | Re: 36 hp Pro-Drive on 17x44 Uncle J |
| Author: | brickgw [ Thu Mar 27, 2014 9:04 am ] |
| Post subject: | Re: 36 hp Pro-Drive on 17x44 Uncle J |
Congrats, you'll have a blast with that new PD. It takes everything I got right now to keep from jacking this thread up with questions bout that new prop
|
|
| Author: | PSD [ Thu Mar 27, 2014 9:08 am ] |
| Post subject: | Re: 36 hp Pro-Drive on 17x44 Uncle J |
That makes two of us ^^^^ |
|
| Author: | krogers [ Thu Mar 27, 2014 3:56 pm ] |
| Post subject: | Re: 36 hp Pro-Drive on 17x44 Uncle J |
Owen you wrong for that edit........nice rig sir, hope you enjoy it!! |
|
| Page 1 of 1 | All times are UTC - 6 hours |
| Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group http://www.phpbb.com/ |
|