| MudmotorTalk.com https://www.mudmotortalk.com/mmt_v2/ |
|
| correct prop for 16 gdlt w/ 1448 https://www.mudmotortalk.com/mmt_v2/viewtopic.php?f=6&t=20888 |
Page 1 of 1 |
| Author: | ottertailriverrunner [ Wed Aug 10, 2011 7:59 pm ] |
| Post subject: | correct prop for 16 gdlt w/ 1448 |
Im running a 1448 jon and i picked up a 16 vanguard gd. with a bowfishing deck, bow mount/battery and my 5 and 8 year olds up front im running 13-14 mph which i am fine with. I replaced the lower and upper grease seals and noticed im running a 9x6 prop that is worn down to 8 1/2". The boat will plain out fine but i feel im not running the full rpm's (no tac, but getting one). I saw the other thread on running a 9x3 prop on a 16 lt. Any thoughts on ordering a new prop for my combo?? |
|
| Author: | kibb [ Wed Aug 10, 2011 8:13 pm ] |
| Post subject: | Re: correct prop for 16 gdlt w/ 1448 |
9 x 3 |
|
| Author: | Duckdon [ Sat Aug 27, 2011 4:24 pm ] |
| Post subject: | Re: correct prop for 16 gdlt w/ 1448 |
9x3 |
|
| Author: | backwater86 [ Sat Aug 27, 2011 8:38 pm ] |
| Post subject: | Re: correct prop for 16 gdlt w/ 1448 |
9x4 backwater Inc. prop works real good also BUt 9x3 GD is correct |
|
| Author: | GeeLeDouche [ Tue Aug 30, 2011 1:07 am ] |
| Post subject: | Re: correct prop for 16 gdlt w/ 1448 |
I am running a 9x5 Ron Hill prop on my 16gdlt and I LOOOOOVE it. top end is nothing short of amazing but low end leaves something to be desired. In the thick slop it doesnt perform as well as I think it should. so its a trade off. but the correct prop is a 9x3. |
|
| Page 1 of 1 | All times are UTC - 6 hours |
| Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group http://www.phpbb.com/ |
|