It is currently Sun Jul 20, 2025 3:41 pm




Reply to topic  [ 13 posts ] 
 Trailer modification (removable tongue) 
Author Message
MMT Pro Member

Joined: Wed Nov 28, 2012 8:54 pm
Posts: 142
Location: Katy, tx
Post Trailer modification (removable tongue)
I thought I'd share some pics of the modifications I had done to my trailer. My neighborhood has an hoa, so I have to keep my boat in the garage, or pay for storage. McLain trailer can only install a swing away tounge on a square framed tounge, and they said they would not do any work to the tounge becase it was rectangular. I found a retired guy that does welding, he built me a removable tounge for $180. He used 3/8 alluminum plate to build a box, and welded it to the tounge. 2 1/2 bolts back up incase the welds fail, and 2 5/8 pins connect everything together. Ran my wires underneath with a conntection in the middle.

I've probably pulled it 1000 miles since its been done, with no problems. It's not the prettiest thing, but it works for me.


You do not have the required permissions to view the files attached to this post.


Fri May 10, 2013 11:00 am
Profile
MMT F.E.

Joined: Thu Sep 10, 2009 11:33 am
Posts: 933
Location: Hell...
Post Re: Trailer modification (removable tongue)
Nice solution.

I feel your pain with the HOA, me too. I have to unbolt the tiller on my LT, and had to put a Fulton swing on it and I have 2.5 inches to spare...

And maneuver the boat around an antique upright piano... (Anyone want a piano?? Free to anyone who picks it up.)

_________________
How can liberals function with their heads shoved so far up their fucking asses???


Fri May 10, 2013 11:16 am
Profile
MMT Pro Member

Joined: Wed Nov 28, 2012 8:54 pm
Posts: 142
Location: Katy, tx
Post Re: Trailer modification (removable tongue)
Well that's an 18 ft boat, on a trailer built for a 20ft boat. I have to push it in by hand to get the angle right. I have 6"-12" to spare on either side depending how it goes in.


Fri May 10, 2013 11:22 am
Profile
MMT Elite Member
User avatar

Joined: Thu Jan 13, 2011 7:32 am
Posts: 5210
Location: Beaumont Texas
Post Re: Trailer modification (removable tongue)
Ive been looking to get a piano for the boys to learn to play on...where are you located danimalw?

_________________
You can't see the sunrise if your eyes are closed.
dying aint much of a livin....

Black ops IITX marshstalker


1840 WC www.wccustomboats.com
fuel injected 25 GTR


Fri May 10, 2013 11:29 am
Profile
MMT F.E.

Joined: Thu Sep 10, 2009 11:33 am
Posts: 933
Location: Hell...
Post Re: Trailer modification (removable tongue)
Md. Might be cheaper to get one down there with the distance. But you are more than welcome to come up to get it. ;-)

_________________
How can liberals function with their heads shoved so far up their fucking asses???


Fri May 10, 2013 11:34 am
Profile
MMT Elite Member

Joined: Fri Jul 08, 2011 1:54 pm
Posts: 8133
Post Re: Trailer modification (removable tongue)
I put a Fulton Swing a Way on mine. Do they not make one for your size? The wires don't have that extra connector as well.


_________________
Before the internet, the majority of the village idiots stayed in their villages.


Fri May 10, 2013 11:57 am
Profile
MMT Pro Member

Joined: Wed Nov 28, 2012 8:54 pm
Posts: 142
Location: Katy, tx
Post Re: Trailer modification (removable tongue)
I never did any shopping for anything, called McLain and then this guy. My tongue is 3x5 I think, or something like that.


Fri May 10, 2013 1:48 pm
Profile
MMT Pro Member
User avatar

Joined: Fri Jan 11, 2013 8:23 am
Posts: 482
Post Re: Trailer modification (removable tongue)
I have the Fulton swing away on my trailer as well. OP, looks like that's working for ya, not bad.


Fri May 10, 2013 2:13 pm
Profile
MMT Elite Member
User avatar

Joined: Tue Sep 13, 2011 11:46 am
Posts: 5216
Location: Across the Bayou, LA
Post Re: Trailer modification (removable tongue)
How do ya'll like those Fulton Swing away brackets? Did you notice any loss of strength in the trailer tongue?

_________________
35 GTR - 1754 Extreme



Fri May 10, 2013 2:23 pm
Profile
MMT Elite Member

Joined: Fri Jul 08, 2011 1:54 pm
Posts: 8133
Post Re: Trailer modification (removable tongue)
They're rated for 3500 pounds, stronger than the aluminum. I had one on my other rig, never had any problems.

_________________
Before the internet, the majority of the village idiots stayed in their villages.


Fri May 10, 2013 5:02 pm
Profile
MMT Pro Member

Joined: Sun Jun 03, 2012 4:41 pm
Posts: 485
Post Re: Trailer modification (removable tongue)
Will, I love the new avatar! :D

_________________
1648 gd hull flying in front of a stage 3 with fpr


Fri May 10, 2013 5:38 pm
Profile
MMT F.E.

Joined: Thu Sep 10, 2009 11:33 am
Posts: 933
Location: Hell...
Post Re: Trailer modification (removable tongue)

_________________
How can liberals function with their heads shoved so far up their fucking asses???


Fri May 10, 2013 5:53 pm
Profile
MMT Addict

Joined: Sat Jan 17, 2009 7:17 pm
Posts: 617
Location: Idaho
Post Re: Trailer modification (removable tongue)
Fulton Swing-Away...love mine.


Sun May 19, 2013 10:40 am
Profile
Display posts from previous:  Sort by  
Reply to topic   [ 13 posts ] 

Who is online

Users browsing this forum: No registered users and 117 guests


You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

Jump to: