| MudmotorTalk.com https://www.mudmotortalk.com/mmt_v2/ |
|
| Longtail Throttle Lever https://www.mudmotortalk.com/mmt_v2/viewtopic.php?f=6&t=68346 |
Page 1 of 1 |
| Author: | TPULL [ Wed Sep 21, 2016 8:13 am ] |
| Post subject: | Longtail Throttle Lever |
Just acquired a Long Tail and the Handle on it is bigger then most around 4" in Diameter. Anyone been able to put a throttle lever like a dirtbike clutch on anything bigger the 7/8 or 1"? Thanks |
|
| Author: | Mark F. Cheney [ Wed Sep 21, 2016 6:24 pm ] |
| Post subject: | Re: Longtail Throttle Lever |
Turn a sleeve to fit the ID of your tiller and 7/8" ID. I make them 2" long and then put a 7/8" x 8" long piece of tubing in the collar. I secure it all together with 2 3/16" stainless pop rivets. works great. I use BMX bike brake handles. Some have longer throw than others. compare them a bit before you buy one. The BMX brake cable works well for the inner cable and I use a poly lined outer housing from the Go Kart world, Asuza is a good distributor source for this. |
|
| Author: | TPULL [ Thu Sep 22, 2016 8:02 am ] |
| Post subject: | Re: Longtail Throttle Lever |
Any Pictures? And thanks for the info |
|
| Page 1 of 1 | All times are UTC - 6 hours |
| Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group http://www.phpbb.com/ |
|