It is currently Tue May 06, 2025 1:33 am




Reply to topic  [ 34 posts ] 
 20x54 
Author Message
MMT Pro Member

Joined: Mon Oct 04, 2010 12:12 pm
Posts: 111
Post 20x54
20X54 boat
35 GTR (stage 2)
3/16" Bottom
1/8" Sides
24" Sides
Catwalks
5 1/2' Front Deck
16" Hunt Deck
Front and back spud holes
Terra 4500lb winch
Square Chine
Shark Eye Navigation Lights
2 bazooka 8 inch speakers
Jenson water proof radio
200 watt amp
Schumacher 3 banks batter charger
2 AGM batteries
Lowrance Elite 7- HDI depth finder and nav.
Led lights under cat walks and in each hatch
Camo Hydro Turf
Gator Glide
Trolling Motor
2- 8 inch HID spot lights

This boat is a barge but that is what I wanted. I have only ran it a couple of times now that everything has been fixed. I was getting 26 mph into white caps yesterday on the lake. I have found the sweet spot and it runs pretty good. The 26 mph was with 3/4 tank of gas a yeti cooler full of water and me driving into the wind. I am ready to get into some smooth shallow water and mud and see how she performs. The Gator Glide is pretty sweet but makes it hard to load and unload your boat by yourself. Once you do it a couple of times its no big deal. I would recommend the Gator Glide to anyone who is thinking about it. I am sorry if the pictures are not up right I don't know how to fix them.


You do not have the required permissions to view the files attached to this post.


Tue Jul 23, 2013 11:07 am
Profile
MMT Pro Member

Joined: Mon Oct 04, 2010 12:12 pm
Posts: 111
Post Re: 20x54 custom
more


You do not have the required permissions to view the files attached to this post.


Tue Jul 23, 2013 11:09 am
Profile
MMT 1000 Club
User avatar

Joined: Wed Jan 14, 2009 8:18 pm
Posts: 4915
Location: Lake Jackson, TX
Post Re: 20x54 custom
Looks good! No interest in hanging two off the back?


27 PD FPR 16x36 skiff

_________________
37 PD EFI FPR 18x48 Tiller
SOLD -- 36 PD EFI FPR 18x48 Stick Steer
SOLD -- 27 PD FPR 16x36 Skiff


Tue Jul 23, 2013 11:17 am
Profile
MMT 1000 Club
User avatar

Joined: Tue Jan 13, 2009 8:02 pm
Posts: 4534
Location: South Louisiana
Post Re: 20x54 custom
You might want to get 2 GatorTails!

_________________
17/54 GT EXTREME Center Console, Huntdeck w/ GTR 35

Hoyt Mods and some other goodies


Tue Jul 23, 2013 11:40 am
Profile
MMT 1000 Club
User avatar

Joined: Sat Jun 25, 2011 8:33 am
Posts: 1352
Location: Genoa AR
Post Re: 20x54 custom
I think Caddoz has a 20x54 with a stage 2 GTR, it seemed to run fine when I saw him at caddo.


Tue Jul 23, 2013 12:02 pm
Profile
MMT Pro Member

Joined: Mon Oct 04, 2010 12:12 pm
Posts: 111
Post Re: 20x54 custom
I did think about putting two motors but I did not want the extra weight in the back with the hard bottoms I run. It is going to have a stage 2. I was only going to go with the 18 foot boat but ran a another boat the same size with a stage 2 and it ran just fine. I have read many different reviews and did my research and can not see why everyone says it will not have enough motor. From my understanding there is not much weight difference in a 18x60 and a 20x54. There are plenty of guys on here that run a 1860 and do just fine.


Tue Jul 23, 2013 12:28 pm
Profile
MMT Sponsor
User avatar

Joined: Wed Jan 14, 2009 10:22 am
Posts: 1764
Location: Tyler, TX
Post Re: 20x54 custom
We built this boat and it is nearly identical to another we built and with Hoyt stage 2 GTR it was pushing 30+ which is the same motor going on this one.

Duals are not practical up here unless you are someone who has to have a larger heavy boat

_________________
Pete Willett
WC Custom Boats - Tyler, TX
http://www.wccustomboats.com


WC Custom 2048 3/16 Bottom Center Console with 35 PD EFI GTR
WC Custom 1840 Hybrid 3/16 Bottom with 37 EFI BOSS


Tue Jul 23, 2013 1:04 pm
Profile
MMT 1000 Club
User avatar

Joined: Sun Feb 26, 2012 10:49 pm
Posts: 1715
Location: Kingwood,TX
Post Re: 20x54 custom
Looks good hydrilla .. Willet does build a tank


Sent from... who cares..

_________________
1744 WC Custom
25 GTR


Tue Jul 23, 2013 3:44 pm
Profile
MMT Pro Member

Joined: Thu Nov 10, 2011 7:47 pm
Posts: 236
Location: Caddo lake, Tx
Post Re: 20x54 custom


Tue Jul 23, 2013 6:31 pm
Profile
MMT Pro Member

Joined: Thu Nov 10, 2011 7:47 pm
Posts: 236
Location: Caddo lake, Tx
Post Re: 20x54 custom
Hey willett bout 2 more months up here then I'm dropping my boat off for you


Tue Jul 23, 2013 6:33 pm
Profile
MMT Super Elite Member

Joined: Fri Dec 18, 2009 8:10 pm
Posts: 16915
Location: Rowlett, TX
Post Re: 20x54 custom


Tue Jul 23, 2013 6:35 pm
Profile
MMT Pro Member

Joined: Thu Nov 10, 2011 7:47 pm
Posts: 236
Location: Caddo lake, Tx
Post Re: 20x54 custom


Tue Jul 23, 2013 6:43 pm
Profile
MMT Pro Member

Joined: Mon Oct 04, 2010 12:12 pm
Posts: 111
Post Re: 20x54 custom
Mine will be dialed in and I got the high rev coils. I just hope I can get 27-28 out of it.


Tue Jul 23, 2013 7:11 pm
Profile
MMT Pro Member

Joined: Thu Nov 10, 2011 7:47 pm
Posts: 236
Location: Caddo lake, Tx
Post Re: 20x54 custom


Tue Jul 23, 2013 7:36 pm
Profile
MMT Pro Member

Joined: Fri Jun 03, 2011 7:55 am
Posts: 221
Location: Bullard, TX
Post Re: 20x54 custom
So I guess its workin out good for ya caddoz??


Wed Jul 24, 2013 6:51 am
Profile
MMT Pro Member

Joined: Thu Nov 10, 2011 7:47 pm
Posts: 236
Location: Caddo lake, Tx
Post Re: 20x54 custom


Wed Jul 24, 2013 7:39 am
Profile
MMT Pro Member

Joined: Fri Jun 03, 2011 7:55 am
Posts: 221
Location: Bullard, TX
Post Re: 20x54 custom
ya i did the same thing with about 5 big folks and a bunch of gear and she was struggling. needs the coils... carb....? ? should have been pretty close but not sure. I always ran super unlead.nwith some sea foam. glad you like it.


Wed Jul 24, 2013 4:56 pm
Profile
MMT Pro Member

Joined: Thu Nov 10, 2011 7:47 pm
Posts: 236
Location: Caddo lake, Tx
Post Re: 20x54 custom
Yea I'm sure it is but just going to check and make sure. I'm ready to come home and put some time on that boat. I think I'm going to get willett to drop one of the catwalks down to the floor (enclose it) for a gun/rod box. And rig it for bowfishing paint and turf and gator glide and call it done


Wed Jul 24, 2013 5:25 pm
Profile
MMT Pro Member

Joined: Mon Oct 04, 2010 12:12 pm
Posts: 111
Post Re: 20x54 custom
Got the Gator Glide on. Now I just have to wait on the drying time. Once this is done I will rig out the boat and get a formal review on the whole set up. It is coming together fast.


You do not have the required permissions to view the files attached to this post.


Tue Jul 30, 2013 10:26 am
Profile
MMT F.E.
User avatar

Joined: Thu Dec 15, 2011 8:29 pm
Posts: 775
Location: Bridge City, TX
Post Re: 20x54 custom
Lookin good

Sent from my DROID RAZR using Tapatalk 2

_________________
16.5' x 46" Instagator w/25GTRRRR
SetxPerformanceshop.com or (409)548-4477


Tue Jul 30, 2013 10:35 am
Profile
MMT Pro Member

Joined: Mon Oct 04, 2010 12:12 pm
Posts: 111
Post Re: 20x54 custom
Thanks.


Tue Jul 30, 2013 2:40 pm
Profile
MMT 1000 Club
User avatar

Joined: Sun Feb 26, 2012 10:49 pm
Posts: 1715
Location: Kingwood,TX
Post Re: 20x54 custom
You doing the rigging yourself ??


Sent from... who cares..

_________________
1744 WC Custom
25 GTR


Tue Jul 30, 2013 4:04 pm
Profile
MMT Pro Member

Joined: Mon Oct 04, 2010 12:12 pm
Posts: 111
Post Re: 20x54 custom
No, way to much going on this thing.


Tue Jul 30, 2013 5:48 pm
Profile
MMT Pro Member

Joined: Mon Oct 04, 2010 12:12 pm
Posts: 111
Post Re: 20x54 custom
here are a few updated pictures. I am still waiting on my lean to seat and hydro turf. I am sorry if the pictures are not right side up I don't know how to rotate them. I ran the boat yesterday but I believe the float is sticking in the carb. I should have this fixed today and then I will be able to give a formal review.


You do not have the required permissions to view the files attached to this post.


Mon Aug 05, 2013 7:33 am
Profile
MMT Elite Member

Joined: Wed Mar 11, 2009 12:45 pm
Posts: 9869
Post Re: 20x54 custom
Were there any performance issues with the carb? Or did you just have fuel coming out of the overflow hose?


Mon Aug 05, 2013 7:47 am
Profile
MMT Pro Member

Joined: Mon Oct 04, 2010 12:12 pm
Posts: 111
Post Re: 20x54 custom
don't think anything is wrong with the carb other then the overflow. I wont really know until I run it again. With the float being stuck in the carb then I am sure it was causing a performance issue because it was not getting the correct air-gas mixture. I hope to run it again today.


Mon Aug 05, 2013 7:52 am
Profile
MMT 1000 Club
User avatar

Joined: Sun Feb 26, 2012 10:49 pm
Posts: 1715
Location: Kingwood,TX
Post Re: 20x54 custom
Liking the setup ..


Sent from... who cares..

_________________
1744 WC Custom
25 GTR


Mon Aug 05, 2013 9:25 am
Profile
MMT Sponsor
User avatar

Joined: Thu Oct 01, 2009 4:49 pm
Posts: 8536
Location: Bridge City, TX
Post Re: 20x54 custom
Lookin good Darren. Get that carb adjusted & run up the hours on her!!!!

BTW, your carb cover shipped out this morning.

_________________
1846 GTB & 35 GTR
Team Gator-Tail

Killer Kallz & ANGLE PORT dealer
(409) 720-8949


Mon Aug 05, 2013 2:26 pm
Profile WWW
MMT Elite Member

Joined: Wed Mar 03, 2010 7:00 pm
Posts: 6060
Location: Choudrant, La
Post Re: 20x54 custom
Is that 7 2x2's?

_________________
CSM Custom 18x42 Battleship with a 36 PD beating you to the hole
My Rig (Old Motor) viewtopic.php?f=5&t=45193

(New Motor) viewtopic.php?f=5&t=54733

Stumps Fear Me


Mon Aug 05, 2013 7:28 pm
Profile
MMT Sponsor
User avatar

Joined: Wed Jan 14, 2009 10:22 am
Posts: 1764
Location: Tyler, TX
Post Re: 20x54 custom

_________________
Pete Willett
WC Custom Boats - Tyler, TX
http://www.wccustomboats.com


WC Custom 2048 3/16 Bottom Center Console with 35 PD EFI GTR
WC Custom 1840 Hybrid 3/16 Bottom with 37 EFI BOSS


Mon Aug 05, 2013 8:03 pm
Profile
MMT 1000 Club
User avatar

Joined: Wed Feb 09, 2011 1:56 pm
Posts: 1646
Location: Chauvin
Post Re: 20x54 custom
Nice!!


Mon Aug 05, 2013 8:16 pm
Profile
MMT Pro Member
User avatar

Joined: Sun Jan 16, 2011 4:48 pm
Posts: 251
Post Re: 20x54 custom
What are you running now?

TX

_________________
1756 Triton Duck edition
35hp Gator Tail


Mon Aug 05, 2013 8:24 pm
Profile
MMT Pro Member

Joined: Fri Jun 03, 2011 7:55 am
Posts: 221
Location: Bullard, TX
Post Re: 20x54 custom


Wed Aug 21, 2013 5:49 pm
Profile
MMT Pro Member

Joined: Mon Oct 04, 2010 12:12 pm
Posts: 111
Post Re: 20x54
updated info and pics up top.


Mon Aug 26, 2013 7:17 am
Profile
Display posts from previous:  Sort by  
Reply to topic   [ 34 posts ] 

Who is online

Users browsing this forum: No registered users and 43 guests


You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

Jump to: