| MudmotorTalk.com https://www.mudmotortalk.com/mmt_v2/ |
|
| First LT build https://www.mudmotortalk.com/mmt_v2/viewtopic.php?f=6&t=38839 |
Page 1 of 1 |
| Author: | Mrm1775 [ Mon Mar 18, 2013 7:30 pm ] |
| Post subject: | First LT build |
My first build---16hp duromax, 1 1/4" DOM,8x4 prop from back..., everything else is a culmination of everything I have seen and some of my own, mounted on a 15/42 alumaweld waterfowl. Didn't have a GPS with me on the first run. With two people I would estimate around 12-14, really depends where the passenger sits. It is slow, but it gets me there. Might need to bend the end of the cab. Plate just a lil, it wants to run about 6"-8" deep to the plate. Tach showed about 3100 at full throttle. The pics might be a lil dark, loosing daylight, and sideways due to iphone. Comments welcome!! |
|
| Author: | dwight37 [ Mon Mar 18, 2013 8:48 pm ] |
| Post subject: | Re: First LT build |
I built pretty much the same motor bout 4yrs ago even got the same prop from arlin!! I had it on a 1460 ran 13mph with 2or 3 people didn't make any difference!! Awesome lil motors for the price!! |
|
| Author: | ds541 [ Tue Mar 19, 2013 9:28 pm ] |
| Post subject: | Re: First LT build |
looks like you did a very nice job.getting ready to start my build as soon as the weather breaks. |
|
| Author: | Boomstickalaskan [ Thu Apr 04, 2013 1:51 pm ] |
| Post subject: | Re: First LT build |
Nice job!!! Like the idea of the bearing on the top. How do you retain the grease? Seals, sealed bearing or does it matter? |
|
| Author: | Mrm1775 [ Thu Apr 04, 2013 3:12 pm ] |
| Post subject: | Re: First LT build |
The shaft housing has seals in it. |
|
| Page 1 of 1 | All times are UTC - 6 hours |
| Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group http://www.phpbb.com/ |
|