| MudmotorTalk.com https://www.mudmotortalk.com/mmt_v2/ |
|
| GDLT Kill Switch https://www.mudmotortalk.com/mmt_v2/viewtopic.php?f=6&t=58076 |
Page 1 of 1 |
| Author: | GatorFan321 [ Sun Nov 16, 2014 11:09 pm ] |
| Post subject: | GDLT Kill Switch |
I just bought a used GDLT. It was the 9hp Honda one but has a GX390 on it now cause the previous owner wanted more power. It does not have a kill switch though. It has a toggle switch mounted by the throttle but its broken. The toggle switch is just like this one: http://www.oreillyauto.com/site/c/detai ... &ppt=C0335 There is a little tab with a hole that that type of switch fits into on the handle right by the throttle. I can not find an actual kill switch to go in that tab. Im not sure what year the GD frame is. Does anyone have one like this and have a kill switch on or know of a kill switch that fits into that type of hole? Ive checked all the motocross/boating/automotive placed I can think of. Or do any of you know how to use a toggle switch like that as a reliable kill switch. My mercury 9.9 uses a tether that goes in a toggle switch but in order to get the tether out, it has to be flipped. I dont see how I could rig that toggle switch up to work like that reliably anyway. |
|
| Author: | GatorFan321 [ Mon Nov 17, 2014 9:25 am ] |
| Post subject: | Re: GDLT Kill Switch |
Here's a pic: |
|
| Author: | SwampDonkey1 [ Mon Nov 17, 2014 2:53 pm ] |
| Post subject: | Re: GDLT Kill Switch |
Take a washer and weld it to the bottom of the handle, Take a killswitch from NAPA (http://m.napaonline.com/tablet//parts/P ... 0150638466) and mount it through the washer... One wire grounds out, the other ties into the ignition shut off... |
|
| Page 1 of 1 | All times are UTC - 6 hours |
| Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group http://www.phpbb.com/ |
|