| Author |
Message |
|
OwenDickeson
MMT Elite Member
Joined: Wed Mar 11, 2009 12:45 pm Posts: 9869
|
 18x4 Brother Breaux Skiff w/ 36PD "Fuk all of yall edition"
MM Brand: ProDrive Horsepower: Stage 1 50hp??? Boat Brand: B&B Fab Boat Size: 18x4 Boat Layout: Open w/ drivers seat
Speeds | Shallow Water: None Speeds | Deep Water: elevnty billion miles per hour. Total Boat Load With Gear Etc: Me and full tank of gas
Comments: The boat is 3/16ths bottom with 21" tall 1/8 inch sides and 20" 3/16ths transom. It's braced by 6 2x2 longitudinal ribs and 4 2x2 thick wall cross braces. Standard drain plug on the starboard side and 2" plug on port. Half pipe on the inside of the sides for additional support and used to run gas lines and electrical wires. It has a small sunken deck and a built in gas tank that holds somewhere in the range of 13 gallons. I also had Brother weld in some rod between the trim tabs and the transom for strapping down the motor. The boat runs and handles extremely well. My wifes camera was dead so all I have for now are some cell phone pictures, hopefully I can switch them out with some better ones in the near future. On a side note, I am just happy to have a boat that doesnt have such an expensive paint job like my last one, and I won't feel bad when I fuk it up.
|
| Tue May 18, 2010 4:54 pm |
|
 |
|
DeathMetalDukk
MMT 1000 Club
Joined: Sat Jun 27, 2009 11:50 pm Posts: 3777 Location: Knotts Island, North Carolina.
|
 Re: 18x4 Brother Breaux Skiff w/ 36PD
Dude that's a tough lookin boat, you could storm a beach with that thing. I like those wide gunnels.
_________________ Put yer face in the myrtles.
35 GTR chasing a 1650 Polarkrap.
|
| Tue May 18, 2010 4:59 pm |
|
 |
|
marsh bandit
MMT Addict
Joined: Wed Jan 14, 2009 12:02 pm Posts: 584 Location: Pearland, Texas
|
 Re: 18x4 Brother Breaux Skiff w/ 36PD
Looking real god bro! Deffinatly looks like a tough sob! Did you get tired of the gun boxes or what?
_________________ Sold my boat so now im ridin in a cozy pick-up truck to the blind to shoot ducks and a 60' Hatteras to catch fish on
|
| Tue May 18, 2010 5:24 pm |
|
 |
|
OwenDickeson
MMT Elite Member
Joined: Wed Mar 11, 2009 12:45 pm Posts: 9869
|
 Re: 18x4 Brother Breaux Skiff w/ 36PD
Just something different, plus im tryin to find a layout boat that I can haul in my hull so I wanted to leave the floor plan open. Also my wife doesn't go in the boat much since the kid and if she does I can strap in a fold up chiar, and all the other tag along mf'ers can sit their ass on the floor.
|
| Tue May 18, 2010 5:41 pm |
|
 |
|
quack addict
MMT Addict
Joined: Tue Jan 13, 2009 5:44 pm Posts: 620 Location: Metairie, LA
|
 Re: 18x4 Brother Breaux Skiff w/ 36PD
that's a tank of a hull!!! i think breaux is makin one of the nicest hulls i have seen these days
_________________ "I have been blessed with many things in this life, an arm like a rocket, a c*ck like a Burmese Python and a mind of a f*ckin scientist." -Kenny F*ckin Powers
Gator Trax 3-Man Gatorhide with a Mud Buddy HD Sport 5000
Large Big Green Egg with rounded chines
|
| Tue May 18, 2010 5:44 pm |
|
 |
|
DeathMetalDukk
MMT 1000 Club
Joined: Sat Jun 27, 2009 11:50 pm Posts: 3777 Location: Knotts Island, North Carolina.
|
 Re: 18x4 Brother Breaux Skiff w/ 36PD
_________________ Put yer face in the myrtles.
35 GTR chasing a 1650 Polarkrap.
|
| Tue May 18, 2010 7:40 pm |
|
 |
|
med
MMT Elite Member
Joined: Wed Jan 14, 2009 8:25 am Posts: 6432 Location: the dark side of the moon
|
 Re: 18x4 Brother Breaux Skiff w/ 36PD
_________________ 1850 & 36pd
|
| Wed May 19, 2010 1:40 am |
|
 |
|
Joe M
MMT 1000 Club
Joined: Tue Nov 03, 2009 6:24 pm Posts: 1025 Location: Tyler, TX
|
 Re: 18x4 Brother Breaux Skiff w/ 36PD
nice!
