Author |
Message |
lilbrother14
MMT Member
Joined: Mon Jun 06, 2011 9:42 pm Posts: 40
|
 18ft riveted jon boat
ok i have a 18 ft by 3 and a half feet wide the boat is really light and i also have a 9 hp vanguard that is just a shaft i have to get it fabbed is that gonna b enough motor im not tryna run thru straight mud but would like the boat to go at least 35 mph is this possible with maybe a 15 i worked the oil spill and we had 14 ft welded boats alot wider than mine with 5.5 longtails and they did about 10 so shld i try and find a 15 or 20 hp lawn tractor engine or what any ideas my funds are verrry limited and also what is my motor i have now worth i see what ebay asks for em
You do not have the required permissions to view the files attached to this post.
|
Mon Jun 06, 2011 10:20 pm |
|
 |
aweyerman
MMT Pro Member
Joined: Fri Sep 17, 2010 11:32 am Posts: 411 Location: Ohatchee, Alabama
|
 Re: 18ft riveted jon boat
Dude you ain't gonna get 35 mph out of anything but an outboard. If speed is an issue no mud motor for you, especially a long tail.
_________________ 1648 Tracker 50 Merc Team Topwater-Alabama
|
Mon Jun 06, 2011 10:28 pm |
|
 |
lilbrother14
MMT Member
Joined: Mon Jun 06, 2011 9:42 pm Posts: 40
|
 Re: 18ft riveted jon boat
ok how was a welded boat with a 5.5 longtail 14 foot with a fukn deck on it and a deck thru the floor elec start boat weighd twice as much as mine if not more and it did 10 mph lol ma boi gota pro drive that does fn 42 but i dnt kno nthn bout this shit all knew to me but i cant c how that oil spill boat with half the power moved like it did that a 15 on mine wont make it do 20 at least
|
Mon Jun 06, 2011 10:35 pm |
|
 |
lilbrother14
MMT Member
Joined: Mon Jun 06, 2011 9:42 pm Posts: 40
|
 Re: 18ft riveted jon boat
i need to get in the red fish ponds and im rigging the boat for bow fishing also
|
Mon Jun 06, 2011 10:36 pm |
|
 |
Woodiebuster
MMT Elite Member
Joined: Wed Mar 03, 2010 7:00 pm Posts: 6060 Location: Choudrant, La
|
 Re: 18ft riveted jon boat
If that pd runs 42, ill shit a golden harp.
And I highly doubt that 14 with a 5.5 was doin 10 mph
I have a 13 hp on a 1442 all welded and with two people and gear all I get is 11.
_________________ CSM Custom 18x42 Battleship with a 36 PD beating you to the hole My Rig (Old Motor) viewtopic.php?f=5&t=45193
(New Motor) viewtopic.php?f=5&t=54733 Stumps Fear Me
|
Mon Jun 06, 2011 10:39 pm |
|
 |
lilbrother14
MMT Member
Joined: Mon Jun 06, 2011 9:42 pm Posts: 40
|
 Re: 18ft riveted jon boat
mayb 8 but dnt matter my boat weighs nothing i can pick the thing up my self jst joined to get som input on building this thing im thinking a 15 to 20 is wat i need
|
Mon Jun 06, 2011 10:43 pm |
|
 |
Woodiebuster
MMT Elite Member
Joined: Wed Mar 03, 2010 7:00 pm Posts: 6060 Location: Choudrant, La
|
 Re: 18ft riveted jon boat
A 23 hp vanguard would be a good match.
And for gods sake, please type in atleast halfway understandible english.
_________________ CSM Custom 18x42 Battleship with a 36 PD beating you to the hole My Rig (Old Motor) viewtopic.php?f=5&t=45193
(New Motor) viewtopic.php?f=5&t=54733 Stumps Fear Me
|
Mon Jun 06, 2011 10:45 pm |
|
 |
lilbrother14
MMT Member
Joined: Mon Jun 06, 2011 9:42 pm Posts: 40
|
 Re: 18ft riveted jon boat
i doubt i can afford a vanguard lookn for a junk lawn tractor ive got a 18 hp snapper that needs a starter n motor is a hog
|
Mon Jun 06, 2011 10:47 pm |
|
 |
Woodiebuster
MMT Elite Member
Joined: Wed Mar 03, 2010 7:00 pm Posts: 6060 Location: Choudrant, La
|
 Re: 18ft riveted jon boat
You can forget runnin 35 mph.
Is that 18 a horizontal or vertical? with the 18 on that boat you may see 16-17 tops by yourself.
_________________ CSM Custom 18x42 Battleship with a 36 PD beating you to the hole My Rig (Old Motor) viewtopic.php?f=5&t=45193
(New Motor) viewtopic.php?f=5&t=54733 Stumps Fear Me
|
Mon Jun 06, 2011 10:54 pm |
|
 |
lilbrother14
MMT Member
Joined: Mon Jun 06, 2011 9:42 pm Posts: 40
|
 Re: 18ft riveted jon boat
vertical which means the stainless fab shop in ma backyard can fab a surface drive
|
Mon Jun 06, 2011 11:11 pm |
|
 |
Woodiebuster
MMT Elite Member
Joined: Wed Mar 03, 2010 7:00 pm Posts: 6060 Location: Choudrant, La
|
 Re: 18ft riveted jon boat
good luck with all dat.
_________________ CSM Custom 18x42 Battleship with a 36 PD beating you to the hole My Rig (Old Motor) viewtopic.php?f=5&t=45193
(New Motor) viewtopic.php?f=5&t=54733 Stumps Fear Me
|
Mon Jun 06, 2011 11:16 pm |
|
 |
lilbrother14
MMT Member
Joined: Mon Jun 06, 2011 9:42 pm Posts: 40
|
 Re: 18ft riveted jon boat
its not rocket science lol
|
Mon Jun 06, 2011 11:24 pm |
|
 |
marsh chicken
MMT Pro Member
Joined: Sat Jun 05, 2010 9:27 pm Posts: 492
|
 Re: 18ft riveted jon boat
hooked on phonics failed you big time dude
|
Mon Jun 06, 2011 11:27 pm |
|
 |
lilbrother14
MMT Member
Joined: Mon Jun 06, 2011 9:42 pm Posts: 40
|
 Re: 18ft riveted jon boat
if u dnt think this boat does 42 come to belle chasse and we can go from there jst bring your boat papers
|
Mon Jun 06, 2011 11:31 pm |
|
 |
lilbrother14
MMT Member
Joined: Mon Jun 06, 2011 9:42 pm Posts: 40
|
 Re: 18ft riveted jon boat
and w.e boat it is u have
|
Mon Jun 06, 2011 11:34 pm |
|
 |
lilbrother14
MMT Member
Joined: Mon Jun 06, 2011 9:42 pm Posts: 40
|
 Re: 18ft riveted jon boat
marsh chicken?
|
Mon Jun 06, 2011 11:37 pm |
|
 |
wm
MMT F.E.
Joined: Sat Feb 19, 2011 11:48 pm Posts: 782 Location: Eau Claire Wi
|
 Re: 18ft riveted jon boat
_________________ 1648 alumacraft with a 35 backwaterinc
|
Tue Jun 07, 2011 11:44 am |
|
 |
autogateman
MMT Sponsor
Joined: Thu Sep 16, 2010 10:32 pm Posts: 4036 Location: Gonzales La
|
 Re: 18ft riveted jon boat
WINNER!!!!!!!!!!!!
Dumbest post of the year.
Dude your buddies PD DOES NOT do 42
You are acting like an idiot.
this is the wrong place to come talkin sh*t
that is all.
|
Tue Jun 07, 2011 12:03 pm |
|
 |
SmokeEater829
MMT 1000 Club
Joined: Sat Jun 13, 2009 8:48 pm Posts: 1830 Location: Belle Chasse, LA
|
 Re: 18ft riveted jon boat
I live in belle chasse, and I ain't heard of no PD running 42. Tell you what, get that boat, I'll bring the beer and the GPS. I wanna see this rig!!
_________________ Mud Buddy 4500 Black Death hauling the Uncle J 18x58
|
Tue Jun 07, 2011 12:43 pm |
|
 |
lilbrother14
MMT Member
Joined: Mon Jun 06, 2011 9:42 pm Posts: 40
|
 Re: 18ft riveted jon boat
lol ive seen the fn boat run 42 n believe me i know what 40 is on the water no one talkn shit lemme holla at ma fn ppl
|
Tue Jun 07, 2011 1:08 pm |
|
 |
lilbrother14
MMT Member
Joined: Mon Jun 06, 2011 9:42 pm Posts: 40
|
 Re: 18ft riveted jon boat
i NEVER said my boat will do 42 i said i kno sum 1 who has a boat {PRO DRIVE} that does 42 dnt believ it what would u liike to put on that bring your gps hes gnna have his ill have mine but if i put a 18 1/2 hp longtail off of a snapper i know im gnna get 20 with no lights no generator just me n a fishn buddy
|
Tue Jun 07, 2011 1:10 pm |
|
 |
MaXXis85
MMT Elite Member
Joined: Wed Jan 14, 2009 7:23 am Posts: 6233 Location: Tarkington, TX
|
 Re: 18ft riveted jon boat
This thread is full of fukin ignorance LOL
_________________ Bayou Surface Drive 337-351-0362 Tarkington, TX 77327
|
Tue Jun 07, 2011 1:15 pm |
|
 |
SmokeEater829
MMT 1000 Club
Joined: Sat Jun 13, 2009 8:48 pm Posts: 1830 Location: Belle Chasse, LA
|
 Re: 18ft riveted jon boat
I'm not worried about your boat. I want to see this Pro Drive rig that runs 42. All I'm saying is that I'll buy the gas and the beer for this ride. And a handheld GPS so I can see it for myself.
_________________ Mud Buddy 4500 Black Death hauling the Uncle J 18x58
|
Tue Jun 07, 2011 1:17 pm |
|
 |
slambin
MMT 1000 Club
Joined: Mon Feb 16, 2009 10:21 pm Posts: 1262 Location: St. Francisville, LA
|
 18ft riveted jon boat
I have lost brain cells after reading this.
Sent from my iPhone using Tapatalk while NOT driving
_________________ 2060 CC 3/4 Gator-tail 1/4 Brother Breaux Boat /35GTR Cowboy thought- a thong on a woman is like a barbed wire fence. It protects the property but doesnt obstruct the view.
|
Tue Jun 07, 2011 1:21 pm |
|
 |
Woodiebuster
MMT Elite Member
Joined: Wed Mar 03, 2010 7:00 pm Posts: 6060 Location: Choudrant, La
|
 Re: 18ft riveted jon boat
............,,,,,,,,,,,??????????
Im gunna lend you some of these, please use them
And for the record: YOUR BUDDYS PD DONT RUN 42, Can somebody show him how many RPM's he would have to turn to do that? THAT 18 WILL NOT PUSH YOU AND A FRIEND 20 MPH YOU ARGUE LIKE A 8TH GRADER, IS THAT 14 IN YOUR USERNAME YOUR AGE? SIT BACK AND BE QUIET FOR A WHILE, YOU MAY LEARN SUMTHIN
_________________ CSM Custom 18x42 Battleship with a 36 PD beating you to the hole My Rig (Old Motor) viewtopic.php?f=5&t=45193
(New Motor) viewtopic.php?f=5&t=54733 Stumps Fear Me
|
Tue Jun 07, 2011 1:50 pm |
|
 |
autogateman
MMT Sponsor
Joined: Thu Sep 16, 2010 10:32 pm Posts: 4036 Location: Gonzales La
|
 Re: 18ft riveted jon boat
i think his gps is set to kilometers per hour
|
Tue Jun 07, 2011 1:51 pm |
|
 |
robin2
MMT Pro Member
Joined: Mon Apr 13, 2009 6:38 pm Posts: 400 Location: Pecanierre,La
|
 Re: 18ft riveted jon boat
Dude, we got a custom 16' flat with a hoped up 90 on the back, with a jack plate tweeked ALL da' way up, with the top 3 water ports plugged. This thing flat out RUNS, ain't no other 90 even close, hell 2 weeks ago it out ran a 18' express C/C with a 115. This boat runs in the mid forty's .
|
Tue Jun 07, 2011 1:57 pm |
|
 |
pearl river outlaw
MMT 1000 Club
Joined: Wed Jul 28, 2010 9:12 am Posts: 1407 Location: Louisville Ms
|
 Re: 18ft riveted jon boat
Man the only way that PD runs 42mph is on a phucking trailor.....You damn sure not even getting close to 42 in the drank or slop.
Looks like you need to be more worried about looking for new tires more then you need to be looking for a motor.
Good luck with the 35mph with a LT you let me know when you build this beast......
_________________ Back Yard Bullshit 1848 with Delta stage II cam & heads, MAC, with a Mikuni juice pump.
No I wasn't talking about you but if the shoe fits lace that bitch up & wear it!!!!
|
Tue Jun 07, 2011 2:19 pm |
|
 |
postalpaul
MMT 1000 Club
Joined: Sun Nov 01, 2009 6:25 pm Posts: 1935 Location: Kaufman- TEXAS
|
 Re: 18ft riveted jon boat
Put the crack pipe down -- substitute some o2
|
Tue Jun 07, 2011 2:25 pm |
|
 |
SwampDonkey1
MMT F.E.
