| MudmotorTalk.com https://www.mudmotortalk.com/mmt_v2/ |
|
| Uncle J 1854 - 2013 Pro Drive https://www.mudmotortalk.com/mmt_v2/viewtopic.php?f=5&t=66936 |
Page 1 of 1 |
| Author: | brickgw [ Sat May 21, 2016 11:36 am ] |
| Post subject: | Uncle J 1854 - 2013 Pro Drive |
MM Brand: 2013 Gen 3 Pro Drive with heads, mikuni and baffled marshmellow double barrel. 2 blade prop Horsepower: 36 Boat Brand: Uncle J Boat Size: 1854 Boat Layout: Open floor plan, 3/16 bottom, 4in catwalks extended deck, spud pole kit, moveable seat base Speeds | Shallow Water: n/a Speeds | Deep Water: 27 steady bumping 28 Total Boat Load With Gear Etc: trolling motor n battery, 3 guys, 2 coolers and fishing gear Conditions Tested In: Deep water with light wind on the river Comments: After running the motor for 3 years on an 32 year old 1860 riveted mod v jon it was time for a new boat. I had been fishing from a bass boat and hunting out of the old jon so I wanted to get one boat setup to do both. Fishing 3 guys from the bass boat got to be cramped once you got cooler, tackle boxes and a bunch of gear in the boat so the open floor plan was an easy decision. All the storage in the bass rig was nice but seemed to collect more junk than anything else. The speeds listed above didn't change between running empty or with a fishing load. The old jon that I had would drop off in performance pretty quick with any kind of load in the boat. The best speed with it was 27 with a completely empty boat, with the current and stiff wind at my back. With a load it would run about 24 or 25 at best. Going to a true mud hull the improvement in speed and load carrying is definitely nice and it is much, much smoother driving. I'm sure it would be quicker yet if I didnt have the gen 3 lower unit. Im very happy with how the boat turned out. J was real helpful and super easy to work with through the whole process. It was an 1800 mile round trip to get the boat and I'd make the trip again without thinkin twice about it. Ill update the review when the river drops and there's some shallow water. |
|
| Author: | Brokeknee [ Sat May 21, 2016 10:14 pm ] |
| Post subject: | Re: Uncle J 1854 - 2013 Pro Drive |
Good looking boat! |
|
| Author: | duckhunter888 [ Sun May 22, 2016 7:46 am ] |
| Post subject: | Re: Uncle J 1854 - 2013 Pro Drive |
Nice rig, who painted it? |
|
| Author: | brickgw [ Sun May 22, 2016 8:04 am ] |
| Post subject: | Re: Uncle J 1854 - 2013 Pro Drive |
Thanks, im not sure who he had do the paint job. |
|
| Author: | SCmudder7071 [ Sun May 22, 2016 9:42 am ] |
| Post subject: | Re: Uncle J 1854 - 2013 Pro Drive |
Nice and open. Just the way I like them. Good looking rig! |
|
| Author: | Ducknut [ Sun May 22, 2016 3:38 pm ] |
| Post subject: | Re: Uncle J 1854 - 2013 Pro Drive |
Nice looking boat. Great review. What's a boat like that cost? 1800 miles? Where you at? Pm me if you want to keep that info private... |
|
| Author: | brickgw [ Sun May 22, 2016 4:36 pm ] |
| Post subject: | Re: Uncle J 1854 - 2013 Pro Drive |
Im in central illinois. Ill put it this way...it was worth making the road trip to Louisiana. There were 2 other builders that would've made for a significantly shorter trip had I went that route. |
|
| Author: | waterfowler9 [ Mon May 23, 2016 11:28 am ] |
| Post subject: | Re: Uncle J 1854 - 2013 Pro Drive |
AAD and phowler? I am driving down Georgia from central IL to pick my prodigy up in another month or so. I have only seen one other prodigy around here, but i am sure there will be a few more around in the next few years. I really considered an uncle J boat but would have been a little longer drive. AAD would have been a cheaper route but would have been a significantly longer wait and they are not known for making mud hulls. |
|
| Author: | brickgw [ Mon May 23, 2016 11:54 am ] |
| Post subject: | Re: Uncle J 1854 - 2013 Pro Drive |
I did contact AAD but that wasnt who I was referring to. The way they build their mud boats didn't really impress me. The plate boats they build are the cats ass though |
|
| Author: | Frog [ Mon May 23, 2016 1:32 pm ] |
| Post subject: | Re: Uncle J 1854 - 2013 Pro Drive |
Nice rig man, congrats |
|
| Author: | brickgw [ Mon May 23, 2016 1:39 pm ] |
| Post subject: | Re: Uncle J 1854 - 2013 Pro Drive |
Thank you, hopefully in the not to distant future Ill be hitting ya up for some GG for this thing |
|
| Author: | Frog [ Mon May 23, 2016 1:48 pm ] |
| Post subject: | Re: Uncle J 1854 - 2013 Pro Drive |
| Author: | Ducknut [ Tue May 24, 2016 6:26 pm ] |
| Post subject: | Re: Uncle J 1854 - 2013 Pro Drive |
Is that uncle-j in the pic? Sure is a handsome fellow.... |
|
| Page 1 of 1 | All times are UTC - 6 hours |
| Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group http://www.phpbb.com/ |
|