| MudmotorTalk.com https://www.mudmotortalk.com/mmt_v2/ |
|
| smaller sd prop on lt https://www.mudmotortalk.com/mmt_v2/viewtopic.php?f=6&t=8894 |
Page 1 of 1 |
| Author: | jrp267 [ Tue Apr 06, 2010 8:08 pm ] |
| Post subject: | smaller sd prop on lt |
Hey guys I had a 29 kawi MB hyper. I sold that and currently own a 16 godevil lt. I am wondering if the prop from the kawi which is a 9 in prop would work on the go devil. The kawi was threaded shaft. I don't know if they are the same threads. Or if it will swing it. |
|
| Author: | bundy [ Tue Apr 06, 2010 8:10 pm ] |
| Post subject: | Re: smaller sd prop on lt |
all depends on what size prop is it 9x?? and most likely it will be way to big for ue lt |
|
| Author: | EasTexDux88 [ Tue Apr 06, 2010 8:10 pm ] |
| Post subject: | Re: smaller sd prop on lt |
16 lt slings a 9x4 prop. not sure what the 29 uses. propably a lot more pitch. not sure if it will work or not but the 16 shaft is 3/4x10 thread i believe. i think the 29 uses a 7/8 shaft |
|
| Author: | jrp267 [ Tue Apr 06, 2010 8:30 pm ] |
| Post subject: | Re: smaller sd prop on lt |
you are correct sir the threads dont work. So I will need a prop you say 9x4? Also has anyone changed the throttle to a sqeeze with spring return? and would this jack anything up? |
|
| Author: | EasTexDux88 [ Wed Apr 07, 2010 8:16 am ] |
| Post subject: | Re: smaller sd prop on lt |
Yep, 9x4 for the 16 according to GD website. never tried the throttle. |
|
| Page 1 of 1 | All times are UTC - 6 hours |
| Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group http://www.phpbb.com/ |
|