|
|
FAQ
• Login
|
|
It is currently Thu Jun 26, 2025 10:14 am
|
|
Page 1 of 1
|
[ 5 posts ] |
|
| Author |
Message |
|
leonides
MMT Pro Member
Joined: Tue Sep 11, 2012 6:28 am
Posts: 60
|
 Brake Lever Where can I find a Bike or Motorcycle brake lever able to be fitted to a Long Tail Handlebar of 1 1/8".?
Must regular bikes take 7/8"
Any help will be appreciated .
thanks
P.B.
|
| Fri Apr 17, 2015 10:10 am |
|
|
|
Ptuck66
MMT Pro Member
Joined: Mon Feb 02, 2015 2:28 pm
Posts: 84
|
Re: Brake Lever Ebay, I bought a HD clutch lever for my 1" Handle, I am sure you can find something for 1 1/8"
|
| Fri Apr 17, 2015 12:55 pm |
|
|
|
Schmidty721
MMT Pro Member
Joined: Mon Sep 23, 2013 11:15 am
Posts: 140
|
Re: Brake Lever The largest bar diameter you will find on a motorcycle is 1".
If you can find a lever that has a nylon bushing between the mount and bar, you'll be close it 1-1/8" with the bushing removed
|
| Fri Apr 17, 2015 1:10 pm |
|
|
|
fireman1293
MMT Pro Member
Joined: Fri Dec 25, 2009 7:09 pm
Posts: 102
|
Re: Brake Lever Is the ID of your handle 7/8"? If so, shove a piece of 1/2" pipe inside it. It will generally wedge inside because of the seam on the inside of your handle, then put the lever and grip on the 1/2" pipe because the OD is 7/8"
Good luck
|
| Sun Apr 19, 2015 11:38 am |
|
|
|
leonides
MMT Pro Member
Joined: Tue Sep 11, 2012 6:28 am
Posts: 60
|
Re: Brake Lever Found one that will fit at Ebay, thanks you all for your help.
P,B,
|
| Sun Apr 19, 2015 7:51 pm |
|
|
|
|
|
Page 1 of 1
|
[ 5 posts ] |
|
Who is online |
Users browsing this forum: No registered users and 43 guests |
|
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum
|
|