Well I ended up canceling my hydroturf order because they are out of the wood grain color and it has been discontinued. I ended up getting best step mats at menards because they stock it locally rather than order a different color hydroturf. I got the bow and pod seating pieces cut and glued down . I have 1 section of the floor cut and hope to finish gluing and get the edges trimmed tomorrow after work. Between a 12 pack of past and sniffing Weldwood for a few hours I got one he'll of a buzz

That's what I have. It's nice jus make sure u use enough glue to cover the hole surface. And don't hit wit pressure washer to close

I do rubber fab for a living and we do quite a few custom belts that have sponge glued to the belts using a contact adhesive. We always do 2 coats each side so that's what im doing for this. Its got plenty of glue definitely will have to grind it off if it needs replacing.

That's a working mans beer PBR. Looks good


Sent from the company's iPad while at work

The buzz was from the glue ! No way you got it from that water you guys call beer down there

you don't know what your talking about Milwaukee knows how to make great beer. I get 2 cases of pabst a month for storing a boat in my garage and We have plenty of local breweries around. I Like IPA's and ales with a lot of hopps. But for everyday drinking and getting work done its always pabst. If im relaxing Ill sit around and enjoy quality beers. I have had your molsons canadian beer my neighbor works for miller and they brew that shit there so he brings me a free case here and there if it wasnt free I wouldnt have even considered drinkin that piss.

^ damn right Milwaukee makes great beer...its probably the only thing Milwaukee has...and lake Michigan. I'm the same way, Pabst for everyday drinking and ales/ambers if I want quality. Louie's Demise is some good stuff! Boat is looking good by the way. Did u ever figure out what u are doing with your heads?

1756 Phowler 36PD

Just got the valves and shims today from PVT. I have a 9 day fishing trip leaving friday so I am going to tear into the motor and bring the heads into and get them decked P&P and valves installed after I get back. While that going on Ill port the stock carb to intake adapter to fit the stock 35 HP carb that hopefully came today as well. I am also going to port match the intake as well since its apart.

Sounds like you have your work cut out for you. Good luck fishing

1756 Phowler 36PD

Well with help from my good friend pabst and some more ambition I finished laying the flooring. For the most part it went well a few hiccups its not perfect but looks pretty damn good for a hundred buck and a case of beer worth of work.

On a side note I got the stock 35 carb from Boat DR I ordered Friday. I was happy to see it had the carb to intake adapter and a fuel line for hook up attached. It saves me some work modifying my 23 hp intake adapter to accept the larger 35 hp carb. The casting is a little rough so if there's a hot bright sunny shitty day for fishing I will do some sanding and polishing the castings on the carb while Im on vacation.

Nice job! Pabst is good beer bros! I do like a Canadian beer called I think Marclays or something like that. We drink a bunch of that when were way north of the border killing SJBP geese. Good stuff!

Tinman if you can bring a case of it with you to mayhem ill buy it from ya!

Lemme know.

next weekend will be a great time at the Mitten Mayhem my Canadian brother!