| It is currently Sun Jun 08, 2025 8:51 am |
|
Page 1 of 1 |
[ 18 posts ] |
| Print view | Previous topic | Next topic |
1648 what motor set up?
| Author | Message |
|---|---|
|
MMT Member
Joined: Tue Aug 16, 2016 6:55 am Posts: 14 
|
 1648 what motor set up?Hey guys I have a 1648 flat bottom and a 1648 mod v both with 20inch transoms. I have a 25hp motor and I was going to order a sd frame kit from MB. With that being said do I get the 27" or 32" drive? Also what would be a better hull to put it on? The flat or mod v? I'm new to the mm game so don't give me too much crap ha!
|
| Sun Sep 04, 2016 7:20 pm |
|
|
|
|
MMT 1000 Club  Joined: Thu Jan 31, 2013 5:42 pm Posts: 1913 Location: Conroe tx
|
Re: 1648 what motor set up? Flat bottom , tall transom frame , I'd go. 32" Short answer .
H Finn _________________ Ole black water keep on rolling 18x54 Uncle J -GTR - with the koolaid Back H2o SWOMP 23 SS stage 2 15x36 GD Duck Skiff GATOR GATOR GLIDE PROSTAFF BACKWATER PROSTAFF http://www.gatorglide.com Coupe rest in peace brother |
| Sun Sep 04, 2016 7:48 pm |
|
|
|
|
MMT Pro Member
Joined: Tue May 24, 2016 2:14 pm Posts: 108 Location: Pensacola, FL
|
Re: 1648 what motor set up? _________________ 15/42 Alweld 25 MBLT |
| Sun Sep 04, 2016 8:52 pm |
|
|
|
|
MMT Member
Joined: Thu Dec 24, 2009 2:54 pm Posts: 16 Location: Palmer, Alaska
|
Re: 1648 what motor set up? Is MB selling frame kits? The last time I checked with them the answer was no. That was a while back though.
|
| Sun Sep 04, 2016 9:41 pm |
|
|
|
|
MMT Addict
Joined: Sun Aug 09, 2009 12:50 pm Posts: 574 Location: Muscatine, Iowa
|
Re: 1648 what motor set up? Heres a 1648 20" transom flat bottom, with a moded MB BD 45 pushing it. Runs pretty good, and hauls 5 people really well.
You do not have the required permissions to view the files attached to this post. |
| Mon Sep 05, 2016 7:04 am |
|
|
|
|
MMT Member
Joined: Tue Aug 16, 2016 6:55 am Posts: 14
|
Re: 1648 what motor set up? |
| Mon Sep 05, 2016 8:49 am |
|
|
|
|
MMT 1000 Club
Joined: Sun Sep 01, 2013 2:53 pm Posts: 3480 Location: Hardin County, Tx
|
Re: 1648 what motor set up? That is posted everywhere on this site, but in short, the V bottom delivers turbulent water (or at least not flat) to the prop. These things by nature really need flat, smooth water to the prop to provide good thrust since half of it is out of the water.
_________________ #CFFITR -Custom pool noodle -stage 4 water wings |
| Mon Sep 05, 2016 9:15 am |
|
|
|
|
MMT Super Elite Member
Joined: Fri Dec 18, 2009 8:10 pm Posts: 16915 Location: Rowlett, TX
|
Re: 1648 what motor set up? Less planing surface
|
| Mon Sep 05, 2016 10:06 am |
|
|
|
|
MMT Pro Member
Joined: Tue May 24, 2016 2:14 pm Posts: 108 Location: Pensacola, FL
|
1648 what motor set up? Hate to be "that guy" on this thread but what kind of load are you carrying? and what conditions are you running in? You may find out that that 25 sd might not be what your expecting speed and load carrying wise with that size of boat. Had a buddy that started with a 1648 with a 25 gtr, let's just say he's running a 45 mag now. Just my .02
Sent using smoke signals _________________ 15/42 Alweld 25 MBLT |
| Mon Sep 05, 2016 11:40 am |
|
|
|
|
MMT Member
Joined: Tue Aug 16, 2016 6:55 am Posts: 14
|
Re: 1648 what motor set up? |
| Mon Sep 05, 2016 1:19 pm |
|
|
|
|
MMT Pro Member
Joined: Tue May 24, 2016 2:14 pm Posts: 108 Location: Pensacola, FL
|
Re: 1648 what motor set up? I'd put the 25 on that 1546 and roll with it. Should be a good little setup especially if you're planning on dumping it next year.
Sent using smoke signals _________________ 15/42 Alweld 25 MBLT |
| Mon Sep 05, 2016 4:15 pm |
|
|
|
|
MMT 1000 Club
Joined: Thu Dec 29, 2011 10:46 pm Posts: 2342 Location: Mandeville, LA
|
Re: 1648 what motor set up? You'd be SO Much better off finding an old beat up 35 whatever for about $3k. Throw it on the 1648 and go hunt.
Sent from my SAMSUNG-SGH-I537 using Tapatalk |
| Mon Sep 05, 2016 4:55 pm |
|
|
|
|
MMT Member
Joined: Tue Aug 16, 2016 6:55 am Posts: 14
|
Re: 1648 what motor set up? Sounds like I'll use the 1546 with the 25 for now.
|
| Mon Sep 05, 2016 5:46 pm |
|
|
|
|
MMT Member
Joined: Tue Aug 16, 2016 6:55 am Posts: 14
|
Re: 1648 what motor set up? Should I do a sport frame or a hd frame? Im going to use the 15/46 with the 20" transom
|
| Tue Sep 06, 2016 10:45 am |
|
|
|
|
MMT 1000 Club
Joined: Sun Sep 01, 2013 2:53 pm Posts: 3480 Location: Hardin County, Tx
|
Re: 1648 what motor set up? Probably doesn't matter, sounds like you'll do about the opposite of what everyone recommends anyway. Lol
_________________ #CFFITR -Custom pool noodle -stage 4 water wings |
| Tue Sep 06, 2016 10:57 am |
|
|
|
|
MMT Member
Joined: Tue Aug 16, 2016 6:55 am Posts: 14
|
Re: 1648 what motor set up? |
| Tue Sep 06, 2016 11:15 am |
|
|
|
|
MMT 1000 Club
Joined: Sun Sep 01, 2013 2:53 pm Posts: 3480 Location: Hardin County, Tx
|
Re: 1648 what motor set up? Just giving you shit dude. Everyone recommended the 35, and you're going with the 25. It'll be serviceable and get you thru for a season or two. You'll be alright. Good luck on the wedding.
_________________ #CFFITR -Custom pool noodle -stage 4 water wings |
| Tue Sep 06, 2016 11:23 am |
|
|
|
|
MMT Pro Member
Joined: Tue May 24, 2016 2:14 pm Posts: 108 Location: Pensacola, FL
|
Re: 1648 what motor set up? Just out of curiosity what are they going to charge you for just the frame for that 25?
Sent using smoke signals _________________ 15/42 Alweld 25 MBLT |
| Tue Sep 20, 2016 9:50 pm |
|
|
|
|
|
Page 1 of 1 |
[ 18 posts ] |
|
All times are UTC - 6 hours |
Who is online |
Users browsing this forum: No registered users and 504 guests |
| You cannot post new topics in this forum You cannot reply to topics in this forum You cannot edit your posts in this forum You cannot delete your posts in this forum You cannot post attachments in this forum |