FAQ • Login
It is currently Thu Jul 24, 2025 2:32 am




Reply to topic  Page 1 of 1
  [ 30 posts ] 
Print view Previous topic | Next topic 
 heads  
Author Message
jakecologne
MMT F.E.
User avatar

Joined: Thu Jun 10, 2010 2:57 pm
Posts: 933
Location: Des Allemands
Post heads
the mechanical inclinement needed to install after market heads is ?

_________________
16x44 Hanko Skiff
35GTR

Mon Oct 22, 2012 8:47 am
Profile
Will
MMT Elite Member

Joined: Fri Jul 08, 2011 1:54 pm
Posts: 8133
Post Re: heads
Knowing how to use a torque wrench... bout it.

_________________
Before the internet, the majority of the village idiots stayed in their villages.

Mon Oct 22, 2012 8:49 am
Profile
craig
MMT Elite Member
User avatar

Joined: Tue Jan 13, 2009 7:53 pm
Posts: 7515
Location: Chauvin
Post Re: heads

_________________
1750 GatorTail Extreme/Stage 3 37 GTR HD
Procrastination is a lot like masturbation. Sure it sounds great at the time but, in the end your only f--k--g yourself.

Mon Oct 22, 2012 8:52 am
Profile
jerimiahw
MMT 1000 Club
User avatar

Joined: Sun Sep 23, 2012 8:10 pm
Posts: 1191
Location: chauvin
Post Re: heads
U have to have completed 2nd grade and built a Lego castle
Mon Oct 22, 2012 8:57 am
Profile
OwenDickeson
MMT Elite Member

Joined: Wed Mar 11, 2009 12:45 pm
Posts: 9869
Post Re: heads
:lol:
Mon Oct 22, 2012 8:58 am
Profile
tchauvin
MMT 1000 Club
User avatar

Joined: Wed Jul 13, 2011 6:23 pm
Posts: 4898
Location: Bourg LA
Post Re: heads
Mon Oct 22, 2012 11:19 am
Profile
tchauvin
MMT 1000 Club
User avatar

Joined: Wed Jul 13, 2011 6:23 pm
Posts: 4898
Location: Bourg LA
Post Re: heads
Mon Oct 22, 2012 11:22 am
Profile
cb5331
MMT Super Elite Member

Joined: Fri Dec 18, 2009 8:10 pm
Posts: 16915
Location: Rowlett, TX
Post Re: heads
Mon Oct 22, 2012 11:24 am
Profile
Will
MMT Elite Member

Joined: Fri Jul 08, 2011 1:54 pm
Posts: 8133
Post Re: heads

_________________
Before the internet, the majority of the village idiots stayed in their villages.

Mon Oct 22, 2012 11:30 am
Profile
sela_native
MMT Addict
User avatar

Joined: Sat Sep 10, 2011 11:13 am
Posts: 739
Post Re: heads
Burn

_________________
1650 ribbed abused by a Gt-35 and push pole reverse

Mon Oct 22, 2012 2:00 pm
Profile
Beadlejuicejr
MMT 1000 Club

Joined: Tue Nov 02, 2010 7:11 pm
Posts: 1435
Location: Bayou vista, Louisiana
Post Re: heads
If you have to ask you probably can't do it

_________________
stage 3 GTR screaming behind the 1848 Garrett Pearce special. GET YOU SOME!

Mon Oct 22, 2012 4:02 pm
Profile
jakecologne
MMT F.E.
User avatar

Joined: Thu Jun 10, 2010 2:57 pm
Posts: 933
Location: Des Allemands
Post Re: heads
sorry I don't work on motors.

_________________
16x44 Hanko Skiff
35GTR

Mon Oct 22, 2012 6:11 pm
Profile
msm8281
MMT Elite Member
User avatar

Joined: Fri Oct 09, 2009 1:50 pm
Posts: 9673
Location: New Iberia, La.
Post Re: heads
Well do it your self, ask questions, and learn.
Mon Oct 22, 2012 6:12 pm
Profile
OwenDickeson
MMT Elite Member

Joined: Wed Mar 11, 2009 12:45 pm
Posts: 9869
Post Re: heads
You'll never learn unless you dive in.
Mon Oct 22, 2012 6:44 pm
Profile
pooldoo73
MMT F.E.
User avatar

Joined: Tue Jan 25, 2011 5:47 pm
Posts: 886
Location: Plaquemine
Post Re: heads
If dguidry can do it, jack can.

_________________
18'x54"CC Hanko/ 36PD

Mon Oct 22, 2012 6:54 pm
Profile
Will
MMT Elite Member

Joined: Fri Jul 08, 2011 1:54 pm
Posts: 8133
Post Re: heads

_________________
Before the internet, the majority of the village idiots stayed in their villages.

Mon Oct 22, 2012 6:55 pm
Profile
txmudcutter
MMT 1000 Club
User avatar

Joined: Mon Jan 30, 2012 9:08 am
Posts: 2307
Location: Nederland, TX (SETX)
Post Re: heads
Mon Oct 22, 2012 7:04 pm
Profile
dguidry
MMT Super Elite Member
User avatar

Joined: Tue Jun 29, 2010 1:20 pm
Posts: 11166
Location: Cecilia, LA
Post Re: heads

_________________
Formerly:1648 Homemade Cypress Crawfish Skiff GTR23 Performance Cam and Heads; 17x46 Gator Tail with 35GTR and Hoyt's cam;s Currently: 17x48 Gator Tail with XD40 EFI.
“Wisdom is not just expertise. It is knowing how much of various areas of expertise you need to know in order to make the decisions that the world needs and that you want to do,” Columbia University President Lee Bollinger.

