Author |
Message |
Crews
MMT 1000 Club
Joined: Wed Jan 14, 2009 9:07 pm Posts: 2260 Location: Lafayette
|
 Aluminum Primer
wat works best?
_________________ 24x60 Dual Prodrives
|
Wed May 13, 2009 1:08 pm |
|
 |
quackconsumer
MMT Elite Member
Joined: Wed Jan 14, 2009 7:54 pm Posts: 5582
|
 Re: Aluminum Primer
Acid wash first ( you can use allumabrite for this ). Then use a self etching primer, then apply your paint.
|
Wed May 13, 2009 1:19 pm |
|
 |
The Shafer
MMT 1000 Club
Joined: Tue Jan 13, 2009 7:46 pm Posts: 1947 Location: Longview. TX
|
 Re: Aluminum Primer
dont forget to get me some too crews!!! 
_________________ WC 1848 Bateau w/ 36 PD FPR
|
Wed May 13, 2009 1:53 pm |
|
 |
Hunter27
MMT Member
Joined: Sun Apr 19, 2009 8:02 pm Posts: 7
|
 Re: Aluminum Primer
I used the spray can self-etching primer from AutoZone after acid wash. I was pleased with the results.
|
Wed May 13, 2009 4:43 pm |
|
 |
muddoctor
MMT Sponsor
Joined: Thu Jan 22, 2009 8:38 am Posts: 649
|
 Re: Aluminum Primer
_________________ Paul V. Willging - Owner Phowler Boat Company Illowa Marine
1701 Main Avenue, Clinton, Iowa 52732 563-242-8969 or cell 563-212-7091 email: larrys-prodrive@mchsi.com
http://www.larrysillowamarine.com
|
Wed May 13, 2009 7:55 pm |
|
 |
River
MMT 1000 Club
Joined: Wed Jan 14, 2009 8:34 am Posts: 1092 Location: Unaffiliated, SETX group has caused me to renounce my Texas Citizenship
|
 Re: Aluminum Primer
_________________ "Democracy is two wolves and a lamb voting on what to have for lunch. Liberty is a well-armed lamb contesting the outcome of the vote."-Benjamin Franklin
|
Wed May 13, 2009 8:17 pm |
|
 |
BROOKS
MMT 1000 Club
Joined: Tue Jan 13, 2009 9:46 pm Posts: 4596 Location: East TEXAN Proud
|
 Re: Aluminum Primer
Come on Dawgs ~ Can we git a least two pages out of this !!!!! 
_________________ Git a Gator-Tail or ride in mines wake ...... MtrFact !!!!! '05 Model .... Still Number One on the Water !!!!
|
Wed May 13, 2009 8:21 pm |
|
 |
Crews
MMT 1000 Club
Joined: Wed Jan 14, 2009 9:07 pm Posts: 2260 Location: Lafayette
|
 Re: Aluminum Primer
_________________ 24x60 Dual Prodrives
|
Thu May 14, 2009 12:27 pm |
|
 |
Crews
MMT 1000 Club
Joined: Wed Jan 14, 2009 9:07 pm Posts: 2260 Location: Lafayette
|
 Re: Aluminum Primer
on edit..... nevermind. I've done nothing by besting a fool. 
_________________ 24x60 Dual Prodrives
|
Thu May 14, 2009 12:30 pm |
|
 |
Mitschke
MMT F.E.
Joined: Tue Jan 13, 2009 7:18 pm Posts: 971
|
 Re: Aluminum Primer
Crews when is your new boat gunna be done???
I have used some of that self etching primer in a can and it has done well. Even without alumabrite or sanding. I know we use a self etching primer on gas separators at work and it comes in gallons. Ill look in da paint booth tomorrow and see if i can find out where to get it.
When i painted my boat, i couldnt find any self etching in gallons.
|
Thu May 14, 2009 10:00 pm |
|
 |
POKER1
MMT Elite Member
Joined: Tue Jan 13, 2009 8:02 pm Posts: 6243 Location: Bossier City
|
 Re: Aluminum Primer
_________________ 18x48 Charles Leonard / 36PD
"I do think there is a Squatch in these woods"!!!!!
