MudmotorTalk.com https://www.mudmotortalk.com/mmt_v2/ |
|
27 on 14x38 https://www.mudmotortalk.com/mmt_v2/viewtopic.php?f=6&t=28361 |
Page 1 of 1 |
Author: | Duck-killa [ Wed Apr 11, 2012 10:16 pm ] |
Post subject: | 27 on 14x38 |
Will the motor be too back heavy for my 14x38 jon boat. The boat weights around 200 pounds and the motor probably weighs 180 pounds. I was just wondering if its too heavy, and if it is, will i have to put performance pods from beavertail? |
Author: | david95 [ Wed Apr 11, 2012 10:49 pm ] |
Post subject: | Re: 27 on 14x38 |
Yes it will, I have the same motor an tried it on my old 1436 an about sunk it. |
Author: | PaleoHuntr [ Wed Apr 11, 2012 10:52 pm ] |
Post subject: | Re: 27 on 14x38 |
Come on man, this is your second post asking questions that have been discussed many times before. Use the damn search feature at the top of the page! |
Author: | Duck-killa [ Thu Apr 12, 2012 1:38 pm ] |
Post subject: | Re: 27 on 14x38 |
Thankyou for the first reply, and for the second reply, suck my dick |
Author: | Glades Ranger [ Thu Apr 12, 2012 2:19 pm ] |
Post subject: | Re: 27 on 14x38 |
Duck-killa, I started out with an 18 HP Briggs LT on a 1436 jon back in 1989 and it was tricky running with that boat, I was lucky not to have swamped it. A lot of hunters with smaller hulls like yours have experienced good gains with pods. I have read a lot of reports on this site about those small Copperhead surface drives really doing well with 14' hulls. Try and find a local mud motor dealer and take a test drive. Don't get too flustered by some of the "vinegar" you get here, I learned to let it slide by, laugh heartily. ![]() |
Author: | cb5331 [ Thu Apr 12, 2012 2:28 pm ] |
Post subject: | Re: Re: 27 on 14x38 |
Author: | PaleoHuntr [ Thu Apr 12, 2012 3:24 pm ] |
Post subject: | Re: 27 on 14x38 |
![]() ![]() What's the old song? If your gonna be stupid then you gotta be tough? If your going to come on here and ask questions like your first 2 then you had better have a thick skin. |
Author: | indawoods [ Thu Apr 12, 2012 4:25 pm ] |
Post subject: | Re: 27 on 14x38 |
Author: | david95 [ Thu Apr 12, 2012 4:56 pm ] |
Post subject: | Re: 27 on 14x38 |
Page 1 of 1 | All times are UTC - 6 hours |
Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group http://www.phpbb.com/ |