Author |
Message |
dwight37
MMT Pro Member
Joined: Sat Sep 03, 2011 8:31 pm Posts: 375
|
 bilge discharge on a hunt deck
Getting everything wrapped up on new hull and was needing ideals on where everyone has their discharge hose and thru hull connector on their hunt deck hull
Wanting to keep it from looking too ghetto
|
Fri Mar 06, 2015 2:00 pm |
|
 |
krazo
MMT Addict
Joined: Thu Sep 06, 2012 8:44 pm Posts: 667 Location: SE Bama
|
 Re: bilge discharge on a hunt deck
Mine is on the side of the boat.
Sent from my iPad using Tapatalk
_________________ 1754 prodigy- stage 2 GTR
|
Fri Mar 06, 2015 2:02 pm |
|
 |
krazo
MMT Addict
Joined: Thu Sep 06, 2012 8:44 pm Posts: 667 Location: SE Bama
|
 Re: bilge discharge on a hunt deck
Like this
You do not have the required permissions to view the files attached to this post.
_________________ 1754 prodigy- stage 2 GTR
|
Fri Mar 06, 2015 2:07 pm |
|
 |
dwight37
MMT Pro Member
Joined: Sat Sep 03, 2011 8:31 pm Posts: 375
|
 Re: bilge discharge on a hunt deck
Back under the deck?
|
Fri Mar 06, 2015 2:11 pm |
|
 |
dwight37
MMT Pro Member
Joined: Sat Sep 03, 2011 8:31 pm Posts: 375
|
 Re: bilge discharge on a hunt deck
Ya got a inside pic of it? Just my luck I'd rip the hose into if it's up high on the wall
|
Fri Mar 06, 2015 2:18 pm |
|
 |
krazo
MMT Addict
Joined: Thu Sep 06, 2012 8:44 pm Posts: 667 Location: SE Bama
|
 Re: bilge discharge on a hunt deck
It is under the catwalk
You do not have the required permissions to view the files attached to this post.
_________________ 1754 prodigy- stage 2 GTR
|
Fri Mar 06, 2015 2:27 pm |
|
 |
270Handiman
MMT 1000 Club
Joined: Thu Dec 29, 2011 10:46 pm Posts: 2342 Location: Mandeville, LA
|
 Re: bilge discharge on a hunt deck
Side discharge like above is the way to go.
|
Fri Mar 06, 2015 3:02 pm |
|
 |
Smoke
MMT 1000 Club
Joined: Fri Jan 23, 2009 1:27 pm Posts: 1095 Location: SW Michigan
|
 Re: bilge discharge on a hunt deck
On the port side right in front of the drop deck. I've got twin 1500 gph rules with a jr. System. So I've got two outlets coming out the side of the boat. Pumps so much water I can almost steer with it. 
_________________ 1854 Prodigy Open HDR/Stage 3 mods Prodigy Boats Pro Staff BPS Swamp Staff Member Blackwater Marine LLC.
Quote classic by rangerp: "Red seemed to be enjoying herself, and I assume by the look on her face was about to hit the high-note and throw a locate as she treed the possum."
|
Fri Mar 06, 2015 3:59 pm |
|
 |
270Handiman
MMT 1000 Club
Joined: Thu Dec 29, 2011 10:46 pm Posts: 2342 Location: Mandeville, LA
|
 Re: bilge discharge on a hunt deck
IMG-20121014-00883.JPG
You do not have the required permissions to view the files attached to this post.
|
Fri Mar 06, 2015 4:23 pm |
|
 |
BayouRunner
MMT Pro Member
Joined: Sun Mar 21, 2010 5:11 pm Posts: 94
|
 Re: bilge discharge on a hunt deck
Put two in mine as well. Put a 500 gallon automatic for when I leave the boat in the water and have a 1500 gallon one as well. May seem like overkill but I've been boating a long time. Sooner or later that one time you have it you will be glad it's there. Both come out the side as well. Not wired on the same fuse
|
Fri Mar 06, 2015 5:27 pm |
|
 |
baron von
MMT 1000 Club
Joined: Tue Jan 21, 2014 2:52 pm Posts: 2806 Location: Minnesota
|
 Re: bilge discharge on a hunt deck
_________________ that's going itch when it dries
|
Fri Mar 06, 2015 5:40 pm |
|
 |
DmaxHunter
MMT 1000 Club
Joined: Wed Jan 18, 2012 7:21 pm Posts: 2207 Location: North Alabama
|
 Re: bilge discharge on a hunt deck
Mine exits out side aswell
You do not have the required permissions to view the files attached to this post.
_________________ 2014 PRODIGY 1754 (#19) 2014 5500 BAMF HDR RETRO SOLD
2010 Gator Tail Gator Series 18x54 pushed by a 2020 40GTRXD
|
Sat Mar 07, 2015 7:15 am |
|
 |
msm8281
MMT Elite Member
Joined: Fri Oct 09, 2009 1:50 pm Posts: 9673 Location: New Iberia, La.
|
 Re: bilge discharge on a hunt deck
Out the side. Make sure to get the 90 degree fitting!!
|
Sat Mar 07, 2015 8:13 am |
|
 |
dwight37
MMT Pro Member
Joined: Sat Sep 03, 2011 8:31 pm Posts: 375
|
 Re: bilge discharge on a hunt deck
Alright a 90 deg fitting is the ticket Thanks guys
|
Sat Mar 07, 2015 2:32 pm |
|
 |
gfowel
MMT 1000 Club
Joined: Thu Mar 01, 2012 4:52 pm Posts: 1024 Location: Florida
|
 Re: bilge discharge on a hunt deck
Here's mine.
You do not have the required permissions to view the files attached to this post.
|
Sun Mar 08, 2015 4:23 am |
|
 |
msm8281
MMT Elite Member
Joined: Fri Oct 09, 2009 1:50 pm Posts: 9673 Location: New Iberia, La.
|
 Re: bilge discharge on a hunt deck
^^^^What battery is that?
|
Sun Mar 08, 2015 6:50 am |
|
 |
WestEndAngler
MMT Moderator
Joined: Thu Mar 05, 2009 9:11 am Posts: 9143 Location: Houston | Surfside
|
 Re: bilge discharge on a hunt deck
Mine goes right out onto the hunt deck and off the back of the boat. No issues at all.
_________________ GTB 1860 w/ 2019 GTR40XD-HO
|
Sun Mar 08, 2015 7:47 am |
|
 |
Maclavin
MMT Pro Member
Joined: Thu Jun 06, 2013 4:34 pm Posts: 76 Location: Brooksville. Florida
|
 Re: bilge discharge on a hunt deck
Twin automatic 1100's
You do not have the required permissions to view the files attached to this post.
|
Sun Mar 08, 2015 8:30 am |
|
 |
GatorDubea
MMT Pro Member
Joined: Fri Jun 07, 2013 12:56 pm Posts: 491 Location: Alexandria, La
|
 Re: bilge discharge on a hunt deck
_________________ 07 16x50 w/ 07 35 gtr
|
Sun Mar 08, 2015 8:39 am |
|
 |
gfowel
MMT 1000 Club
Joined: Thu Mar 01, 2012 4:52 pm Posts: 1024 Location: Florida
|
 Re: bilge discharge on a hunt deck
|
Mon Mar 09, 2015 6:32 am |
|
 |
petrel
MMT F.E.
Joined: Mon Jan 11, 2010 9:51 am Posts: 770 Location: NVA
|
 Re: bilge discharge on a hunt deck
I don't have a hunt deck, but my bilge pumps just discharge over the transom. It saved drilling holes in the hull, eliminated the need for angled fittings that can reduce flow, and I didn't have to make room for riser loops to prevent back flow.
_________________ Phowler 2066 w/ E5 37 ProDrive w/ Illowa Marine Heads MoMarsh Fatboy/2 Honda
|
Mon Mar 09, 2015 7:38 am |
|
 |
|