Author |
Message |
KAquack
MMT Pro Member
Joined: Thu Aug 07, 2014 6:26 am Posts: 114 Location: Northeast Alabama
|
![Post Post](./styles/acidtech_tiger/imageset/icon_topic_latest.gif) My G3 Build
This is my 16ft G3 with a 23hp copperhead I picked up off of a buddy for a really good deal its a little rough but a good project boat. I am in college so money is tight, but I am going to do what I can when I can.
IMG_3505.jpgIMG_3503.jpgIMG_3504.jpg
You do not have the required permissions to view the files attached to this post.
_________________ G3 project boat
|
Thu Aug 14, 2014 6:24 am |
|
![](./styles/acidtech_tiger/theme/images/spacer.gif) |
KAquack
MMT Pro Member
Joined: Thu Aug 07, 2014 6:26 am Posts: 114 Location: Northeast Alabama
|
![Post Post](./styles/acidtech_tiger/imageset/icon_topic_latest.gif) My G3 Build
Shortly after getting the boat, I was giving the motor good cleaning and oil change etc. I came across the belt being wore on the side. I contacted Copperhead and they knew exactly what the problem was. Apparently they had some confusion with one of their parts dealers and they where sent thread sealer instead of thread lock. ![Laughing :lol:](./images/smilies/icon_lol.gif) how this happens I have no idea but they shipped me a new belt and new upper gear with no cost to me. They also threw in a couple tshirts for me to wear during bowfishing tournaments. I switched everything out and I have put about 25 hrs on it since them and no more odd belt wear. IMG_3508.jpgIMG_3507.jpgIMG_3508.jpg
You do not have the required permissions to view the files attached to this post.
_________________ G3 project boat
|
Thu Aug 14, 2014 6:35 am |
|
![](./styles/acidtech_tiger/theme/images/spacer.gif) |
KAquack
MMT Pro Member
Joined: Thu Aug 07, 2014 6:26 am Posts: 114 Location: Northeast Alabama
|
![Post Post](./styles/acidtech_tiger/imageset/icon_topic_latest.gif) Re: My G3 Build
the next step was fixing the floor and deck. the paint was absolutely terrible. also under the deck of the boat smelt of carp and gar slime. So I spent the next couple weeks sanding and cleaning the inside of the boat out. Also this was my girlfriends first time bowfishing and my dogs first time on the boat.
IMG_3628.jpgIMG_3506.jpg
You do not have the required permissions to view the files attached to this post.
_________________ G3 project boat
|
Thu Aug 14, 2014 6:40 am |
|
![](./styles/acidtech_tiger/theme/images/spacer.gif) |
KAquack
MMT Pro Member
Joined: Thu Aug 07, 2014 6:26 am Posts: 114 Location: Northeast Alabama
|
![Post Post](./styles/acidtech_tiger/imageset/icon_topic_latest.gif) Re: My G3 Build
This is some more pictures during the weeks I was sanding and cleaning out the inside of the boat. I decided to bedliner the inside of the boat due to the fact paint just does not hold up to the wear and tear of bowfishing.
IMG_3683.jpgIMG_3695.jpgIMG_3633.jpg
You do not have the required permissions to view the files attached to this post.
_________________ G3 project boat
|
Thu Aug 14, 2014 6:49 am |
|
![](./styles/acidtech_tiger/theme/images/spacer.gif) |
KAquack
MMT Pro Member
Joined: Thu Aug 07, 2014 6:26 am Posts: 114 Location: Northeast Alabama
|
![Post Post](./styles/acidtech_tiger/imageset/icon_topic_latest.gif) Re: My G3 Build
So after of hour of slaving away in the Alabama heat in my parents garage the inside of my boat has been sanded and bedlinered. I looks great and holds up a lot better than normal paint. It has also made the inside of my boat quieter but that doesnt matter when im running across the water or running my generator in the boat but it does cut down on the generator vibrations and make it very quite the sitting in the shade drinking cold beers.
IMG_3915.jpgIMG_3914.jpgIMG_3913.jpg
You do not have the required permissions to view the files attached to this post.
_________________ G3 project boat
|
Thu Aug 14, 2014 6:59 am |
|
![](./styles/acidtech_tiger/theme/images/spacer.gif) |
KAquack
MMT Pro Member
Joined: Thu Aug 07, 2014 6:26 am Posts: 114 Location: Northeast Alabama
|
![Post Post](./styles/acidtech_tiger/imageset/icon_topic_latest.gif) Re: My G3 Build
My next project was removing two of my Halogen lights and replacing them with metal halide lights. I also added some green LEDs to the inside of the boat during this time. I installed a BPS throttle and throttle cable. The plastic throttle that came on the copperhead was terrible. I have pretty large hands and the tiny plastic one would dig into my hand.
