It is currently Mon Jul 07, 2025 7:33 am




Reply to topic  [ 14 posts ] 
 Short transom gatortail 
Author Message
MMT Addict
User avatar

Joined: Sat Sep 10, 2011 11:13 am
Posts: 739
Post Short transom gatortail
Could someone post a picture of a gatortail trimmed all the way down, so i can compare

_________________
1650 ribbed abused by a Gt-35 and push pole reverse


Sat Nov 24, 2012 8:30 pm
Profile
MMT Sponsor

Joined: Fri Jul 24, 2009 7:26 am
Posts: 10388
Location: S-Ville, LA
Post Re: Short transom gatortail
What ya need to know. If your not trimming deep enough, make sure you are on bottom pin


Sat Nov 24, 2012 8:50 pm
Profile
MMT Addict
User avatar

Joined: Sat Sep 10, 2011 11:13 am
Posts: 739
Post Re: Short transom gatortail
You got it, its on bottom pin, belt housing is about two inches from bottom but i can do shit in shallow water. Big blade prop 12" measured. I feel like im not getting to dig down deep enough bc i spray muddy water everywhere!

_________________
1650 ribbed abused by a Gt-35 and push pole reverse


Sat Nov 24, 2012 9:07 pm
Profile
MMT Sponsor

Joined: Fri Jul 24, 2009 7:26 am
Posts: 10388
Location: S-Ville, LA
Post Re: Short transom gatortail
You post a photo of your motor. A couple different angles


Sun Nov 25, 2012 5:45 am
Profile
MMT 1000 Club
User avatar

Joined: Tue Jun 29, 2010 8:32 pm
Posts: 1801
Location: atlanta texas
Post Re: Short transom gatortail
Whats your transom angle?

_________________
1854 DeadFowl custom boat 35 GTR
"The bitterness of poor quality remains long after the sweetness of low price is forgotten."


Sun Nov 25, 2012 8:05 am
Profile
MMT Addict
User avatar

Joined: Wed Oct 27, 2010 6:08 pm
Posts: 663
Location: setx
Post Re: Short transom gatortail
I'm at work but can when I get home. But short/tall transom should be the same at the bottom of the boat.

_________________
23gtr crossover Mikuni


Sun Nov 25, 2012 8:30 am
Profile
MMT Sponsor

Joined: Fri Jul 24, 2009 7:26 am
Posts: 10388
Location: S-Ville, LA
Post Re: Short transom gatortail
Beings his signature says Ribbed Boat, I can pretty much guarantee that it is a 16 degree transom. Not enough angle.

You need to shim outside top out about 1/4" or so. Then ya problem will be resolved.


Sun Nov 25, 2012 9:41 am
Profile
MMT Addict
User avatar

Joined: Fri Sep 11, 2009 6:48 pm
Posts: 701
Location: Houma, LA
Post Re: Short transom gatortail
When I had my ribbed boat I ran my GTR with the pin in the bottom hole. I was able to trim up to just the right height for the prop to be 1/2 out and down enough to dig out in the shallows.

I hope this helps.


Sun Nov 25, 2012 11:15 am
Profile
MMT Sponsor

Joined: Fri Jul 24, 2009 7:26 am
Posts: 10388
Location: S-Ville, LA
Post Re: Short transom gatortail
It doesn't help


Sun Nov 25, 2012 12:20 pm
Profile
MMT Elite Member
User avatar

Joined: Tue Jan 13, 2009 6:08 pm
Posts: 5282
Location: Meraux,La.
Post Re: Short transom gatortail


Sun Nov 25, 2012 12:51 pm
Profile
MMT Elite Member
User avatar

Joined: Tue Jan 13, 2009 7:53 pm
Posts: 7515
Location: Chauvin
Post Re: Short transom gatortail

_________________
1750 GatorTail Extreme/Stage 3 37 GTR HD
Procrastination is a lot like masturbation. Sure it sounds great at the time but, in the end your only f--k--g yourself.


Sun Nov 25, 2012 12:55 pm
Profile
MMT Addict
User avatar

Joined: Wed Oct 27, 2010 6:08 pm
Posts: 663
Location: setx
Post Re: Short transom gatortail
^^ that just a 1x4?

_________________
23gtr crossover Mikuni


Sun Nov 25, 2012 1:16 pm
Profile
MMT Elite Member
User avatar

Joined: Tue Jan 13, 2009 7:53 pm
Posts: 7515
Location: Chauvin
Post Re: Short transom gatortail
1/4" x 2"

_________________
1750 GatorTail Extreme/Stage 3 37 GTR HD
Procrastination is a lot like masturbation. Sure it sounds great at the time but, in the end your only f--k--g yourself.


Sun Nov 25, 2012 1:45 pm
Profile
MMT Addict
User avatar

Joined: Sat Sep 10, 2011 11:13 am
Posts: 739
Post Re: Short transom gatortail
Its an 1650 xpress. When i bought it, it already had shims but they are in the inside ...... gonna change that and see. Also it stays on the bottom hole. Thanks for the replies!

_________________
1650 ribbed abused by a Gt-35 and push pole reverse


Sun Nov 25, 2012 7:30 pm
Profile
Display posts from previous:  Sort by  
Reply to topic   [ 14 posts ] 

Who is online

Users browsing this forum: No registered users and 101 guests


You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

Jump to: