Author |
Message |
GoDevilPro
MMT Pro Member
Joined: Sun Jan 22, 2012 10:28 pm Posts: 105 Location: Ponchatoula, LA
|
 GTR new tiller handle
Alright now anyone have to picture of the new tiller handle for the gtr and does anyone know if the 3 blade comes stock now?
_________________ Kleibert custom 18/50 push by a 35 gdsd with a lil pixie dust
|
Mon Mar 24, 2014 11:36 pm |
|
 |
fowllife08
MMT 1000 Club
Joined: Sun Sep 18, 2011 7:25 pm Posts: 3676 Location: down in da flats, LA
|
 Re: GTR new tiller handle
Yes and no
Seen a schematic for the new handle. And the 3 blades can be bought for 265+tax
_________________ 35 GTR chasin a BBC 1848
|
Wed Mar 26, 2014 1:43 pm |
|
 |
txmudcutter
MMT 1000 Club
Joined: Mon Jan 30, 2012 9:08 am Posts: 2307 Location: Nederland, TX (SETX)
|
 Re: GTR new tiller handle
Ive got a pic on the computer at the house ill try and remember and post it up later.
|
Wed Mar 26, 2014 1:54 pm |
|
 |
MaxP
MMT Pro Member
Joined: Mon Nov 19, 2012 7:12 pm Posts: 82 Location: Orangeville, LA
|
 Re: GTR new tiller handle
I was hangin out with GT guys at the Gonzales show, my motor will be done in a few weeks but they said 3 blades are standard along with the new cast unit. And the new tiller handle is bad ass to say the least I got mine comin with the 6" extension. But lemme tell u those new motor are legit no corners were cut. I had a 2009 model I didn't even have a marine motor lol so I'm pumped for this "new & improved engine" lol
_________________ 17/54 extreme hull stage 2 GTR(Hoyt's mods). 34.2mph @4450rpms
|
Wed Mar 26, 2014 8:09 pm |
|
 |
txmudcutter
MMT 1000 Club
Joined: Mon Jan 30, 2012 9:08 am Posts: 2307 Location: Nederland, TX (SETX)
|
 Re: GTR new tiller handle
only pic i got
You do not have the required permissions to view the files attached to this post.
|
Wed Mar 26, 2014 8:12 pm |
|
 |
jldsc
MMT Pro Member
Joined: Sat Feb 16, 2013 12:03 pm Posts: 461
|
 Re: GTR new tiller handle
it seems like they would put a dang trim switch on the end of the tiller
Sent from an Apple Tree..
|
Wed Mar 26, 2014 9:02 pm |
|
 |
Swamper01
MMT Pro Member
Joined: Tue Jan 14, 2014 7:57 pm Posts: 470 Location: Running between Manchac and the Basin
|
 Re: GTR new tiller handle
So what exaclty is new to it? Havent been up to date with the new motors except for the new lower unit.
_________________ 18x40 skiff/35 hp GTR
|
Wed Mar 26, 2014 9:18 pm |
|
 |
Bigrich
MMT Elite Member
Joined: Wed Dec 19, 2012 7:52 pm Posts: 7064 Location: Mallard country
|
 Re: GTR new tiller handle
|
Thu Mar 27, 2014 5:07 am |
|
 |
msm8281
MMT Elite Member
Joined: Fri Oct 09, 2009 1:50 pm Posts: 9673 Location: New Iberia, La.
|
 Re: GTR new tiller handle
The trim cover is different also. It probably has something to do with the handle.
|
Thu Mar 27, 2014 5:11 am |
|
 |
Bigrich
MMT Elite Member
Joined: Wed Dec 19, 2012 7:52 pm Posts: 7064 Location: Mallard country
|
 Re: GTR new tiller handle
Guess need to look on computer bc on phone still looks like same square box
|
Thu Mar 27, 2014 5:25 am |
|
 |
msm8281
MMT Elite Member
Joined: Fri Oct 09, 2009 1:50 pm Posts: 9673 Location: New Iberia, La.
|
 Re: GTR new tiller handle
It doesn't have the big hump on top. It's low profile.
|
Thu Mar 27, 2014 5:28 am |
|
 |
Wildberry
MMT 1000 Club
Joined: Sun Apr 22, 2012 6:17 pm Posts: 1018 Location: DA HAVEN FL,
|
 Re: GTR new tiller handle
They should eliminate the plastic throttle as well.
_________________ EMF 16x42, 3/16 skiff, 35 GTR Stage 0
|
Thu Mar 27, 2014 5:29 am |
|
 |
msm8281
MMT Elite Member
Joined: Fri Oct 09, 2009 1:50 pm Posts: 9673 Location: New Iberia, La.
|
 Re: GTR new tiller handle
|
Thu Mar 27, 2014 5:31 am |
|
 |
Bigrich
MMT Elite Member
Joined: Wed Dec 19, 2012 7:52 pm Posts: 7064 Location: Mallard country
|
 GTR new tiller handle
Looks just like my 13 model to me
|
Thu Mar 27, 2014 5:33 am |
|
 |
Gameover
MMT 1000 Club
Joined: Tue Jan 03, 2012 9:06 am Posts: 3673 Location: Prarieville,LA
|
 Re: GTR new tiller handle
_________________ 1754 GTR Xtreme CC w/ Purple Kool-aid Additives
Never Forget our Fallen Soliders
|
Thu Mar 27, 2014 5:51 am |
|
 |
North LA Hunter
MMT Elite Member
Joined: Mon Aug 02, 2010 8:39 pm Posts: 6976 Location: West Monroe, LA
|
 Re: GTR new tiller handle
The cover is different. Doesn't have the hump in it and looks like it goes over the handle. I think ddm said it was a cast alum cover too.
Sent from my beeper
|
Thu Mar 27, 2014 5:52 am |
|
 |
Gameover
MMT 1000 Club
Joined: Tue Jan 03, 2012 9:06 am Posts: 3673 Location: Prarieville,LA
|
 Re: GTR new tiller handle
_________________ 1754 GTR Xtreme CC w/ Purple Kool-aid Additives
Never Forget our Fallen Soliders
|
Thu Mar 27, 2014 5:59 am |
|
 |
Wildberry
MMT 1000 Club
Joined: Sun Apr 22, 2012 6:17 pm Posts: 1018 Location: DA HAVEN FL,
|
 Re: GTR new tiller handle
It looks good from what I can see. A good picture would help a lot though
_________________ EMF 16x42, 3/16 skiff, 35 GTR Stage 0
|
Thu Mar 27, 2014 6:08 am |
|
 |
Stihl Duck
MMT Pro Member
Joined: Mon Dec 20, 2010 9:23 am Posts: 143
|
 Re: GTR new tiller handle
Man, I'm at week 4/5 on my motor. Hopefully in a week or two it will be here with all these new upgrades plus a couple of stages added! Can't wait........
_________________ Stump Jumper 17x54 w/duck deck GTR 35 stage II
Stump Jumper Rep. for IN (Stumpjumperboats.com) Athens archery Bowfishing Pro Staff/Field Rep.
|
Thu Mar 27, 2014 10:09 am |
|
 |
North LA Hunter
MMT Elite Member
Joined: Mon Aug 02, 2010 8:39 pm Posts: 6976 Location: West Monroe, LA
|
 Re: GTR new tiller handle
Anyone have a idea when they are going to put these in production? I'm going to order a motor in July and curious if it will have the new upgrades.
Sent from my beeper
|
Thu Mar 27, 2014 10:30 am |
|
 |
MarshJB
MMT F.E.
Joined: Sat Jan 04, 2014 5:34 pm Posts: 932
|
 Re: GTR new tiller handle
_________________ 17x54 Extreme W/ GTR-35L Stage 1
|
Thu Mar 27, 2014 10:32 am |
|
 |
Full Throttle
MMT 1000 Club
Joined: Sun Jan 25, 2009 8:09 pm Posts: 1268 Location: North Texas
|
 Re: GTR new tiller handle
_________________ WC Custom 1854
|
Thu Mar 27, 2014 11:02 am |
|
 |
txkingfisher
MMT 1000 Club
Joined: Fri Apr 26, 2013 1:09 am Posts: 1121 Location: SETX
|
 Re: GTR new tiller handle
I'm surprised I haven't seen a bunch of pictures of those big ugly ass plastic boxes broken off and smashed to pieces. It looks flimsy....... but evidently isn't
_________________ 13' Jefferson fiberglass skiff - 14 Copperhead
|
Thu Mar 27, 2014 2:58 pm |
|
 |
msm8281
MMT Elite Member
Joined: Fri Oct 09, 2009 1:50 pm Posts: 9673 Location: New Iberia, La.
|
 Re: GTR new tiller handle
|
Thu Mar 27, 2014 3:05 pm |
|
 |
dguidry
MMT Super Elite Member
Joined: Tue Jun 29, 2010 1:20 pm Posts: 11166 Location: Cecilia, LA
|
 Re: GTR new tiller handle
_________________ Formerly:1648 Homemade Cypress Crawfish Skiff GTR23 Performance Cam and Heads; 17x46 Gator Tail with 35GTR and Hoyt's cam;s Currently: 17x48 Gator Tail with XD40 EFI. “Wisdom is not just expertise. It is knowing how much of various areas of expertise you need to know in order to make the decisions that the world needs and that you want to do,” Columbia University President Lee Bollinger.
|
Thu Mar 27, 2014 3:06 pm |
|
 |
North LA Hunter
MMT Elite Member
Joined: Mon Aug 02, 2010 8:39 pm Posts: 6976 Location: West Monroe, LA
|
 Re: GTR new tiller handle
|
Thu Mar 27, 2014 3:11 pm |
|
 |
txkingfisher
MMT 1000 Club
Joined: Fri Apr 26, 2013 1:09 am Posts: 1121 Location: SETX
|
 Re: GTR new tiller handle
Go fuck yourself Dean.
NorthLaHunter, seems like it would eventually catch a tree branch or something.
_________________ 13' Jefferson fiberglass skiff - 14 Copperhead
|
Thu Mar 27, 2014 3:25 pm |
|
 |
fowllife08
MMT 1000 Club
Joined: Sun Sep 18, 2011 7:25 pm Posts: 3676 Location: down in da flats, LA
|
 Re: GTR new tiller handle
_________________ 35 GTR chasin a BBC 1848
|
Thu Mar 27, 2014 8:15 pm |
|
 |
North LA Hunter
MMT Elite Member
Joined: Mon Aug 02, 2010 8:39 pm Posts: 6976 Location: West Monroe, LA
|
 Re: GTR new tiller handle
|
Thu Mar 27, 2014 8:23 pm |
|
 |
txkingfisher
MMT 1000 Club
Joined: Fri Apr 26, 2013 1:09 am Posts: 1121 Location: SETX
|
 Re: GTR new tiller handle
nah, might just have fun going off the deep end until I get banned....
_________________ 13' Jefferson fiberglass skiff - 14 Copperhead
|
Thu Mar 27, 2014 8:37 pm |
|
 |
Wildberry
MMT 1000 Club
Joined: Sun Apr 22, 2012 6:17 pm Posts: 1018 Location: DA HAVEN FL,
|
 Re: GTR new tiller handle
Any updated pics of the new tiller 
_________________ EMF 16x42, 3/16 skiff, 35 GTR Stage 0
|
Sun May 04, 2014 5:07 pm |
|
 |
shark31
MMT Member
Joined: Thu Jul 22, 2010 1:42 pm Posts: 14 Location: Atlanta
|
 Re: GTR new tiller handle
Any word on if these will retrofit to a older motor?
|
Mon Sep 01, 2014 8:37 am |
|
 |
|