|
|
FAQ
• Login
|
|
It is currently Sun Jul 13, 2025 11:48 am
|
|
Page 1 of 1
|
[ 12 posts ] |
|
| Author |
Message |
|
CCC
MMT 1000 Club
Joined: Sun Jan 01, 2012 9:25 am
Posts: 1685
|
 3 blade gdsd prop? It's about time for a new prop on my 23.called go devil and they said the new motors come with a 3 blade and if you put a 2 blade on it will void the warranty. They also said I will need to re gear my lower unit to run it. So is it worth the all the extra money to redo it for the 3 blade or just go back with a 2 blade? They said they would do it for like 800$ I'm thinking unless there is a big mph gain screw that noise
|
| Tue Feb 28, 2012 2:21 pm |
|
|
|
SmokeEater829
MMT 1000 Club
Joined: Sat Jun 13, 2009 8:48 pm
Posts: 1830
Location: Belle Chasse, LA
|
3 blade gdsd prop? I'm guessing that they want you to regear that 23 cuz it don't have the ass to turn that 3 blade. I ran the 3 blade when I had my 35 GDSD. It was nice, a lot less vibration than the 2 blade. Not sure of any speed difference. I'd probably buy a new 2 blade and some mods before I regeared for the 3 blade.
_________________
Mud Buddy 4500 Black Death hauling the Uncle J 18x58
|
| Tue Feb 28, 2012 2:30 pm |
|
|
|
CCC
MMT 1000 Club
Joined: Sun Jan 01, 2012 9:25 am
Posts: 1685
|
3 blade gdsd prop? Thats what I'm thinking thanks
|
| Tue Feb 28, 2012 2:47 pm |
|
|
|
Robn1020
MMT 1000 Club
Joined: Mon Feb 16, 2009 6:09 pm
Posts: 4232
Location: Cypress, TX
|
Re: 3 blade gdsd prop? 800 dollars?????? Seriously? That really doesn't sound right at all. Pulleys are cheap. Hell the whole shaft unit is 100 bucks. What all does that include? Prop, pulleys, new shaft??? Still doesn't add up.
|
| Tue Feb 28, 2012 2:49 pm |
|
|
|
CLICKSTER
MMT 1000 Club
Joined: Sat Feb 12, 2011 4:08 pm
Posts: 1552
|
Re: 3 blade gdsd prop? labor gonna be a few hours just getting the old prop off!  sorry i had to!
|
| Tue Feb 28, 2012 2:52 pm |
|
|
|
Robn1020
MMT 1000 Club
Joined: Mon Feb 16, 2009 6:09 pm
Posts: 4232
Location: Cypress, TX
|
Re: 3 blade gdsd prop?
|
| Tue Feb 28, 2012 3:00 pm |
|
|
|
CLICKSTER
MMT 1000 Club
Joined: Sat Feb 12, 2011 4:08 pm
Posts: 1552
|
Re: 3 blade gdsd prop? but labor itself i'm guessing was the extra expense?
|
| Tue Feb 28, 2012 3:00 pm |
|
|
|
CCC
MMT 1000 Club
Joined: Sun Jan 01, 2012 9:25 am
Posts: 1685
|
3 blade gdsd prop? Ya labor was the cost
|
| Tue Feb 28, 2012 3:03 pm |
|
|
|
Robn1020
MMT 1000 Club
Joined: Mon Feb 16, 2009 6:09 pm
Posts: 4232
Location: Cypress, TX
|
Re: 3 blade gdsd prop?
|
| Tue Feb 28, 2012 3:04 pm |
|
|
|
CCC
MMT 1000 Club
Joined: Sun Jan 01, 2012 9:25 am
Posts: 1685
|
3 blade gdsd prop?
|
| Tue Feb 28, 2012 3:07 pm |
|
|
|
CCC
MMT 1000 Club
Joined: Sun Jan 01, 2012 9:25 am
Posts: 1685
|
3 blade gdsd prop? 450$ for parts and 65$ an hour so they said it would take no more than 2 hours
|
| Tue Feb 28, 2012 3:14 pm |
|
|
|
white1
MMT Addict
Joined: Thu Jan 15, 2009 9:33 am
Posts: 722
|
Re: 3 blade gdsd prop? The prop is $275 I believe. Just bought one about a month and a half ago.
_________________
Just your basic cracka ass cracka
1840 gator tail with 35GTR
15xx Bateau with 15 honda
|
| Sat Mar 03, 2012 2:46 pm |
|
|
|
|
|
Page 1 of 1
|
[ 12 posts ] |
|
Who is online |
Users browsing this forum: No registered users and 37 guests |
|
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum
|
|
