| MudmotorTalk.com https://www.mudmotortalk.com/mmt_v2/ |
|
| 6.0 down for the count! https://www.mudmotortalk.com/mmt_v2/viewtopic.php?f=7&t=22309 |
Page 1 of 1 |
| Author: | mallardmaster2 [ Mon Sep 19, 2011 6:02 pm ] |
| Post subject: | 6.0 down for the count! |
well today i took my 06 F250 diesel to the shop today because its been running like $hit the last week. So i told him what its been doing and he said i hate to say this but you blew a head gasket! great just what i need only 125,000 miles and its the third time its been in the shop well he said after its fixed i should get another 250,000 miles out of it i hope its true. |
|
| Author: | craig [ Mon Sep 19, 2011 6:33 pm ] |
| Post subject: | 6.0 down for the count! |
What's that gonna cost? |
|
| Author: | dfou [ Mon Sep 19, 2011 6:36 pm ] |
| Post subject: | 6.0 down for the count! |
Common problem with the 6.0. They putting in head studs instead of bolts? |
|
| Author: | DuckHunterF250 [ Mon Sep 19, 2011 6:45 pm ] |
| Post subject: | Re: 6.0 down for the count! |
if you arent putting arp head studs in with it you are just pissing in the wind |
|
| Author: | dfou [ Mon Sep 19, 2011 6:57 pm ] |
| Post subject: | 6.0 down for the count! |
Head studs and an egr delete and you got a pretty solid motor |
|
| Author: | mallardmaster2 [ Mon Sep 19, 2011 7:05 pm ] |
| Post subject: | Re: 6.0 down for the count! |
i dont know yet about the cost probally expensive after everything is fixed and upgraded and yes arp head studs are being put in along with the egr delete and hopefully a new larger turbo and im getting a new tuner |
|
| Author: | Pooh Bear [ Mon Sep 19, 2011 7:10 pm ] |
| Post subject: | Re: 6.0 down for the count! |
| Author: | Pooh Bear [ Mon Sep 19, 2011 7:13 pm ] |
| Post subject: | Re: 6.0 down for the count! |
| Author: | mallardmaster2 [ Mon Sep 19, 2011 7:19 pm ] |
| Post subject: | Re: 6.0 down for the count! |
i pull a 22ft trailer with a bobcat and masonry equipment on it but thats not really that often i have a superchip programed into it now but i wanna get a edge programmer with the gauges built into it and who doesnt like black smoke and going fast! |
|
| Author: | DuckHunterF250 [ Mon Sep 19, 2011 7:20 pm ] |
| Post subject: | Re: 6.0 down for the count! |
| Author: | DuckHunterF250 [ Mon Sep 19, 2011 7:22 pm ] |
| Post subject: | Re: 6.0 down for the count! |
| Author: | mallardmaster2 [ Mon Sep 19, 2011 7:35 pm ] |
| Post subject: | Re: 6.0 down for the count! |
alright thanks for the info i'll give yall up date when it finshed and ill look into the sct x3 |
|
| Author: | T-Bubba [ Mon Sep 19, 2011 7:37 pm ] |
| Post subject: | Re: 6.0 down for the count! |
arp head studs...egr delete, mbrp 4" straight, sct or dp tuner |
|
| Author: | mallardmaster2 [ Mon Sep 19, 2011 7:46 pm ] |
| Post subject: | Re: 6.0 down for the count! |
i already have the 4 inch stright pipe mbrp and superchip with banks high rise intake and green high performance air filter. |
|
| Author: | take'emgator [ Mon Sep 19, 2011 7:56 pm ] |
| Post subject: | Re: 6.0 down for the count! |
Reason it cost so much to do the studs and change head gaskets is cause the whole cab has to be removed on the fords to access the engine, PITA if you ask me, i don't know why they made them that way.....Head studs, EGR delete, 4" MBRP straight piped from the turbo, PCV reroute, and a good spartan toon will make her come alive, 6.0's can make some power but you better have deep pockets, be careful with injector rates cause you can fowl them faster than shit with a miss programmed computer! Good Luck, oh and if you plan on bigger turbo and better beefier tunes you better look into put a tranny under that thing. |
|
| Author: | mallardmaster2 [ Mon Sep 19, 2011 8:08 pm ] |
| Post subject: | Re: 6.0 down for the count! |
yeah i know i might just hold off on the turbo this is going to probally cost 10 grand how it is ! But the guy thats doing the work has done lots of guys in town says he just takes the motor out and leaves the cab on it. cheapier and easier |
|
| Author: | Barroll [ Mon Sep 19, 2011 11:15 pm ] |
| Post subject: | Re: 6.0 down for the count! |
| Author: | MaXXis85 [ Tue Sep 20, 2011 5:52 am ] |
| Post subject: | Re: 6.0 down for the count! |
Egr Delete, ARP headstuds, better oil cooler, and ytou have a SOLID 6.0 truck. You will need a tuner to stop EGR codes Im pretty sure, but a mile tune will only help you not hurt you. My buddy did it to his dad's 6.0 BEFORE he had problems. |
|
| Author: | Chico80x [ Tue Sep 20, 2011 6:08 pm ] |
| Post subject: | Re: 6.0 down for the count! |
I don't know about the rest of the country, but over here the resale values on the 6.0's is horrible. Hopefully Ford got it right with the new 6.7's but it's be a few years before we know for sure. I have an 06 F-150 5.4L with the two piece spark plugs and I didn't know about it till it was time to change them. So when I took it in, the service manager told me changing them would cost me anywhere from $300 to $3000 depending on how many broke. Anyway, I changed them all myself and only one broke but this makes me think that Ford is pulling this type of crap on purpose. You drop anywhere from 30 to 60k for these trucks then they require a major repair down the line that costs an additional 10%+ of what you bought the truck for. I guess we'll see one wonderful surprises they engineered in the new 6.2's and 6.7's. |
|
| Author: | richard nagon [ Tue Sep 20, 2011 8:12 pm ] |
| Post subject: | Re: 6.0 down for the count! |
intertrashanol built the 6.9 7.3 6.0 6.4 for ford blame them. |
|
| Author: | MaXXis85 [ Wed Sep 21, 2011 6:08 am ] |
| Post subject: | Re: 6.0 down for the count! |
| Page 1 of 1 | All times are UTC - 6 hours |
| Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group http://www.phpbb.com/ |
|