| MudmotorTalk.com https://www.mudmotortalk.com/mmt_v2/ |
|
| looking for u joints for 6.5 hp longtail https://www.mudmotortalk.com/mmt_v2/viewtopic.php?f=6&t=18721 |
Page 1 of 1 |
| Author: | solo1189 [ Sun May 22, 2011 6:27 pm ] |
| Post subject: | looking for u joints for 6.5 hp longtail |
Can anyone point me in the right direction for a 3/4" x 3/4" u joint with 3/16" keyway? ive found some but only rated for 1,000 rpm. they look very beefy but my motor turns up to 3600! |
|
| Author: | mudmarshall [ Sun May 22, 2011 7:43 pm ] |
| Post subject: | Re: looking for u joints for 6.5 hp longtail |
i got mine from tractor supply |
|
| Author: | quackshot [ Sun May 22, 2011 7:50 pm ] |
| Post subject: | Re: looking for u joints for 6.5 hp longtail |
http://www.driveshaftparts.com/ |
|
| Author: | solo1189 [ Sun May 22, 2011 7:58 pm ] |
| Post subject: | Re: looking for u joints for 6.5 hp longtail |
from tractor supply co? have any part numbers? i went there and asked and they looked at me like i had 2 heads!!! couldnt understand what i was looking for |
|
| Author: | solo1189 [ Tue May 24, 2011 6:57 pm ] |
| Post subject: | Re: looking for u joints for 6.5 hp longtail |
ok found u joints... hopefully ill be operational this weekend!! |
|
| Author: | fishon!! [ Tue May 24, 2011 8:13 pm ] |
| Post subject: | Re: looking for u joints for 6.5 hp longtail |
every tractor supply i been to has em. they got em on the aisle with the driveshafts, chain gears and bearings. but, i see you found one. good luck |
|
| Author: | potomacduck [ Wed May 25, 2011 5:54 am ] |
| Post subject: | Re: looking for u joints for 6.5 hp longtail |
I just rebuilt my 10 year old 6.5 Mudbuddy with a new engine and U-joint. Nobody had exactly what I wanted so I called Mud Buddy, they have their U-joints custom made for them for exactly the RPM's you are talking about. They will have what you need without guess-work or hassle. |
|
| Author: | MaXXis85 [ Wed May 25, 2011 6:50 am ] |
| Post subject: | Re: looking for u joints for 6.5 hp longtail |
Measure the Cross width and the Cap OD and go to a parts store. |
|
| Page 1 of 1 | All times are UTC - 6 hours |
| Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group http://www.phpbb.com/ |
|