| Author |
Message |
|
Nathan
MMT Pro Member
Joined: Thu Jun 10, 2010 8:59 pm
Posts: 98
Location: South Florida
|
 What ya'll think? It's my day off and pouring down rain so I needed something to keep me occupied. Here's a basic layout sketch for my boat. I drew another version with a pointed bow, but the point takes up deck space and this boat won't see much use in timber. I'm open to any suggestions and feedback.
Nathan
_________________
1656 Go-Devil with a Mud Buddy 27 Mini.
|
| Wed Aug 04, 2010 1:21 pm |
|
|
|
UNCLE-J
MMT Sponsor
Joined: Fri Jul 24, 2009 7:26 am
Posts: 10388
Location: S-Ville, LA
|
Re: What ya'll think?
|
| Wed Aug 04, 2010 1:27 pm |
|
|
|
dozrya
MMT 1000 Club
Joined: Wed Apr 07, 2010 8:05 am
Posts: 1228
Location: Houma, LA
|
Re: What ya'll think? Hey Jason fuck you!!
I took visualization to a new level. See this guy drew this out on a piece of paper. If he puts the paper on the ground, and stands on it, his foot does not fit in the boat. I used chalk, stood INSIDE my boat and go to see the room I would have.
I rather have fun and use Crayola products.....plus I don't have time to sit down with a ruler and draw shit
_________________
1754 Xtreme 35 GTR Stage 1
|
| Wed Aug 04, 2010 8:20 pm |
|
|
|
naj
MMT 1000 Club
Joined: Fri Jan 22, 2010 8:40 pm
Posts: 1620
Location: Larose, Louisiana
|
Re: What ya'll think? Make it 18 feet long with 21 inch sides.
_________________
18' X 48" Center Console Sportsman Fab with a Yamaha F70LA
18' X 48" Center Console Sportsman Fab Dragging a 36hp ProDrive
15' X 42" Sea Arch with a 27hp ProDrive
|
| Wed Aug 04, 2010 8:38 pm |
|
|
|
Nathan
MMT Pro Member
Joined: Thu Jun 10, 2010 8:59 pm
Posts: 98
Location: South Florida
|
Re: What ya'll think? Don't want to go any longer. Going to be running a MB 27 Mini Lite on this hull. I did consider going a little higher on the side height, but this will be a protected water boat. Not many waves in the everglades and want to keep weight down.
Nathan
_________________
1656 Go-Devil with a Mud Buddy 27 Mini.
|
| Thu Aug 05, 2010 1:59 am |
|
|
|
jordy
MMT 1000 Club
Joined: Thu Mar 11, 2010 8:25 pm
Posts: 1588
Location: South Louisiana
|
Re: What ya'll think? yea i would def go with the 21" sides........................
-jordy
|
| Fri Aug 06, 2010 3:16 pm |
|
|
|
Nathan
MMT Pro Member
Joined: Thu Jun 10, 2010 8:59 pm
Posts: 98
Location: South Florida
|
Re: What ya'll think? Made a few changes. 14" hunt deck, 20" sides, 4' deck. What size is the drivers box on ya'lls rigs? Also going to lower the hunt deck. My goal is to have it about 2" above the water when the boat is at rest. What size is the trolling motor pad on the front deck?
Thanks,
Nathan
_________________
1656 Go-Devil with a Mud Buddy 27 Mini.
|
| Mon Aug 09, 2010 8:20 am |
|
|
|
UNCLE-J
MMT Sponsor
Joined: Fri Jul 24, 2009 7:26 am
Posts: 10388
Location: S-Ville, LA
|
Re: What ya'll think?
|
| Mon Aug 09, 2010 8:37 am |
|
|
|
Nathan
MMT Pro Member
Joined: Thu Jun 10, 2010 8:59 pm
Posts: 98
Location: South Florida
|
Re: What ya'll think? I thought about using the sidewalk chalk idea also. It gives you a full scale example to look at. Problem is I have a brick driveway. Doesn't make a very smooth surface for sidewalk chalk.
Nathan
_________________
1656 Go-Devil with a Mud Buddy 27 Mini.
|
| Mon Aug 09, 2010 8:39 am |
|
|
|
dguidry
MMT Super Elite Member
Joined: Tue Jun 29, 2010 1:20 pm
Posts: 11166
Location: Cecilia, LA
|
Re: What ya'll think? I'd make it 18' long, and if not 4.5' wide. You'll be glad you did.
_________________
Formerly:1648 Homemade Cypress Crawfish Skiff GTR23 Performance Cam and Heads; 17x46 Gator Tail with 35GTR and Hoyt's cam;s Currently: 17x48 Gator Tail with XD40 EFI.
“Wisdom is not just expertise. It is knowing how much of various areas of expertise you need to know in order to make the decisions that the world needs and that you want to do,” Columbia University President Lee Bollinger.
|
| Mon Aug 09, 2010 9:03 am |
|
|
|
UNCLE-J
MMT Sponsor
Joined: Fri Jul 24, 2009 7:26 am
Posts: 10388
Location: S-Ville, LA
|
Re: What ya'll think?
|
| Mon Aug 09, 2010 9:50 am |
|
|
|
