MudmotorTalk.com
https://www.mudmotortalk.com/mmt_v2/

Boat help
https://www.mudmotortalk.com/mmt_v2/viewtopic.php?f=6&t=739
Page 1 of 1

Author:  white1 [ Wed Feb 18, 2009 8:06 pm ]
Post subject:  Boat help

I got a 8hp cause one place I hunt has a 10HP restriction, but I need a V-twin another place I hunt. Im thinking about building a boat to replace my 1436 bateau, and am wondering what size would work best for both a 8hp, and lets say a 23. Im thinking a 1634 or so, my fat friend says 1638. I think 1638 may be a little too much boat for the 8. What yall think? Im thinking I can get up to a 1848 out of a sheet of aluminum, but may can get a smaller sheet. Hell Im willing to go 1632 with 20" sides, but Im part indian :P LOL Id like to go 1634-1638, but dont want it to be too much for the 8, or too small for the 23 ( I dont have a 23 right now, but gonna look for a 16-23 LT)

Author:  quackconsumer [ Wed Feb 18, 2009 8:11 pm ]
Post subject:  Re: Boat help

15.5'x36" just my 2 cents.

Author:  basinhunter [ Wed Feb 18, 2009 8:38 pm ]
Post subject:  Re: Boat help

1638 with 18" sides

Author:  mcnemar1982 [ Wed Feb 18, 2009 9:11 pm ]
Post subject:  Re: Boat help

Bring me a sheet of aluminum and I will show you something!!! 8-)

Author:  quackconsumer [ Sun Feb 22, 2009 7:38 pm ]
Post subject:  Re: Boat help


Author:  mcnemar1982 [ Sun Feb 22, 2009 8:24 pm ]
Post subject:  Re: Boat help


Author:  Gigafowl [ Sun Feb 22, 2009 10:08 pm ]
Post subject:  Re: Boat help

My first GoDevil - an 8 hp LT - in about 1990 or so - was actually a second motor on a 20x72 center console 115 jet...

The 8 hp pushed that boat well in almost no water....

Ran about 5 mph in deep water... Actually got me home twice when
the jet was acting up....

Until IKE - took it - it pushed a 16x48 boat blind on a one mile square lease with extremely heavy vegitation....


So - I would suggest you buy / build the boat that it "right" for the larger motor... The 8 hp will work just fine sub-plane as a plow to get you around wherever you need to go...

Page 1 of 1 All times are UTC - 6 hours
Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group
http://www.phpbb.com/