| MudmotorTalk.com https://www.mudmotortalk.com/mmt_v2/ |
|
| backwater inc motor https://www.mudmotortalk.com/mmt_v2/viewtopic.php?f=6&t=14518 |
Page 1 of 2 |
| Author: | backwater86 [ Mon Dec 13, 2010 12:36 pm ] |
| Post subject: | backwater inc motor |
Anyone else got one of these 27 hp kohler backwater inc. |
|
| Author: | prodriver [ Mon Dec 13, 2010 2:39 pm ] |
| Post subject: | Re: backwater inc motor |
Stay clear if it the same company that sells backwater props on ebay! Pm me if your interested or search the thread on here, buyer beware. |
|
| Author: | garjacker [ Mon Dec 13, 2010 5:33 pm ] |
| Post subject: | Re: backwater inc motor |
x2! |
|
| Author: | frogger [ Mon Dec 13, 2010 5:58 pm ] |
| Post subject: | Re: backwater inc motor |
Ok lets hear it what is the problem with them? I asked the same question about this about bog hog and hill marine props and I get the same thing ....stay away. I need to know why. I am asking because I bought a back water prop and I have had good luck with it . I dont want to put anyone on the spot but share some info with me other than (dont do it ).... |
|
| Author: | garjacker [ Mon Dec 13, 2010 7:00 pm ] |
| Post subject: | Re: backwater inc motor |
OK i called and ordered a prop. said he had problems with other people and would only take check. i mailed check, waited for a week, check hadn't cleared. i called,he said son was in charge of money and hadnt cashed check.waited another week, finally saw where check had cleared my bank, then came the excuses. out of town,got to the post office to late, son was supposed to mail, then they quit answering phone. 20 days later! i call local sheriffs department and a deputy went to his shop and made him mail it. The sheriff told me that he honestly didnt think he would have mailed it if he hadnt interviened. That was my experience. |
|
| Author: | backwater86 [ Tue Dec 14, 2010 12:06 pm ] |
| Post subject: | Re: backwater inc motor |
from the dealings ive had with backwater inc I personally havent had any proplems Ive gotten 2 props and a new motor from them and received everthing ok and i have to say there new motor is a really well put together machine handles better than any of my other LT s not real sure on speeds yet havent had the gps with me yet . once we thaw out up here Ill get some numbers loaded and empty. |
|
| Author: | prodriver [ Tue Dec 14, 2010 12:23 pm ] |
| Post subject: | Re: backwater inc motor |
Hmmmm, makes me wonder if your arlon. Because then that would make sense. I am not trying be an azz, but the way they deal with people makes me think its a 40 year old man living with his mom still and probably funding his operation with her life savings. This guy has no understanding about customer service and or just sending people what they pay for. |
|
| Author: | backwater86 [ Tue Dec 14, 2010 12:27 pm ] |
| Post subject: | Re: backwater inc motor |
nope just a river rat from illinois with a frozen friggin river |
|
| Author: | UNCLE-J [ Tue Dec 14, 2010 12:29 pm ] |
| Post subject: | Re: backwater inc motor |
Tony B... Here is a manufacturer trying to push his motor. From what I read, it's another Gecker.. |
|
| Author: | frogger [ Tue Dec 14, 2010 5:05 pm ] |
| Post subject: | Re: backwater inc motor |
Thats to bad garjacker I hate to hear that , maybe I was lucky or he is got his shiz together, who knows but it does sound like backwater86 might be arlon. I hope not , I dont think it would be right to misrepresent yourself as someone else. |
|
| Author: | frogger [ Tue Dec 14, 2010 5:10 pm ] |
| Post subject: | Re: backwater inc motor |
J whats a Gecker Or do I want to know. |
|
| Author: | mississippiduckboy [ Tue Dec 14, 2010 5:57 pm ] |
| Post subject: | Re: backwater inc motor |
Gecker- was a guy on here a while back, that had a sponsership spot on here, till he stopped sending people what they ordered and all. Tony B the law in the land soon got rid of him there after. |
|
| Author: | backwater86 [ Wed Dec 15, 2010 12:27 am ] |
| Post subject: | Re: backwater inc motor |
not pushing crap just want some feed back on a rig i bought im the only one in my area that has one. Still have a 1992 25hp GDLT, 1985 18 hp GDLT with more hours than a world clock |
|
| Author: | garjacker [ Wed Dec 15, 2010 5:49 pm ] |
| Post subject: | Re: backwater inc motor |
Hey backwater86 maybe you could give us some feedback. do you live in the Minn. or close enough to do local pick ups? whats so unique about arlons longtail that made you buy it? Have you priced bearing,seals ect.? what about warranty? |
|
| Author: | brianb [ Mon Dec 20, 2010 2:57 pm ] |
| Post subject: | Re: backwater inc motor |
i purchased a prop thru ebay, got concerned due to not getting a confirmation email etc. requested a prop for a 16hp motor, the prop arrived within 4 or 5 days, main concern was no one answered phone calls or barely responds to emails. Prop looked good but usually for a 16 hp you use a 8.75 x 4 or a 9 x 3, mine came in labelled a 9x5 but it bogged my motor down severely local prop shop put a guage on it and it is a 9 x7 which is what you would run on a 25 hp, the prop is heavy duty though, just be sure you know what you want instead of letting them decide for you, i have had to get it cut down and they also tried to repitch it and reduce the cup in it, needed it this week so did not have time to hassle with going back thru ebay to state i did not get exactly what was ordered etc. |
|
| Author: | GeeLeDouche [ Tue Dec 21, 2010 2:01 am ] |
| Post subject: | Re: backwater inc motor |
| Author: | brianb [ Tue Dec 21, 2010 10:55 am ] |
| Post subject: | Re: backwater inc motor |
it was a backwater inc prop, purchased off of ebay, did not see the ron hill available till after i had already ordered this one, it is super heavy duty and weedless, came in balanced but it stated it was a 9 x 5, the blades are real thick which would be good on a 25 or so, local prop shop measured it and it is actually a 9x7 with a lot of cup in it, boat will run only 8 mph with 3 adults in it, prop shop worked on it but stated not alot they could do with it without possibly damaging it, they cut it down to 8.75 and changed it to a 9x6 and reduced the cup, with 2 people it will go 13 mph but should be able to get it up to 17-18 with 2 people hindsite, i should have purchased one locally that had the correct pitch and thickness instead of sending them my hp requirements and hoping for the best |
|
| Author: | SPS [ Thu Dec 23, 2010 12:18 am ] |
| Post subject: | Re: backwater inc motor |
How much did the prop cost? |
|
| Author: | mississippiduckboy [ Thu Dec 23, 2010 5:24 pm ] |
| Post subject: | Re: backwater inc motor |
I dont think you will get 17-18 with any 16 hp without mods on it. Im running a 20 empty and gettin 17 with just one person. |
|
| Author: | brianb [ Thu Dec 23, 2010 9:35 pm ] |
| Post subject: | Re: backwater inc motor |
prop on ebay was 169.00 my brother in law has a 14 foot xpress 38 inch bottom with a 16hp on it, with two people, ( teenagers, probably about 275# together, it will gps at 17-18 mph, has a stock vanguard motor on it, so that is what i was basing my speed on |
|
| Author: | GeeLeDouche [ Fri Dec 24, 2010 10:42 pm ] |
| Post subject: | Re: backwater inc motor |
good hell. thats absolutely flying for a 16hp. does it have a gear reduction or something?? |
|
| Author: | brianb [ Sat Dec 25, 2010 11:06 am ] |
| Post subject: | Re: backwater inc motor |
no, just a straight stock setup, i am not sure what prop is on it i tried a worn 9x5 prop on my setup yesterday and with the boat empty, me and my son, together about 325# gps at 13.7 mph top speed but that is straight stretch, with 3 people in boat and decoys (hunting load) i get 9 mph, which i was following my brother in law yesterday morning and they had about the same weight load and they left me, i am beginning to feel the 16hp duromax motor is more like a 12 or 13 hp actual output. with 1 person empty the boat with run about 15-16 mph now. i would be happy if i could run a strong 13 mph loaded, |
|
| Author: | fullcycle415 [ Sat Jul 16, 2011 1:57 am ] |
| Post subject: | Re: backwater inc motor |
What are you guys thinking of these motors. I'm picking one up next week. Ipriced bearings, they are running about the same price at the bearing shop as my mb lt. Typical engine warranty on the kohler, and a good warranty on the shaft. I plan on doing some mods to 27 kohler on it, any suggestions for mods? |
|
| Author: | wm [ Sat Jul 16, 2011 8:28 am ] |