Mon Oct 22, 2012 7:28 pm
Profile WWW
duckduckboom
MMT Elite Member
User avatar

Joined: Tue Nov 23, 2010 6:33 pm
Posts: 5603
Location: Corner of Hell an high water, La
Post Re: heads
Just put it back together the same way you took it apart


Here is your torque specs
viewtopic.php?f=3&t=13296

_________________
You have your whole life to be an idiot, take a day off!

Mon Oct 22, 2012 7:42 pm
Profile
Beadlejuicejr
MMT 1000 Club

Joined: Tue Nov 02, 2010 7:11 pm
Posts: 1435
Location: Bayou vista, Louisiana
Post Re: heads

_________________
stage 3 GTR screaming behind the 1848 Garrett Pearce special. GET YOU SOME!

Mon Oct 22, 2012 8:16 pm
Profile
duckduckboom
MMT Elite Member
User avatar

Joined: Tue Nov 23, 2010 6:33 pm
Posts: 5603
Location: Corner of Hell an high water, La
Post Re: heads
yeah but it's his dime not mine. i say go for it

_________________
You have your whole life to be an idiot, take a day off!

Mon Oct 22, 2012 8:17 pm
Profile
Beadlejuicejr
MMT 1000 Club

Joined: Tue Nov 02, 2010 7:11 pm
Posts: 1435
Location: Bayou vista, Louisiana
Post Re: heads
Shit go for it I built mine drunk as shit. But I also done mechanic work for a long time and a Briggs is like a Lego car compared to what I've worked. On

_________________
stage 3 GTR screaming behind the 1848 Garrett Pearce special. GET YOU SOME!

Mon Oct 22, 2012 8:24 pm
Profile
dguidry
MMT Super Elite Member
User avatar

Joined: Tue Jun 29, 2010 1:20 pm
Posts: 11166
Location: Cecilia, LA
Post Re: heads
Jack: where are you located. I'll help you put on your heads. My torque specs are tighten till it feels right then knock the head with a ball pin and tighten a bit more alternating opposite bolts.

_________________
Formerly:1648 Homemade Cypress Crawfish Skiff GTR23 Performance Cam and Heads; 17x46 Gator Tail with 35GTR and Hoyt's cam;s Currently: 17x48 Gator Tail with XD40 EFI.
“Wisdom is not just expertise. It is knowing how much of various areas of expertise you need to know in order to make the decisions that the world needs and that you want to do,” Columbia University President Lee Bollinger.

Mon Oct 22, 2012 8:35 pm
Profile WWW
vp1016
MMT Member
User avatar

Joined: Mon Sep 10, 2012 7:54 am
Posts: 27
Location: Houston, TX
Post Re: heads
I have been wondering the same thing. I want to upgrade to BPS heads. The reality is that Briggs isn't a complicated motor but I dont know the first thing about setting valves. Any tips, suggestions, instructions? I know i will never learn if I dont jump into it and do it myself, but it would be nice to get some advice from those of you who have done it before.

_________________
18' Legend Craft - Mudbuddy 35 w/ some extras
CAST & BLAST

Sun Oct 28, 2012 12:55 am
Profile
sela_native
MMT Addict
User avatar

Joined: Sat Sep 10, 2011 11:13 am
Posts: 739
Post Re: heads
Youtube and google, they work wonders together.

_________________
1650 ribbed abused by a Gt-35 and push pole reverse

Sun Oct 28, 2012 11:50 am
Profile
SP
MMT 1000 Club

Joined: Thu Nov 19, 2009 1:46 pm
Posts: 1210
Post Re: heads
Sun Oct 28, 2012 2:54 pm
Profile
vp1016
MMT Member
User avatar

Joined: Mon Sep 10, 2012 7:54 am
Posts: 27
Location: Houston, TX
Post Re: heads

_________________
18' Legend Craft - Mudbuddy 35 w/ some extras
CAST & BLAST

Sun Oct 28, 2012 5:45 pm
Profile
take'emgator
MMT Super Elite Member

Joined: Mon Oct 19, 2009 6:38 pm
Posts: 10201
Location: SETX
Post Re: heads
VP, from a personal stand point, i would get your stock heads done before i went and spent money else where.
Sun Oct 28, 2012 5:55 pm
Profile
vp1016
MMT Member
User avatar

Joined: Mon Sep 10, 2012 7:54 am
Posts: 27
Location: Houston, TX
Post Re: heads

_________________
18' Legend Craft - Mudbuddy 35 w/ some extras
CAST & BLAST

Sun Oct 28, 2012 7:25 pm
Profile
take'emgator
MMT Super Elite Member

Joined: Mon Oct 19, 2009 6:38 pm
Posts: 10201
Location: SETX
Post Re: heads
Feel free to call and talk to me anytime, i'll Pm you my number.
Sun Oct 28, 2012 8:23 pm
Profile
Display posts from previous:  Sort by  
Reply to topic   Page 1 of 1
  [ 30 posts ] 

Board index » MMT Main Forums » Engines & Engine Mod Talk

All times are UTC - 6 hours


Who is online

Users browsing this forum: No registered users and 109 guests

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

Jump to: