| MudmotorTalk.com https://www.mudmotortalk.com/mmt_v2/ |
|
| Recommended Prop Size https://www.mudmotortalk.com/mmt_v2/viewtopic.php?f=6&t=58312 |
Page 1 of 1 |
| Author: | quackshot [ Sat Nov 29, 2014 8:56 am ] |
| Post subject: | Recommended Prop Size |
18 HP Longtail on a 1546 Xpress Boat 2 people and gear. Currently running a 9 x 6 |
|
| Author: | KaCajun Boy [ Sat Nov 29, 2014 1:04 pm ] |
| Post subject: | Re: Recommended Prop Size |
Lil brother has a 18hp on a 16x36 duck skiff and he can't turn the 9x6 and 9x5 so he's running a 9x4 and gets like 18mph with him, battery and lil over 6 gallon of gas. When he puts the bigger props on they slow him down a lot and also suck in the mud but his 9x4 seems to go good in both mud and speed. |
|
| Author: | SETx Longtail [ Sat Nov 29, 2014 7:23 pm ] |
| Post subject: | Re: Recommended Prop Size |
I'm running a modified 9x4 on my 20hp and she'll tote a decent load. Jumps in plane in about a boat length too. I'd say try at least that. |
|
| Author: | StevefromAR [ Mon Dec 01, 2014 8:06 am ] |
| Post subject: | Re: Recommended Prop Size |
Go devil says 9x6 on their 25 Kohler long tails. My wore out 9x6 turns 3440 rpm. Tried a used in very good shape 9x7 BPS Tiger but couldn't get the rpm I wanted. Dropped to 3000 at WOT with me, dog and my duck gear. Same speed by GPS but the engine sounds like it's lugged down. |
|
| Author: | StevefromAR [ Mon Dec 01, 2014 8:08 am ] |
| Post subject: | Re: Recommended Prop Size |
What kind of shape is your 9x6 in? I need another prop! |
|
| Page 1 of 1 | All times are UTC - 6 hours |
| Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group http://www.phpbb.com/ |
|