Joined: Tue Mar 08, 2011 10:09 pm Posts: 923 Location: North Central KS
|
 Re: 18ft riveted jon boat
_________________ 1436 Lowe -Workin for the man, Huntin when I can...-
|
Tue Jun 07, 2011 2:41 pm |
|
 |
lilbrother14
MMT Member
Joined: Mon Jun 06, 2011 9:42 pm Posts: 40
|
 Re: 18ft riveted jon boat
yall gonna shit yall selves
|
Tue Jun 07, 2011 3:07 pm |
|
 |
SmokeEater829
MMT 1000 Club
Joined: Sat Jun 13, 2009 8:48 pm Posts: 1830 Location: Belle Chasse, LA
|
 Re: 18ft riveted jon boat
I'm ready to take that chance. When and where can I see it run?
_________________ Mud Buddy 4500 Black Death hauling the Uncle J 18x58
|
Tue Jun 07, 2011 3:10 pm |
|
 |
lilbrother14
MMT Member
Joined: Mon Jun 06, 2011 9:42 pm Posts: 40
|
 Re: 18ft riveted jon boat
soon as i hear from my ppl and odd of you seeing it run for free isnt goodd
|
Tue Jun 07, 2011 3:47 pm |
|
 |
MaXXis85
MMT Elite Member
Joined: Wed Jan 14, 2009 7:23 am Posts: 6233 Location: Tarkington, TX
|
 Re: 18ft riveted jon boat
_________________ Bayou Surface Drive 337-351-0362 Tarkington, TX 77327
|
Tue Jun 07, 2011 3:49 pm |
|
 |
SmokeEater829
MMT 1000 Club
Joined: Sat Jun 13, 2009 8:48 pm Posts: 1830 Location: Belle Chasse, LA
|
 Re: 18ft riveted jon boat
Thats what the beer and gas was for! Anything more than that and you can forget it. I'm not going to pay to watch a boat run. And if your "buddy" actually has a PD that runs 42, he would want to show it off. I'm gonna go ahead and call bullshit on this right now.
_________________ Mud Buddy 4500 Black Death hauling the Uncle J 18x58
|
Tue Jun 07, 2011 3:53 pm |
|
 |
pearl river outlaw
MMT 1000 Club
Joined: Wed Jul 28, 2010 9:12 am Posts: 1407 Location: Louisville Ms
|
 Re: 18ft riveted jon boat
_________________ Back Yard Bullshit 1848 with Delta stage II cam & heads, MAC, with a Mikuni juice pump.
No I wasn't talking about you but if the shoe fits lace that bitch up & wear it!!!!
|
Tue Jun 07, 2011 4:32 pm |
|
 |
fishon!!
MMT Pro Member
Joined: Tue Nov 17, 2009 6:52 pm Posts: 339 Location: Capital Shity, LA
|
 Re: 18ft riveted jon boat
MAAAN!!! dude you came to the best place possible to get your information on how to make a fine boat out of yours, and all you did was make an ASS out of yourself. you now have a reputation with some of the best respected mudboaters in south loiusisna. CONGRATUFUKINLATIONS!
_________________ Save your confederate money, cause the south WILL rise again homebuilt 11 HP greyhound LongTail -1436 flatbottom
|
Tue Jun 07, 2011 4:45 pm |
|
 |
jacobgiles
MMT Member
Joined: Sun Sep 05, 2010 3:17 pm Posts: 29 Location: Atoka, TN
|
 Re: 18ft riveted jon boat
|
Tue Jun 07, 2011 4:53 pm |
|
 |
wm
MMT F.E.
Joined: Sat Feb 19, 2011 11:48 pm Posts: 782 Location: Eau Claire Wi
|
 Re: 18ft riveted jon boat
_________________ 1648 alumacraft with a 35 backwaterinc
|
Tue Jun 07, 2011 6:10 pm |
|
 |
duckduckboom
MMT Elite Member
Joined: Tue Nov 23, 2010 6:33 pm Posts: 5603 Location: Corner of Hell an high water, La
|
 Re: 18ft riveted jon boat
I can't decide if i feel smarter now knowing that there are dumber people in the world than myself or i feel dumber having just read this
_________________ You have your whole life to be an idiot, take a day off!
|
Tue Jun 07, 2011 6:37 pm |
|
 |
|