_________________ "You may all go to hell, as for me I'm going to Texas" D. Crockett
What is best in life?
To crush your enemies, to see them driven before you, and to hear the lamentations of their women.
|
| Wed May 19, 2010 3:40 am |
|
 |
|
roadgoeson20
MMT Member
Joined: Mon Nov 02, 2009 10:04 am Posts: 24
|
 Re: 18x4 Brother Breaux Skiff w/ 36PD
That Thing looks like a battleship!
Looks Great Owen.
|
| Wed May 19, 2010 7:50 am |
|
 |
|
Sand Man
MMT F.E.
Joined: Thu Jan 15, 2009 9:57 am Posts: 994 Location: Fort Worth, TX
|
 Re: 18x4 Brother Breaux Skiff w/ 36PD
18X4? That thing looks wider than 4" to me, but maybe it's just the crappy cell phone pics! 
_________________ "Fight 'em until hell freezes over. Then fight 'em on the ice!"
|
| Wed May 19, 2010 7:58 am |
|
 |
|
duckhunter888
MMT F.E.
Joined: Wed Jan 14, 2009 10:44 pm Posts: 828 Location: North Texas
|
 Re: 18x4 Brother Breaux Skiff w/ 36PD
_________________ Crisis defines character
|
| Wed May 19, 2010 8:52 am |
|
 |
|
OwenDickeson
MMT Elite Member
Joined: Wed Mar 11, 2009 12:45 pm Posts: 9869
|
 Re: 18x4 Brother Breaux Skiff w/ 36PD
|
| Wed May 19, 2010 1:26 pm |
|
 |
|
mcnemar1982
MMT Sponsor
Joined: Mon Jan 19, 2009 4:03 pm Posts: 2216 Location: Walker, Louisiana
|
 Re: 18x4 Brother Breaux Skiff w/ 36PD
Thats a fine a$$ skiff!!!!!! 
_________________ Ideas not coupled with action never become bigger than the brain cells they occupied.
Owner DEEP SOUTH CUSTOM BOATS (225) 252-2700 Good boats ain't cheap, Cheap boats ain't good!
|
| Wed May 19, 2010 4:11 pm |
|
 |
|
cmelvin
MMT 1000 Club
Joined: Fri Nov 13, 2009 8:47 pm Posts: 1039 Location: Texas
|
 Re: 18x4 Brother Breaux Skiff w/ 36PD
man im not a big fan of skiffs, they just aint my style. but i tell ya what, that is a dam good lookin boat right there owen. your old boat was more my style but i think this was looks just as good if not better.
_________________ To be successful, you must decide exactly what you want to accomplish, then resolve to pay the price to get it.
|
| Wed May 19, 2010 4:41 pm |
|
 |
|
jus10inla
MMT 1000 Club
Joined: Tue Jan 13, 2009 5:55 pm Posts: 1636 Location: Baton Rouge, LA (Central)
|
 Re: 18x4 Brother Breaux Skiff w/ 36PD
|
| Wed May 19, 2010 4:49 pm |
|
 |
|
mcnemar1982
MMT Sponsor
Joined: Mon Jan 19, 2009 4:03 pm Posts: 2216 Location: Walker, Louisiana
|
 Re: 18x4 Brother Breaux Skiff w/ 36PD
_________________ Ideas not coupled with action never become bigger than the brain cells they occupied.
Owner DEEP SOUTH CUSTOM BOATS (225) 252-2700 Good boats ain't cheap, Cheap boats ain't good!
|
| Thu May 20, 2010 6:17 am |
|
 |
|
dpd
MMT Addict
Joined: Thu May 07, 2009 10:25 am Posts: 714 Location: Thibodaux, LA
|
 Re: 18x4 Brother Breaux Skiff w/ 36PD
Gotta' love that "armored plate" on the front nose. That has "get outta' my way" written all over it.
Nice rig.
