| MudmotorTalk.com https://www.mudmotortalk.com/mmt_v2/ |
|
| what causes this https://www.mudmotortalk.com/mmt_v2/viewtopic.php?f=6&t=12910 |
Page 1 of 1 |
| Author: | godevil16 [ Thu Oct 07, 2010 6:35 pm ] |
| Post subject: | what causes this |
16hp briggs to spit and sputter wen u get on it? |
|
| Author: | Tenpoint [ Thu Oct 07, 2010 6:36 pm ] |
| Post subject: | Re: what causes this |
bad gas. dirty carb maybe |
|
| Author: | mississippiduckboy [ Thu Oct 07, 2010 6:37 pm ] |
| Post subject: | Re: what causes this |
dirty carb my guess |
|
| Author: | autogateman [ Thu Oct 07, 2010 6:37 pm ] |
| Post subject: | Re: what causes this |
needs carb cleaned. not just wit spray, totally disassembled and cleaned thoroughly |
|
| Author: | godevil16 [ Thu Oct 07, 2010 6:40 pm ] |
| Post subject: | Re: what causes this |
wat would it cost at a lawnmower shop to do it bc i have no clue hom to mess with that |
|
| Author: | autogateman [ Thu Oct 07, 2010 6:44 pm ] |
| Post subject: | Re: what causes this |
the one where i live (gonzales la) is 45 an hour |
|
| Author: | godevil16 [ Thu Oct 07, 2010 6:45 pm ] |
| Post subject: | Re: what causes this |
dam i juss dont trust maself taking it apart and putting it back together |
|
| Author: | autogateman [ Thu Oct 07, 2010 6:47 pm ] |
| Post subject: | Re: what causes this |
the dissasembly/assembly part is actually very easy. its making sure the air/fuel mixture screw is set correctly and then adjusting proper idle speed. |
|
| Author: | godevil16 [ Thu Oct 07, 2010 6:50 pm ] |
| Post subject: | Re: what causes this |
do u do that whie the carb is on or off? the adjusting |
|
| Author: | autogateman [ Thu Oct 07, 2010 6:55 pm ] |
| Post subject: | Re: what causes this |
with the fuel mixture screw, after you remove the carb, tighten and LIGHTLY seat the screw, while counting how many turns it took to get there. when you reassemble, put the screw all the way back in, then back it out to where it was before. and you do that off of the boat, you shouldnt have to mess wit it after reinstalling the carb if you got it right. the idle screw can actually prolly be left in place. the main thing is that you wanna remove the jets, o rings and gaskets. the orings and gaskets will be ate up from the cleaner. i buy the cleaner in a gallon from oreilly auto, it has concise instructions on the label, it works great |
|
| Author: | godevil16 [ Thu Oct 07, 2010 7:17 pm ] |
| Post subject: | Re: what causes this |
alright ill take a look at it tomorrow thanks man for all the help |
|
| Author: | autogateman [ Thu Oct 07, 2010 7:19 pm ] |
| Post subject: | Re: what causes this |
no prob bud. btw, i buy a service manual for everything i have that has an engine. the factory manual will explain everything in detail. any lawnmower shop can get you one |
|
| Author: | kibb [ Thu Oct 07, 2010 7:21 pm ] |
| Post subject: | Re: what causes this |
| Author: | godevil16 [ Thu Oct 07, 2010 7:28 pm ] |
| Post subject: | Re: what causes this |
iight ima check it out next time i go..................x2? |
|
| Author: | autogateman [ Thu Oct 07, 2010 7:30 pm ] |
| Post subject: | Re: what causes this |
that means i agree |
|
| Author: | godevil16 [ Thu Oct 07, 2010 7:35 pm ] |
| Post subject: | Re: what causes this |
oh ok lol i was lost for a sec |
|
| Page 1 of 1 | All times are UTC - 6 hours |
| Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group http://www.phpbb.com/ |
|