| MudmotorTalk.com https://www.mudmotortalk.com/mmt_v2/ |
|
| First long tail https://www.mudmotortalk.com/mmt_v2/viewtopic.php?f=6&t=30916 |
Page 1 of 1 |
| Author: | mud4fun [ Fri Jul 20, 2012 11:41 am ] |
| Post subject: | First long tail |
First time to change shaft, bushings and seals. I have all the manuals with instruction, just wanted to know if anyone had tips, tricks or pointers. ImageUploadedByTapatalk1342806073.094219.jpg |
|
| Author: | indawoods [ Fri Jul 20, 2012 4:55 pm ] |
| Post subject: | Re: First long tail |
watch the threads when you go past the new seals, it can cut them. easier with 2 people. |
|
| Author: | garjacker [ Fri Jul 20, 2012 8:47 pm ] |
| Post subject: | Re: First long tail |
x2 on the threads and seals, i wrap electrical tape around threads. If you cant get ur prop off dont sweat it if ur changing the shaft. just take the the old shaft and put it in a vice. every time you take off prop always chase threads in prop and shaft. if you have a bushing at top, use a feeler guage .003" and center the bushing by moving the motor. I have a homemade bushing puller, its a 2 foot piece of allthread with a notch in one end and a large weight that slides at the other end. I can do mine in less than an hour. If my bushing at top is good then less than that. |
|
| Page 1 of 1 | All times are UTC - 6 hours |
| Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group http://www.phpbb.com/ |
|