_________________ 16 x 48 Blanchard Bateau / 40 PD FPR Eat,Sleep, Fish, Hunt. Repeat.
|
| Mon May 24, 2010 7:07 pm |
|
 |
|
Gatorpoint
MMT 1000 Club
Joined: Tue Jan 13, 2009 8:09 pm Posts: 1175 Location: A slough behind you, TEXAS
|
 Re: 18x4 Brother Breaux Skiff w/ 36PD
_________________ 1854 Brotha Breaux Bateau pullin' a 35 GT arrrrahhh! Willett Welding custom boat trailer
A$$, Ca$h, or Ga$ -- NO FREE RIDES!!
|
| Mon May 24, 2010 8:14 pm |
|
 |
|
quackconsumer
MMT Elite Member
Joined: Wed Jan 14, 2009 7:54 pm Posts: 5582
|
 Re: 18x4 Brother Breaux Skiff w/ 36PD
Looks good bro.
|
| Thu Jun 03, 2010 1:00 pm |
|
 |
|
eazy89
MMT Pro Member
Joined: Wed Mar 25, 2009 7:28 am Posts: 132
|
 Re: 18x4 Brother Breaux Skiff w/ 36PD
So what is the benefit of having the skiff boat over the standard mud boat? Does it handle waves better or does it still smack you to death?
|
| Mon Jul 26, 2010 7:37 pm |
|
 |
|
jus10inla
MMT 1000 Club
Joined: Tue Jan 13, 2009 5:55 pm Posts: 1636 Location: Baton Rouge, LA (Central)
|
 Re: 18x4 Brother Breaux Skiff w/ 36PD
If u have to ask.. U dont need one. Trust me.
|
| Mon Jul 26, 2010 7:41 pm |
|
 |
|
Fowltalker
MMT Pro Member
Joined: Fri Jun 18, 2010 9:52 pm Posts: 74 Location: Santa Claus, Indiana
|
 Re: 18x4 Brother Breaux Skiff w/ 36PD
Nice looking boat!!!
_________________ 1648 weldbilt pushed by a Mudbuddy 35hd " People are like slinkies pretty well useless, until you see one go down the stairs then you smile."
|
| Mon Jul 26, 2010 7:45 pm |
|
 |
|
diceman
MMT Pro Member
Joined: Wed Nov 18, 2009 6:13 pm Posts: 409 Location: ct
|
 Re: 18x4 Brother Breaux Skiff w/ 36PD
_________________ Life is like rolling the Dice
|
| Mon Jul 26, 2010 8:13 pm |
|
 |
|
ducman
MMT Pro Member
Joined: Sun Feb 07, 2010 8:18 pm Posts: 62
|
 Re: 18x4 Brother Breaux Skiff w/ 36PD
can you give the info to the man that built the boat
|
| Tue Aug 03, 2010 2:57 pm |
|
 |
|
cb5331
MMT Super Elite Member
Joined: Fri Dec 18, 2009 8:10 pm Posts: 16915 Location: Rowlett, TX
|
 Re: 18x4 Brother Breaux Skiff w/ 36PD
|
| Tue Aug 03, 2010 3:55 pm |
|
 |
|
cb5331
MMT Super Elite Member
Joined: Fri Dec 18, 2009 8:10 pm Posts: 16915 Location: Rowlett, TX
|
 Re: 18x4 Brother Breaux Skiff w/ 36PD
|
| Tue Aug 03, 2010 3:58 pm |
|
 |
|
OwenDickeson
MMT Elite Member
Joined: Wed Mar 11, 2009 12:45 pm Posts: 9869
|
 Re: 18x4 Brother Breaux Skiff w/ 36PD "Fuk all of yall editi
It's fo sale bitches...
|
| Wed Jun 08, 2011 7:57 pm |
|
 |
|
slambin
MMT 1000 Club
Joined: Mon Feb 16, 2009 10:21 pm Posts: 1262 Location: St. Francisville, LA
|
 Re: 18x4 Brother Breaux Skiff w/ 36PD "Fuk all of yall editi
_________________ 2060 CC 3/4 Gator-tail 1/4 Brother Breaux Boat /35GTR Cowboy thought- a thong on a woman is like a barbed wire fence. It protects the property but doesnt obstruct the view.
