MudmotorTalk.com
https://www.mudmotortalk.com/mmt_v2/

Shaft Size of a 27hp Go Devil Longtail?
https://www.mudmotortalk.com/mmt_v2/viewtopic.php?f=6&t=5393		 Page 1 of 1
Author:  jwz4 [ Fri Oct 16, 2009 3:28 pm ]
Post subject:  Shaft Size of a 27hp Go Devil Longtail?
Does anyone know the shaft size on a 27 hp Go Devil brand longtail or how I could find out what it is on mine. I'm trying to order a new prop.
Author:  kibb [ Fri Oct 16, 2009 3:47 pm ]
Post subject:  Re: Shaft Size of a 27hp Go Devil Longtail?
If you are gonna order straight from Go-Devil just tell them you want the 9x7 or give them you serial # and they can tell you what you need to know.
Author:  jwz4 [ Fri Oct 16, 2009 3:59 pm ]
Post subject:  Re: Shaft Size of a 27hp Go Devil Longtail?
And if I am not ordering from go devil?
Author:  kibb [ Fri Oct 16, 2009 4:43 pm ]
Post subject:  Re: Shaft Size of a 27hp Go Devil Longtail?
Author:  Country [ Fri Oct 16, 2009 5:20 pm ]
Post subject:  Re: Shaft Size of a 27hp Go Devil Longtail?
3/4 10 should be right.
Author:  kibb [ Fri Oct 16, 2009 5:35 pm ]
Post subject:  Re: Shaft Size of a 27hp Go Devil Longtail?
It's most likely 3/4 but the diagram has a ? by the part number. ? denotes call with serial # and model.
Author:  lngtail24 [ Sat Oct 17, 2009 9:21 pm ]
Post subject:  Re: Shaft Size of a 27hp Go Devil Longtail?
do you have a tape measure?
Author:  kibb [ Sun Oct 18, 2009 6:22 am ]
Post subject:  Re: Shaft Size of a 27hp Go Devil Longtail?
Author:  jwz4 [ Sun Oct 18, 2009 9:29 pm ]
Post subject:  Re: Shaft Size of a 27hp Go Devil Longtail?
Author:  kibb [ Mon Oct 19, 2009 5:28 am ]
Post subject:  Re: Shaft Size of a 27hp Go Devil Longtail?
Author:  jwz4 [ Mon Oct 19, 2009 9:02 am ]
Post subject:  Re: Shaft Size of a 27hp Go Devil Longtail?
Do I got my answer the first time I wasn't asking again just trying to explain that I wasn't being an jacka** by the second post. But obviously you don't understand and for that I am sorry. :roll:

Please don't tell me to call go devil again I already have the information I need. And thanks for all of your help. :lol:
Author:  kibb [ Mon Oct 19, 2009 4:39 pm ]
Post subject:  Re: Shaft Size of a 27hp Go Devil Longtail?
This time read this info more slowly.

Regardless


if

you

are

getting

a

prop

from

Go-devil

or

not

call

them

and

give

them

your

info

and

they

will

tell

you

the

prop

size

so

you

can

get

one

elsewhere.

That's all. :lol:
Author:  jwz4 [ Mon Oct 19, 2009 6:21 pm ]
Post subject:  Re: Shaft Size of a 27hp Go Devil Longtail?
Thank

you

for

all

of

your

help!

You

can

8===D :o :lol:
Author:  kibb [ Mon Oct 19, 2009 7:11 pm ]
Post subject:  Re: Shaft Size of a 27hp Go Devil Longtail?
No hard feelings just meet me at Academy I got something for you, my treat. :lol:
Author:  jwz4 [ Mon Oct 19, 2009 8:02 pm ]
Post subject:  Re: Shaft Size of a 27hp Go Devil Longtail?
Seriously though, what kind of speeds are you getting with your setup? I have a 1644 and am getting around 17 to 18 gps with my prop worn down to 8 inches. I was just wondering if I should expect more speed or just low end torque with the new prop?
Author:  kibb [ Mon Oct 19, 2009 8:20 pm ]
Post subject:  Re: Shaft Size of a 27hp Go Devil Longtail?
Damn dude. Looks like nobody had much input and I fuckin tried to help you. Just telling you to call the manufacturer and they would hook you up with the info. I was loking at a damn schematic as I typed and offered the most feasible information I could. Yeah I could measured mine but then again I didn't know if you had the same year model as me or if things changed over the years. Then you go off and tell me to suck it. I help newbees out every chance I can, but shit like this really fucks this site up.
I forgot more about a longtail than you will ever learn, son.
Author:  jwz4 [ Tue Oct 20, 2009 8:31 am ]
Post subject:  Re: Shaft Size of a 27hp Go Devil Longtail?
Oh my bad I though you were just joking around when you were being a azz, sorry guess I didn't figure and almighty longtail father such as yourself would get he panties in a wad over a little joking back and forth that you started. Please don't get your blood pressure up over my posts I was just kidding back and in fact not trying to be a legitimate azz, I guess apparently you were? So let me clear it all up for you, first of all I really do appreciate your advice, second of all I wasn't trying to be a jerk when said "what if I'm not getting it from go devil" it was merely a response to the first part of your statement when you said "if you are getting it from go devil..." because I was looking to buy a prop from a guy online. Third I had called go devil be for I even posted the first post and they wanted my serial number before she would talk to me, she didn't tell me why, being that my boat is at my camp I got on here and was trying to find out if there was a "standard" size, now I know there is not.
Author:  kibb [ Tue Oct 20, 2009 4:26 pm ]
Post subject:  Re: Shaft Size of a 27hp Go Devil Longtail?
First, of all I was not being and ass.

Second, I restated what I said because obviously you did not see the word "or" in my statement.

1. meaning telling them you want a 9 x 7

or if you don't wannna get it from them

2. Give them your serial # and they could tell you your required info.

8===D:o Bitch
Author:  jwz4 [ Tue Oct 20, 2009 7:18 pm ]
Post subject:  Re: Shaft Size of a 27hp Go Devil Longtail?
Pretty original there come back there. My dad could beat your daddy up :lol: :lol: :lol:
Page 1 of 1 All times are UTC - 6 hours
Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group
http://www.phpbb.com/