IMG_3958.jpgIMG_4016.jpgIMG_4017.jpg
You do not have the required permissions to view the files attached to this post.
_________________ G3 project boat
|
Thu Aug 14, 2014 7:05 am |
|
![](./styles/acidtech_tiger/theme/images/spacer.gif) |
KAquack
MMT Pro Member
Joined: Thu Aug 07, 2014 6:26 am Posts: 114 Location: Northeast Alabama
|
![Post Post](./styles/acidtech_tiger/imageset/icon_topic_latest.gif) Re: My G3 Build
Here is a little shot of the new lights and LEDS. IMG_4018.jpg
You do not have the required permissions to view the files attached to this post.
_________________ G3 project boat
|
Thu Aug 14, 2014 7:07 am |
|
![](./styles/acidtech_tiger/theme/images/spacer.gif) |
btmannin
MMT 1000 Club
Joined: Tue Jan 15, 2013 5:25 pm Posts: 1723 Location: Oxford/Jackson ms
|
![Post Post](./styles/acidtech_tiger/imageset/icon_topic_latest.gif) Re: My G3 Build
Great work man, looks good.. More pics of girlfriend please ![Laughing :lol:](./images/smilies/icon_lol.gif)
_________________ 1436 tin can shoved by a 16 GDLT 16.5x48 running like hell from a built 40 merc
Well they call me king turd up here on shit mountain, but if you want it you can have the crown.
|
Thu Aug 14, 2014 7:26 am |
|
![](./styles/acidtech_tiger/theme/images/spacer.gif) |
KAquack
MMT Pro Member
Joined: Thu Aug 07, 2014 6:26 am Posts: 114 Location: Northeast Alabama
|
![Post Post](./styles/acidtech_tiger/imageset/icon_topic_latest.gif) Re: My G3 Build
_________________ G3 project boat
|
Thu Aug 14, 2014 7:55 am |
|
![](./styles/acidtech_tiger/theme/images/spacer.gif) |
redfisher3
MMT Pro Member
Joined: Tue Jul 22, 2014 6:24 pm Posts: 194 Location: SE Louisiana
|
![Post Post](./styles/acidtech_tiger/imageset/icon_topic_latest.gif) Re: My G3 Build
Looks good, the boat and the lady friend!
What is your light rail made of? how is it connected to the deck?
Thanks.
_________________ 2015 1854 Prodigy Evolve Side Console 37 GTR
|
Thu Aug 14, 2014 9:46 am |
|
![](./styles/acidtech_tiger/theme/images/spacer.gif) |
KAquack
MMT Pro Member
Joined: Thu Aug 07, 2014 6:26 am Posts: 114 Location: Northeast Alabama
|
![Post Post](./styles/acidtech_tiger/imageset/icon_topic_latest.gif) Re: My G3 Build
_________________ G3 project boat
|
Thu Aug 14, 2014 10:21 am |
|
![](./styles/acidtech_tiger/theme/images/spacer.gif) |
KAquack
MMT Pro Member
Joined: Thu Aug 07, 2014 6:26 am Posts: 114 Location: Northeast Alabama
|
![Post Post](./styles/acidtech_tiger/imageset/icon_topic_latest.gif) Re: My G3 Build
ImageUploadedByTapatalk1408356769.656704.jpgImageUploadedByTapatalk1408356798.955959.jpg a couple shots from the backwater big fish challenge this past weekend
You do not have the required permissions to view the files attached to this post.
_________________ G3 project boat
|
Mon Aug 18, 2014 4:14 am |
|
![](./styles/acidtech_tiger/theme/images/spacer.gif) |
Flaboy
MMT Member
Joined: Sun Aug 24, 2014 7:31 pm Posts: 21 Location: Tallahassee, FL
|
![Post Post](./styles/acidtech_tiger/imageset/icon_topic_latest.gif) Re: My G3 Build
I'm new to the site, just finished my G3 build, I'll post pics of it soon, yours turned out nice! Mines a 1756 and I put a new 36 prodrive on it (2014) it runs good but it's a dog outta the hole with a load. That motor is very heavy and everyone has to move to the front when I'm starting to get on step, thinking about putting some pods on the back to offset the weight some, anyone know if this will help? I moved the fuel tank to the front but the battery is still in the back. Thinking about moving it to the front as well just not sure I want the battery that close to the fuel tank in a fairly closed area. Thoughts?
|
Sun Aug 24, 2014 7:52 pm |
|
![](./styles/acidtech_tiger/theme/images/spacer.gif) |
KAquack
MMT Pro Member
Joined: Thu Aug 07, 2014 6:26 am Posts: 114 Location: Northeast Alabama
|
![Post Post](./styles/acidtech_tiger/imageset/icon_topic_latest.gif) Re: My G3 Build
_________________ G3 project boat
|
Mon Aug 25, 2014 2:16 am |
|
![](./styles/acidtech_tiger/theme/images/spacer.gif) |
KAquack
MMT Pro Member
Joined: Thu Aug 07, 2014 6:26 am Posts: 114 Location: Northeast Alabama
|
![Post Post](./styles/acidtech_tiger/imageset/icon_topic_latest.gif) Re: My G3 Build
IMG_5803.jpg
I have in the process of painting my paint. Last weekend I pulled all the stickers and gave her a good bath. I am using the Styx River Old School Drake camo. I have put two coats of the base coat on. The picture was directly after the second coat when I pushed it back into the garage. This Weekend im going to pull it off the trailer and flip it to begin the stencil process.
You do not have the required permissions to view the files attached to this post.
_________________ G3 project boat
|
Mon Aug 25, 2014 10:16 am |
|
![](./styles/acidtech_tiger/theme/images/spacer.gif) |
Smoke
MMT 1000 Club
Joined: Fri Jan 23, 2009 1:27 pm Posts: 1095 Location: SW Michigan
|
![Post Post](./styles/acidtech_tiger/imageset/icon_topic_latest.gif) Re: My G3 Build
Looks real good bro, nice job. I wondered if you were going to leave the monster stickers on. Looks like my kids boat with them on! Congrats on the baby: but you better buy your shit now before she has it! Not telling you what to do by any means, but it will be a huge change mostly for the better, except in the financial dept. Again nice looking rig and it should work out great for you.
_________________ 1854 Prodigy Open HDR/Stage 3 mods Prodigy Boats Pro Staff BPS Swamp Staff Member Blackwater Marine LLC.
Quote classic by rangerp: "Red seemed to be enjoying herself, and I assume by the look on her face was about to hit the high-note and throw a locate as she treed the possum."
|
Mon Aug 25, 2014 10:30 am |
|
![](./styles/acidtech_tiger/theme/images/spacer.gif) |
KAquack
MMT Pro Member
Joined: Thu Aug 07, 2014 6:26 am Posts: 114 Location: Northeast Alabama
|
![Post Post](./styles/acidtech_tiger/imageset/icon_topic_latest.gif) Re: My G3 Build
_________________ G3 project boat
|
Mon Aug 25, 2014 10:51 am |
|
![](./styles/acidtech_tiger/theme/images/spacer.gif) |
DmaxHunter
MMT 1000 Club
Joined: Wed Jan 18, 2012 7:21 pm Posts: 2207 Location: North Alabama
|
![Post Post](./styles/acidtech_tiger/imageset/icon_topic_latest.gif) Re: My G3 Build
Nice bro
_________________ 2014 PRODIGY 1754 (#19) 2014 5500 BAMF HDR RETRO SOLD
2010 Gator Tail Gator Series 18x54 pushed by a 2020 40GTRXD
|
Mon Aug 25, 2014 1:23 pm |
|
![](./styles/acidtech_tiger/theme/images/spacer.gif) |
KAquack
MMT Pro Member
Joined: Thu Aug 07, 2014 6:26 am Posts: 114 Location: Northeast Alabama
|
![Post Post](./styles/acidtech_tiger/imageset/icon_topic_latest.gif) Re: My G3 Build
_________________ G3 project boat
|
Mon Aug 25, 2014 1:49 pm |
|
![](./styles/acidtech_tiger/theme/images/spacer.gif) |
msudawg10
MMT Pro Member
Joined: Fri Feb 10, 2012 10:04 am Posts: 70 Location: Jafrica, MS
|
![Post Post](./styles/acidtech_tiger/imageset/icon_topic_latest.gif) Re: My G3 Build
What kind of speeds are you getting with the 23? Have you put a GPS on it?
|
Wed Aug 27, 2014 1:04 pm |
|
![](./styles/acidtech_tiger/theme/images/spacer.gif) |
KAquack
MMT Pro Member
Joined: Thu Aug 07, 2014 6:26 am Posts: 114 Location: Northeast Alabama
|
![Post Post](./styles/acidtech_tiger/imageset/icon_topic_latest.gif) Re: My G3 Build
_________________ G3 project boat
|
Wed Aug 27, 2014 2:56 pm |
|
![](./styles/acidtech_tiger/theme/images/spacer.gif) |
KAquack
MMT Pro Member
Joined: Thu Aug 07, 2014 6:26 am Posts: 114 Location: Northeast Alabama
|
![Post Post](./styles/acidtech_tiger/imageset/icon_topic_latest.gif) Re: My G3 Build
ImageUploadedByTapatalk1409645764.966653.jpgImageUploadedByTapatalk1409645780.683185.jpgImageUploadedByTapatalk1409645797.748843.jpg
You do not have the required permissions to view the files attached to this post.