|
| Wed Jun 08, 2011 8:07 pm |
|
 |
|
OwenDickeson
MMT Elite Member
Joined: Wed Mar 11, 2009 12:45 pm Posts: 9869
|
 Re: 18x4 Brother Breaux Skiff w/ 36PD "Fuk all of yall editi
Its in the driveway...I'm ballin like dat.
|
| Wed Jun 08, 2011 8:08 pm |
|
 |
|
deltaduckmaster
MMT Sponsor
Joined: Tue Jan 13, 2009 7:07 pm Posts: 16608
|
 18x4 Brother Breaux Skiff w/ 36PD "Fuk all of yall edition"
_________________ 17x48 extreme stage 2 GTR 20X60 DUAL RIG BOWFISHING ADDITION http://www.scalesandtailsbowfishing.com
|
| Wed Jun 08, 2011 8:09 pm |
|
 |
|
OwenDickeson
MMT Elite Member
Joined: Wed Mar 11, 2009 12:45 pm Posts: 9869
|
 Re: 18x4 Brother Breaux Skiff w/ 36PD "Fuk all of yall editi
Gotta ask mamma first...
|
| Wed Jun 08, 2011 8:12 pm |
|
 |
|
dog walker
MMT Elite Member
Joined: Tue Jan 13, 2009 6:08 pm Posts: 5282 Location: Meraux,La.
|
 Re: 18x4 Brother Breaux Skiff w/ 36PD "Fuk all of yall editi
shit you gonna start taking up a whole screen with just your boat discriptions
|
| Wed Jun 08, 2011 8:13 pm |
|
 |
|
dguidry
MMT Super Elite Member
Joined: Tue Jun 29, 2010 1:20 pm Posts: 11166 Location: Cecilia, LA
|
 Re: 18x4 Brother Breaux Skiff w/ 36PD "Fuk all of yall editi
My pointed skiff can go down a crawfish mudhole and not touch the sides. It'll also knock your ass down if you hit a wake at an oblique angle.
_________________ Formerly:1648 Homemade Cypress Crawfish Skiff GTR23 Performance Cam and Heads; 17x46 Gator Tail with 35GTR and Hoyt's cam;s Currently: 17x48 Gator Tail with XD40 EFI. “Wisdom is not just expertise. It is knowing how much of various areas of expertise you need to know in order to make the decisions that the world needs and that you want to do,” Columbia University President Lee Bollinger.
|
| Wed Jun 08, 2011 8:18 pm |
|
 |
|
Gatorpoint
MMT 1000 Club
Joined: Tue Jan 13, 2009 8:09 pm Posts: 1175 Location: A slough behind you, TEXAS
|
 Re: 18x4 Brother Breaux Skiff w/ 36PD "Fuk all of yall editi
_________________ 1854 Brotha Breaux Bateau pullin' a 35 GT arrrrahhh! Willett Welding custom boat trailer
A$$, Ca$h, or Ga$ -- NO FREE RIDES!!
|
| Wed Jun 08, 2011 8:19 pm |
|
 |
|
OwenDickeson
MMT Elite Member
Joined: Wed Mar 11, 2009 12:45 pm Posts: 9869
|
 Re: 18x4 Brother Breaux Skiff w/ 36PD "Fuk all of yall editi
|
| Wed Jun 08, 2011 8:20 pm |
|
 |
|
OwenDickeson
MMT Elite Member
Joined: Wed Mar 11, 2009 12:45 pm Posts: 9869
|
 Re: 18x4 Brother Breaux Skiff w/ 36PD "Fuk all of yall editi
|
| Wed Jun 08, 2011 8:21 pm |
|
 |
|
dguidry
MMT Super Elite Member
Joined: Tue Jun 29, 2010 1:20 pm Posts: 11166 Location: Cecilia, LA
|
 Re: 18x4 Brother Breaux Skiff w/ 36PD "Fuk all of yall editi
Owen: your signature is a pain in the arse to scroll through. Scrunch it up a bit won't you,please.
_________________ Formerly:1648 Homemade Cypress Crawfish Skiff GTR23 Performance Cam and Heads; 17x46 Gator Tail with 35GTR and Hoyt's cam;s Currently: 17x48 Gator Tail with XD40 EFI. “Wisdom is not just expertise. It is knowing how much of various areas of expertise you need to know in order to make the decisions that the world needs and that you want to do,” Columbia University President Lee Bollinger.
|
| Wed Jun 08, 2011 9:18 pm |
|
 |
|