|
|
FAQ
• Login
|
|
It is currently Tue May 13, 2025 12:35 am
|
|
Page 1 of 1
|
[ 9 posts ] |
|
| Author |
Message |
|
Wilson
MMT F.E.
Joined: Thu Jan 15, 2009 6:35 pm
Posts: 935
Location: South LA
|
 PD Lower Unit Grease How often do you grease the newer style Prodrive lower units? Specifically the zero right above the cav plate that makes grease come out by the prop.
|
| Wed Jun 05, 2013 6:53 pm |
|
|
|
T-Bubba
MMT 1000 Club
Joined: Wed Feb 18, 2009 6:43 pm
Posts: 3958
Location: Centerville, La
|
Re: PD Lower Unit Grease i grease mine often.. i run alot of lillies that get stuck around the prop and cut the seals
every time i pump grease water comes out... even after the first ride
_________________
I gave up mud motors
|
| Wed Jun 05, 2013 7:38 pm |
|
|
|
K'jun
MMT Member
Joined: Sat Mar 02, 2013 12:40 pm
Posts: 47
Location: Deep South, LA
|
Re: PD Lower Unit Grease This is a stupid question, but do you pump in that grease sert till grease comes out by prop? If not how many shots do you pump in at a time?
|
| Wed Jun 05, 2013 8:17 pm |
|
|
|
T-Bubba
MMT 1000 Club
Joined: Wed Feb 18, 2009 6:43 pm
Posts: 3958
Location: Centerville, La
|
Re: PD Lower Unit Grease i pump it till grease comes out a good bit to flush it
_________________
I gave up mud motors
|
| Wed Jun 05, 2013 9:35 pm |
|
|
|
Will
MMT Elite Member
Joined: Fri Jul 08, 2011 1:54 pm
Posts: 8133
|
Re: PD Lower Unit Grease
_________________
Before the internet, the majority of the village idiots stayed in their villages.
|
| Thu Jun 06, 2013 3:41 am |
|
|
|
K'jun
MMT Member
Joined: Sat Mar 02, 2013 12:40 pm
Posts: 47
Location: Deep South, LA
|
Re: PD Lower Unit Grease So I'm assuming here, theres no seal around the prop shaft that will be blown out if i keep pumping grease till i see it?
|
| Thu Jun 06, 2013 6:26 am |
|
|
|
Will
MMT Elite Member
Joined: Fri Jul 08, 2011 1:54 pm
Posts: 8133
|
Re: PD Lower Unit Grease Correct
_________________
Before the internet, the majority of the village idiots stayed in their villages.
|
| Thu Jun 06, 2013 6:28 am |
|
|
|
pooldoo73
MMT F.E.
Joined: Tue Jan 25, 2011 5:47 pm
Posts: 886
Location: Plaquemine
|
Re: PD Lower Unit Grease There are seals around the prop shaft, but they won't get blown out when u squeeze it.
_________________
18'x54"CC Hanko/ 36PD
|
| Thu Jun 06, 2013 2:01 pm |
|
|
|
bayouboy
MMT Elite Member
Joined: Tue Jan 13, 2009 6:08 pm
Posts: 5376
Location: Venice, La
|
Re: PD Lower Unit Grease I purge mine every 50 hrs or so, by removing the bottom plug on the prop shaft and pump grease until it comes out clean.
|
| Fri Jun 07, 2013 10:17 am |
|
|
|
|
|
Page 1 of 1
|
[ 9 posts ] |
|
Who is online |
Users browsing this forum: No registered users and 97 guests |
|
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum
|
|
