Where can you get the rubber spacer that goes between the handle and plate on a prodrive frame. The dealer around here is worthless and im ready to get it together an go play tired of waiting.

Thanks

call them direct - they are real easy to deal with

When I wanted to raise my handle I put taller "bushings" in. I went to my local hardware store and bought some rubber plugs,washers and bolts. They don't have the captured washer and bolt like the pd ones, but they still work fine. Just an idea if your in a hurry...

1756 Phowler 36PD

I had to order new ones when fedex fucked mine up during shipment, if memory serves me correct they were like $8 a pop direct from PD and I had them all the way up here in god's country in 2 days

I went to Tractor Supply and got some rubber mat. Cut 2 circles 2" diameter, put a washer on both sids and a bolt with locking washers on it. Measures same as other ones and it cost me nothing but a bolt and nut. I can send pics to someone if they want to post. Its rigged but think it will work well. Prodrive said just stuff a pile of washers in it and go hunt.