| MudmotorTalk.com https://www.mudmotortalk.com/mmt_v2/ |
|
| mufflier split https://www.mudmotortalk.com/mmt_v2/viewtopic.php?f=6&t=51436 |
Page 1 of 1 |
| Author: | bignate176 [ Thu Mar 13, 2014 10:42 pm ] |
| Post subject: | mufflier split |
Hey guys I'm running a 31 HP GDLT. A while back I was greasing her up and just kinda over looking everything and found that my muffler is spit at the seam. No idea how long it's been that way. Haven't taken my rig out since due to the fact that it was end of duck season and all that. I know I need to either fix it or replace it. Since I'm away at school, I don't have access to a welder like I do at home. My question is can I run it with the muffler split or is that gonna cause problems due to lack of back pressure and all that? The split is 6 inches or less long and prob less than 1/4 inch wide. |
|
| Author: | take'emgator [ Thu Mar 13, 2014 10:49 pm ] |
| Post subject: | Re: mufflier split |
Not gonna hurt you to run it but get it fixed when you can |
|
| Author: | bignate176 [ Thu Mar 13, 2014 11:02 pm ] |
| Post subject: | Re: mufflier split |
I got some work coming in the next few months. Hopefully gonna upgrade to a bps no later than May. |
|
| Author: | take'emgator [ Thu Mar 13, 2014 11:19 pm ] |
| Post subject: | Re: mufflier split |
Gotcha, that's a good one and so is the Marsh Mellow from Dan Horton. Either way you can't go wrong |
|
| Page 1 of 1 | All times are UTC - 6 hours |
| Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group http://www.phpbb.com/ |
|