| Author |
Message |
|
Wilson
MMT F.E.
Joined: Thu Jan 15, 2009 6:35 pm
Posts: 935
Location: South LA
|
 Bigger Prodrive Trim Roller Installation I ordered the bigger roller that wraps around my current roller on the bottom of the trim arms. I couldn't get it to roll over the current roller with everything still connected because I didn't have enough space between the roller and tower housing. So I took it all apart and got the bigger roller on the trim arm, but now I can't get the trim arms lined up with the hole in the housing. The two bars at the top are stopping it from going far enough. I think I have the newest version of the larger top yoke that connects to the ram. It has two holes drilled in it facing the ram to allow slightly higher trim. I don't know what else I could need.
Does anyone know how this is supposed to work? It just doesn't seem like it will fit without bending or removing the two bars that protect the engine from the trim arm.
|
| Sun Jul 29, 2012 5:48 pm |
|
|
|
50fps
MMT 1000 Club
Joined: Tue Jan 13, 2009 6:42 pm
Posts: 2377
Location: West Coast Wisconsin
|
Re: Bigger Prodrive Trim Roller Installation Sounds as if your at the limit of the trim. If you need more your going to have to shim at the transom.
|
| Tue Jul 31, 2012 7:31 am |
|
|
|
mizzippi jb
MMT Elite Member
Joined: Wed Sep 21, 2011 2:53 pm
Posts: 5077
Location: The duck Mecca called Ga!
|
Re: Bigger Prodrive Trim Roller Installation pm med. He just installed one.
_________________
HOTSAUCE170 wrote:
I've never gone to Seminole for the amenities/luxury the two reasons I go down there are to kill shit and get fucked up with like minded individuals aka OG'S. If you want to swirl wine and stay in a room where politics and investment diversity are discussed (with no roaches) lake lanier is near Atlanta. If you wanna have an awesome time and maybe stay in a room where children were conceived on one side and someone got stabbed over an 8-ball on the other come on down I got a can of raid. 
|
| Tue Jul 31, 2012 6:44 pm |
|
|
|
Podcast
MMT 1000 Club
Joined: Fri Dec 09, 2011 12:33 pm
Posts: 1363
Location: Friggin cold up here
|
Re: Bigger Prodrive Trim Roller Installation I never had that prob. Mine came n 2 pieces. Put them around the roller and put straps in the grooves.
_________________
Wildberry "Between You, Will, DUCK HEARSE, and PODCAST I have trouble reading anything on here"
23GTR stage 2 by Calen pushin a 1746 Kliebert
|
| Tue Jul 31, 2012 7:42 pm |
|
|
|
med
MMT Elite Member
Joined: Wed Jan 14, 2009 8:25 am
Posts: 6432
Location: the dark side of the moon
|
Re: Bigger Prodrive Trim Roller Installation
_________________
1850 & 36pd
|
| Tue Jul 31, 2012 9:29 pm |
|
|
|
Fuquabw2016
MMT Pro Member
Joined: Wed Aug 03, 2016 9:03 pm
Posts: 189
|
Re: Bigger Prodrive Trim Roller Installation Anyone know if one of those peices that make your trim roller bigger still work on one with the hydro trim ? My boat transom is little to steep
|
| Sat Aug 27, 2016 11:25 am |
|
|
|
Wilson
MMT F.E.
Joined: Thu Jan 15, 2009 6:35 pm
Posts: 935
Location: South LA
|
Re: Bigger Prodrive Trim Roller Installation Mine didn't work with the hydro
|
| Sat Aug 27, 2016 11:47 am |
|
|
|
banded-mallard
MMT 1000 Club
Joined: Wed Oct 07, 2009 8:18 pm
Posts: 4310
|
Re: Bigger Prodrive Trim Roller Installation post a pic of what your talking about. I had to make some changes to my hydro trim and may have done what your talking about.
|
| Thu Sep 01, 2016 4:47 am |
|
|
|
Fuquabw2016
MMT Pro Member
Joined: Wed Aug 03, 2016 9:03 pm
Posts: 189
|
Re: Bigger Prodrive Trim Roller Installation Anyone know what angle transom is supposed to be for a Prodrive to run correctly ?
|
| Thu Sep 01, 2016 10:46 am |
|
|
|
mizzippi jb
MMT Elite Member
Joined: Wed Sep 21, 2011 2:53 pm
Posts: 5077
Location: The duck Mecca called Ga!
|
Re: Bigger Prodrive Trim Roller Installation I think it's either 15 or 16 degrees.
Sent from my SM-G900V using Tapatalk
_________________
HOTSAUCE170 wrote:
I've never gone to Seminole for the amenities/luxury the two reasons I go down there are to kill shit and get fucked up with like minded individuals aka OG'S. If you want to swirl wine and stay in a room where politics and investment diversity are discussed (with no roaches) lake lanier is near Atlanta. If you wanna have an awesome time and maybe stay in a room where children were conceived on one side and someone got stabbed over an 8-ball on the other come on down I got a can of raid.
|
| Fri Sep 02, 2016 6:12 am |
|
|
|
Podcast
MMT 1000 Club
Joined: Fri Dec 09, 2011 12:33 pm
Posts: 1363
Location: Friggin cold up here
|
Re: Bigger Prodrive Trim Roller Installation
_________________
Wildberry "Between You, Will, DUCK HEARSE, and PODCAST I have trouble reading anything on here"
23GTR stage 2 by Calen pushin a 1746 Kliebert
|
| Fri Sep 23, 2016 9:31 pm |
|
|
|
brycecheramie
MMT 1000 Club
Joined: Thu Nov 04, 2010 7:38 am
Posts: 4323
Location: Cut Off, La.
|
Re: Bigger Prodrive Trim Roller Installation
_________________
Refurbishing a Prodrive
|
| Sat Sep 24, 2016 5:47 am |
|
|
|