|
Thu May 14, 2009 11:36 pm |
|
 |
willett
MMT Sponsor
Joined: Wed Jan 14, 2009 10:22 am Posts: 1764 Location: Tyler, TX
|
 Re: Aluminum Primer
As hard as you are on boats just get it powdercoated that's what Andy did with all the boats he built
_________________ Pete Willett WC Custom Boats - Tyler, TX http://www.wccustomboats.com
WC Custom 2048 3/16 Bottom Center Console with 35 PD EFI GTR WC Custom 1840 Hybrid 3/16 Bottom with 37 EFI BOSS
|
Fri May 15, 2009 7:54 am |
|
 |
swampmonkey
MMT Pro Member
Joined: Wed Jan 14, 2009 9:26 am Posts: 142
|
 Re: Aluminum Primer
somewhat off the subject, but the main spots where my paint don't stay on is on the edges - of the elevated walk through/split seat center bench & the front deck (running a go devil hull). where to you buy that black sticky/abrasive/no-slip tape - maybe 2 or 4 inches wide? i was thinking of trying that crap. does it stay on for at least one season. does the mart have it? thanks
_________________ Gator Tail GTR35 on a Go Devil 16x56
|
Fri May 15, 2009 8:17 am |
|
 |
The Shafer
MMT 1000 Club
Joined: Tue Jan 13, 2009 7:46 pm Posts: 1947 Location: Longview. TX
|
 Re: Aluminum Primer
_________________ WC 1848 Bateau w/ 36 PD FPR
|
Fri May 15, 2009 9:03 am |
|
 |
POKER1
MMT Elite Member
Joined: Tue Jan 13, 2009 8:02 pm Posts: 6243 Location: Bossier City
|
 Re: Aluminum Primer
_________________ 18x48 Charles Leonard / 36PD
"I do think there is a Squatch in these woods"!!!!!
|
Fri May 15, 2009 11:07 am |
|
 |
swampmonkey
MMT Pro Member
Joined: Wed Jan 14, 2009 9:26 am Posts: 142
|
 Re: Aluminum Primer
_________________ Gator Tail GTR35 on a Go Devil 16x56
|
Fri May 15, 2009 11:47 am |
|
 |
The Shafer
MMT 1000 Club
Joined: Tue Jan 13, 2009 7:46 pm Posts: 1947 Location: Longview. TX
|
 Re: Aluminum Primer
Just buy the B stock hydroturf off of their website. I got 4 sheets at 30 bucks a sheet and cant find a thing wrong with any of them...I promise...spend the cash and stand back and admire the beauty...
_________________ WC 1848 Bateau w/ 36 PD FPR
|
Fri May 15, 2009 12:20 pm |
|
 |
muddoctor
MMT Sponsor
Joined: Thu Jan 22, 2009 8:38 am Posts: 649
|
 Re: Aluminum Primer
_________________ Paul V. Willging - Owner Phowler Boat Company Illowa Marine
1701 Main Avenue, Clinton, Iowa 52732 563-242-8969 or cell 563-212-7091 email: larrys-prodrive@mchsi.com
http://www.larrysillowamarine.com
|
Fri May 15, 2009 12:21 pm |
|
 |
Crews
MMT 1000 Club
Joined: Wed Jan 14, 2009 9:07 pm Posts: 2260 Location: Lafayette
|
 Re: Aluminum Primer
never tried to help Willy fix his setup... why waste my time on a lost cause?  Hey... just for the record, I'm glad we have atleast one manufacturer/sponsor on here that isn't afraid to make an ass of himself. I mean all of the other boat manufacturers that read this forum are classy enough to keep their mouths shut and not make fools of themselves. I guess they don't need to since they really don't have anything to prove. You, on the other hand...... well that's a different story. 
_________________ 24x60 Dual Prodrives
|
Fri May 15, 2009 1:01 pm |
|
 |
muddoctor
MMT Sponsor
Joined: Thu Jan 22, 2009 8:38 am Posts: 649
|
 Re: Aluminum Primer
_________________ Paul V. Willging - Owner Phowler Boat Company Illowa Marine
1701 Main Avenue, Clinton, Iowa 52732 563-242-8969 or cell 563-212-7091 email: larrys-prodrive@mchsi.com
http://www.larrysillowamarine.com
|
Fri May 15, 2009 2:31 pm |
|
 |
Crews
MMT 1000 Club
Joined: Wed Jan 14, 2009 9:07 pm Posts: 2260 Location: Lafayette
|
 Re: Aluminum Primer
Ignorance is bliss PWilly. You may not think you have anything to prove, but if you had any idea how crappy and ugly your boat designs were your yankee ass would be really hustling to play catch up. oh... and thanks for the paint advice. 
_________________ 24x60 Dual Prodrives
|
Fri May 15, 2009 2:55 pm |
|
 |
|