MudmotorTalk.com https://www.mudmotortalk.com/mmt_v2/
low speed RPMs on 23 hp longtail https://www.mudmotortalk.com/mmt_v2/viewtopic.php?f=6&t=28220	Page 1 of 1

---

Author:	power731 [ Thu Apr 05, 2012 5:57 pm ]
Post subject:	low speed RPMs on 23 hp longtail
What RPMs are yall running at idle on 23 longtail?

---

Author:	PaleoHuntr [ Thu Apr 05, 2012 6:04 pm ]
Post subject:	Re: low speed RPMs on 23 hp longtail
I have mine set at 1050 on my 25.

---

Author:	power731 [ Thu Apr 05, 2012 6:12 pm ]
Post subject:	Re: low speed RPMs on 23 hp longtail
I cannt get mine below 1500 without losing top end 3600.

---

Author:	PaleoHuntr [ Thu Apr 05, 2012 6:16 pm ]
Post subject:	Re: low speed RPMs on 23 hp longtail
Yep, that's the problem. Mine top out at 2852, which is fine with me as I like the low idle speeds.

---

Author:	daisy cutter [ Thu Apr 05, 2012 6:25 pm ]
Post subject:	Re: low speed RPMs on 23 hp longtail
mine idles at about 1200 out of the water and about 950-1050 in the water. top end is about 4030 out of water and 3740-3800 in the water. anything lower than 1200 out of water and it stalls when i drop the prop in the water

---

Author:	power731 [ Thu Apr 05, 2012 6:29 pm ]
Post subject:	Re: low speed RPMs on 23 hp longtail
I like that RPm range. May have to do a little tinkerin with throttle

---

Author:	mudduck1448 [ Sun Apr 08, 2012 7:26 pm ]
Post subject:	Re: low speed RPMs on 23 hp longtail
1100 idle and 4090 wot both in the water.

---

Author:	Buzz Killington [ Mon Apr 09, 2012 6:59 am ]
Post subject:	low speed RPMs on 23 hp longtail

---

Author:	power731 [ Mon Apr 09, 2012 6:51 pm ]
Post subject:	Re: low speed RPMs on 23 hp longtail
did my tinkerin today got 1200 low end and 3850 high end. think I can live with this. Had to cut jacket on cable and cut grove in throttle stop. Think I can get a little more on hoigh end if I do little more cuttin.

---

Page 1 of 1	All times are UTC - 6 hours
Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group http://www.phpbb.com/