It is currently Tue May 06, 2025 5:52 am




Reply to topic  [ 12 posts ] 
 new boat performance1856 phowler with 36 pd 
Author Message
MMT Pro Member

Joined: Fri May 27, 2011 2:40 am
Posts: 272
Post new boat performance1856 phowler with 36 pd
well finally got out to run my new boat 1856 phowler with 36 pd. this is my first sd and i'm still learning how to drive it. everything seemed to work great. running wide open i was running about 3700-3800 rpm trimmed with about half the prop in the water played around with the trim quite a bit and this seemed like the sweet spot. does this sound about right for the rpm range??? will get some gps speeds and pics when i take my brother out with me. this is a stock pd for now until i learn how to drive it. only problem i had was trying to load it on the trailer in current. found out you really have to stay on the throttle with a slick bottom boat like this or it don't steer for s**t.

_________________
1856 Phowler commercial hull with extra flotation so I can run shallower. Pushed by a stock Prodrive until my wife gives me more money


Sun Mar 11, 2012 11:42 pm
Profile
MMT Pro Member

Joined: Thu Oct 28, 2010 6:21 am
Posts: 178
Post Re: new boat performance
congrats on the new boat


Mon Mar 12, 2012 5:49 am
Profile
MMT 1000 Club
User avatar

Joined: Fri Jun 25, 2010 3:33 pm
Posts: 1177
Location: WI
Post Re: new boat performance
Sounds right for a stock motor on that boat.

_________________
1848 DeadFowl pushed by a Stage 4 Delta powered MB HDR (JBP dusting)


Mon Mar 12, 2012 7:43 am
Profile
MMT 1000 Club

Joined: Fri Dec 09, 2011 12:33 pm
Posts: 1363
Location: Friggin cold up here
Post new boat performance

_________________
Wildberry "Between You, Will, DUCK HEARSE, and PODCAST I have trouble reading anything on here"
23GTR stage 2 by Calen pushin a 1746 Kliebert


Mon Mar 12, 2012 8:25 am
Profile
MMT Addict

Joined: Sun Jun 05, 2011 9:19 pm
Posts: 721
Location: carrollton MS
Post Re: new boat performance
the rpm's sound a bit low to me, and that boat will carry one hell of a load.
p.s. when you decide to do mods a stage 1(heads,cam,ehaust)is a good choice,it produces good power and is reliable

_________________
8 foot sneak boat with 8hp go devil going Mach 1
Layout blinds and a whole bunch of decoys


Mon Mar 12, 2012 9:36 am
Profile
MMT Elite Member
User avatar

Joined: Tue Jan 13, 2009 8:02 pm
Posts: 6243
Location: Bossier City
Post Re: new boat performance
What are you RPMs on the trailer? Set them at 4200. They will be different for everyone on the water due to differences in hulls and load at the time.

_________________
18x48 Charles Leonard / 36PD

"I do think there is a Squatch in these woods"!!!!!


Mon Mar 12, 2012 10:44 am
Profile
MMT Pro Member

Joined: Fri May 27, 2011 2:40 am
Posts: 272
Post Re: new boat performance
scatters boy if you say the rpm's are a little low what abouts should it be with this type of hull? more around 4000 rpm? also is there a rev limiter on the 36 pd? thanks to the rest of you guys for your replies.

_________________
1856 Phowler commercial hull with extra flotation so I can run shallower. Pushed by a stock Prodrive until my wife gives me more money


Mon Mar 12, 2012 11:49 pm
Profile
MMT 1000 Club
User avatar

Joined: Fri Jun 25, 2010 3:33 pm
Posts: 1177
Location: WI
Post Re: new boat performance
I have a 1756 phowler extreme. I have a MB 45 blk death on it and it ran 4200-4280 rpm's. Now I did the cam and coils and I can run 4400/4500 with a not so good prop. Thats why with your stock motor you are prob about right I would say.

_________________
1848 DeadFowl pushed by a Stage 4 Delta powered MB HDR (JBP dusting)


Tue Mar 13, 2012 7:45 am
Profile
MMT Elite Member
User avatar

Joined: Thu Jan 13, 2011 7:32 am
Posts: 5210
Location: Beaumont Texas
Post Re: new boat performance
i have a prodrive 1754 (heavy ass boat) and I have a stock 36 pd with a marsh mellow exhaust. On plane at wot and optimum trim I run about 4150 on average. good slick water it will hit 4220 rpm. Make sure you have enough weight in the front to keep nose down. if its riding a little high it will put a little more load on motor.

_________________
You can't see the sunrise if your eyes are closed.
dying aint much of a livin....

Black ops IITX marshstalker


1840 WC www.wccustomboats.com
fuel injected 25 GTR


Tue Mar 13, 2012 8:04 am
Profile
MMT Addict

Joined: Sun Jun 05, 2011 9:19 pm
Posts: 721
Location: carrollton MS
Post Re: new boat performance

_________________
8 foot sneak boat with 8hp go devil going Mach 1
Layout blinds and a whole bunch of decoys


Tue Mar 13, 2012 9:02 am
Profile
MMT Pro Member
User avatar

Joined: Wed Aug 31, 2011 8:32 am
Posts: 277
Location: Mineola, Tx
Post Re: new boat performance
i have a 1654 lakesport w/36 PD bone stock and wot in smooth water i run 3840-3870 is steady max in open water. granted the bottom of my boat is pretty beat up and it is not a slick bottom. constant max speed with me 250 and my son 110 we run 24 mph. open and shallow it hits 25 at times

_________________
Supporting our Troops. United States Navy 13 yrs proud E-6 Petty Officer First Class Aircrew Survivial Equipmenman, Certified Land and Water Survival Instructor MTS, and EMT.
1650 Lake sport 36PD.


Tue Mar 13, 2012 9:08 am
Profile
MMT Addict

Joined: Sun Jun 05, 2011 9:19 pm
Posts: 721
Location: carrollton MS
Post Re: new boat performance

_________________
8 foot sneak boat with 8hp go devil going Mach 1
Layout blinds and a whole bunch of decoys


Tue Mar 13, 2012 9:12 am
Profile
Display posts from previous:  Sort by  
Reply to topic   [ 12 posts ] 

Who is online

Users browsing this forum: No registered users and 70 guests


You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

Jump to: