| MudmotorTalk.com https://www.mudmotortalk.com/mmt_v2/ |
|
| Bigger Motor https://www.mudmotortalk.com/mmt_v2/viewtopic.php?f=6&t=31286 |
Page 1 of 1 |
| Author: | bigpun [ Mon Aug 06, 2012 8:02 pm ] |
| Post subject: | Bigger Motor |
I currently have a 25 Hp Vanguard motor on my longtail. Its a18'x60" riveted Jon. Can I unbolt the 25 and put a 35 Hp in it's place? Tired of boggin down with a full load. Or should I go with a SD? |
|
| Author: | Quackkillz [ Tue Aug 07, 2012 8:24 am ] |
| Post subject: | Bigger Motor |
The 35 probably won't bolt right up without a little modification to the frame, more then likely you will have drill some new holes. |
|
| Author: | da go get'er [ Tue Aug 07, 2012 8:28 am ] |
| Post subject: | Re: Bigger Motor |
assuming it's a go-devil brand: I believe the prop shaft is 3/4in on the 25hp motor and 7/8 for the 35hp. also when did vanguard make a 25hp motor I thought they where using koehler engines that were 25hp? |
|
| Author: | Woodiebuster [ Tue Aug 07, 2012 12:08 pm ] |
| Post subject: | Re: Bigger Motor |
If in fact it is a big block 25 Vangaurd (which they make, just not sure if they ever put them on a MM) it will bolt right up with no modifications whatsoever. If its a 25 Kohler its doable If its a 23 Briggs it'll be a chore. |
|
| Page 1 of 1 | All times are UTC - 6 hours |
| Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group http://www.phpbb.com/ |
|