| MudmotorTalk.com https://www.mudmotortalk.com/mmt_v2/ |
|
| can i put a 11hp on a 6.5hp gdlt frame https://www.mudmotortalk.com/mmt_v2/viewtopic.php?f=6&t=13765 |
Page 1 of 1 |
| Author: | d2nx80 [ Sun Nov 14, 2010 10:36 pm ] |
| Post subject: | can i put a 11hp on a 6.5hp gdlt frame |
i have a 11hp honda with a 1 " crank i would like to put on my go devil which has a intek 6.5hp crank is 3/4, shaft is 58", prop is a 7x5 i think. i know i would at least have to get a new yoke for the 1" side of the engine for it to even get going. my frame has no bearings in it just alot of grease and a seal. i know most long tails bigger than 6.5hp go to an 72" shaft. any info would be great ? |
|
| Author: | go-devil15 [ Mon Nov 15, 2010 4:29 pm ] |
| Post subject: | Re: can i put a 11hp on a 6.5hp gdlt frame |
you will need a bigger prop for sure, i dont think the shaft lenght will be a problem.... |
|
| Author: | garjacker [ Mon Nov 15, 2010 7:18 pm ] |
| Post subject: | Re: can i put a 11hp on a 6.5hp gdlt frame |
i dont think your motor will line up. 9hp and up have a Shaft centerline: 5-1/2" (from center of shaft to bottom of base) 8 hp and below have a 4-3/16". plus motor will be heavier, making it unbalanced. best bet for more hp might be go- cart mods. websites. |
|
| Page 1 of 1 | All times are UTC - 6 hours |
| Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group http://www.phpbb.com/ |
|