| Post subject: | Re: backwater inc motor |
picked mine up yesterday and i gotta tell ya i love it easier to run then most guys would want you to beleive also check your pm |
|
| Author: | scotts98rt [ Sat Jul 16, 2011 9:19 am ] |
| Post subject: | Re: backwater inc motor |
I also bought prop from ebay, was shipped and recieved in a week. Glad I didnt have the drama some have had here. |
|
| Author: | Rendon_6 [ Sat Jul 16, 2011 12:03 pm ] |
| Post subject: | Re: backwater inc motor |
I was just about to buy a prop from backwater today for my 16 but now I am not sure what ill do with the stuff said from above. |
|
| Author: | solo1189 [ Sat Jul 16, 2011 1:51 pm ] |
| Post subject: | Re: backwater inc motor |
I bought my prop from him and had no issues |
|
| Author: | wm [ Sat Jul 16, 2011 8:09 pm ] |
| Post subject: | Re: backwater inc motor |
| Author: | Powerstroke9773 [ Sat Jul 16, 2011 8:38 pm ] |
| Post subject: | Re: backwater inc motor |
i just bought a 8x4 from them on friday they were nice as could be ran my card gave me a confirmation number didnt charge me shipping because im in the military all around good guy to deal with il let ya know when i get my prop but i have no complaints yet honestly |
|
| Author: | wm [ Sat Jul 16, 2011 8:42 pm ] |
| Post subject: | Re: backwater inc motor |
glade it worked for you this just shows that evryone can have a bad day |
|
| Author: | deanlange [ Sun Jul 17, 2011 7:34 pm ] |
| Post subject: | Re: backwater inc motor |
I got a 10x6 prop from them and it arrived in 2 days. |
|
| Author: | Powerstroke9773 [ Mon Jul 18, 2011 2:26 pm ] |
| Post subject: | Re: backwater inc motor |
just giving yal an update i just recieved my prop today bought it friday in my mailboxthis afternoon completely satisfied with the service goin to try the prop out today |
|
| Author: | quackshot [ Mon Jul 18, 2011 3:48 pm ] |
| Post subject: | Re: backwater inc motor |
Ive never bought from him, but I just checked he has a 100% positive feedback rating on Ebay |
|
| Author: | backwater86 [ Wed Jul 20, 2011 11:47 am ] |
| Post subject: | Re: backwater inc motor |
sold my 27 kohler just waiting for my 35 vanguard. All the mm manufacturers getting busy bout this time of the year Talked to the guys at backwater. motors going out of the shop at a good rate lately. Hopefully I will get mine soon so I can get some duckblind repair and building done early this year before teal season |
|
| Author: | backwater86 [ Wed Jul 20, 2011 11:59 am ] |
| Post subject: | Re: backwater inc motor |
Hey WM what kinda speeds you getting with the 35 I was averaging 21 with my 27 kohler on a 1652 lowe |
|
| Author: | wm [ Wed Jul 20, 2011 2:09 pm ] |
| Post subject: | Re: backwater inc motor |
i havent played with it to much but car gps on the boat went back in forth with 24 and 25 so fore sure 24 strong i will take some picks and ride the hell out of it this weekend and see what i find but i tell you what i love the hell out of it not neair as bad to run as everyone hyped it up to be 
|
|
| Author: | duckdestroyer [ Wed Jul 27, 2011 10:04 pm ] |
| Post subject: | Re: backwater inc motor |
I was thinking of goin with theese guy for there swomp 35 does anyone have one of these, i would like to know all about them |
|
| Author: | backwater86 [ Wed Jul 27, 2011 11:27 pm ] |
| Post subject: | Re: backwater inc motor |
Will let you know after this weekend I get my swomp 35 on friday and Im going to run it hard this weekend theres not going to be much break in time RUN IT LIKE STOLE TIME |
|
| Author: | wm [ Thu Jul 28, 2011 9:00 pm ] |
| Post subject: | Re: backwater inc motor |
| Author: | fullcycle415 [ Tue Aug 16, 2011 12:53 am ] |
| Post subject: | Re: backwater inc motor |
I'm loving my 27 HP Backwater, I'm pushing 21 mph on it with a 15X42 War Eagle. I've been running the hell out of it since I picked it up in July. I think it may be time for a new prop already! Hey WM, I wanna get out and scout the Miss next week now that week can hunt it before the southern opener, I may be heading that way in 2 weeks to scout and do a mud run if you wanna finally meet up. |
|
| Page 1 of 2 | All times are UTC - 6 hours |
| Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group http://www.phpbb.com/ |
|