_________________ G3 project boat
|
Tue Sep 02, 2014 2:16 am |
|
![](./styles/acidtech_tiger/theme/images/spacer.gif) |
KAquack
MMT Pro Member
Joined: Thu Aug 07, 2014 6:26 am Posts: 114 Location: Northeast Alabama
|
![Post Post](./styles/acidtech_tiger/imageset/icon_topic_latest.gif) Re: My G3 Build
ImageUploadedByTapatalk1409645827.648923.jpgImageUploadedByTapatalk1409645837.815315.jpgImageUploadedByTapatalk1409645847.248827.jpg
No more black I am very satisfied with the end result it turned out very well in my opinion. I made a couple errors but I was expecting it. Can't wait to get it in the water this weekend.
You do not have the required permissions to view the files attached to this post.
_________________ G3 project boat
|
Tue Sep 02, 2014 2:19 am |
|
![](./styles/acidtech_tiger/theme/images/spacer.gif) |
gfowel
MMT 1000 Club
Joined: Thu Mar 01, 2012 4:52 pm Posts: 1024 Location: Florida
|
![Post Post](./styles/acidtech_tiger/imageset/icon_topic_latest.gif) Re: My G3 Build
Looks good, nice job.
|
Tue Sep 02, 2014 2:31 am |
|
![](./styles/acidtech_tiger/theme/images/spacer.gif) |
KAquack
MMT Pro Member
Joined: Thu Aug 07, 2014 6:26 am Posts: 114 Location: Northeast Alabama
|
![Post Post](./styles/acidtech_tiger/imageset/icon_topic_latest.gif) Re: My G3 Build
_________________ G3 project boat
|
Tue Sep 02, 2014 3:56 am |
|
![](./styles/acidtech_tiger/theme/images/spacer.gif) |
DmaxHunter
MMT 1000 Club
Joined: Wed Jan 18, 2012 7:21 pm Posts: 2207 Location: North Alabama
|
![Post Post](./styles/acidtech_tiger/imageset/icon_topic_latest.gif) Re: My G3 Build
Looks good bro
_________________ 2014 PRODIGY 1754 (#19) 2014 5500 BAMF HDR RETRO SOLD
2010 Gator Tail Gator Series 18x54 pushed by a 2020 40GTRXD
|
Tue Sep 02, 2014 7:47 am |
|
![](./styles/acidtech_tiger/theme/images/spacer.gif) |
KAquack
MMT Pro Member
Joined: Thu Aug 07, 2014 6:26 am Posts: 114 Location: Northeast Alabama
|
![Post Post](./styles/acidtech_tiger/imageset/icon_topic_latest.gif) Re: My G3 Build
_________________ G3 project boat
|
Tue Sep 02, 2014 8:18 am |
|
![](./styles/acidtech_tiger/theme/images/spacer.gif) |
DmaxHunter
MMT 1000 Club
Joined: Wed Jan 18, 2012 7:21 pm Posts: 2207 Location: North Alabama
|
![Post Post](./styles/acidtech_tiger/imageset/icon_topic_latest.gif) Re: My G3 Build
You ever decide on a name?
_________________ 2014 PRODIGY 1754 (#19) 2014 5500 BAMF HDR RETRO SOLD
2010 Gator Tail Gator Series 18x54 pushed by a 2020 40GTRXD
|
Tue Sep 02, 2014 9:08 am |
|
![](./styles/acidtech_tiger/theme/images/spacer.gif) |
KAquack
MMT Pro Member
Joined: Thu Aug 07, 2014 6:26 am Posts: 114 Location: Northeast Alabama
|
![Post Post](./styles/acidtech_tiger/imageset/icon_topic_latest.gif) Re: My G3 Build
_________________ G3 project boat
|
Tue Sep 02, 2014 2:06 pm |
|
![](./styles/acidtech_tiger/theme/images/spacer.gif) |
DmaxHunter
MMT 1000 Club
Joined: Wed Jan 18, 2012 7:21 pm Posts: 2207 Location: North Alabama
|
![Post Post](./styles/acidtech_tiger/imageset/icon_topic_latest.gif) Re: My G3 Build
I'm horrible with kind of stuff bud, wish I could help. Got my motor running. I'm down to take a day off work for a ride.
_________________ 2014 PRODIGY 1754 (#19) 2014 5500 BAMF HDR RETRO SOLD
2010 Gator Tail Gator Series 18x54 pushed by a 2020 40GTRXD
|
Tue Sep 02, 2014 4:20 pm |
|
![](./styles/acidtech_tiger/theme/images/spacer.gif) |
KAquack
MMT Pro Member
Joined: Thu Aug 07, 2014 6:26 am Posts: 114 Location: Northeast Alabama
|
![Post Post](./styles/acidtech_tiger/imageset/icon_topic_latest.gif) Re: My G3 Build
_________________ G3 project boat
|
Tue Sep 02, 2014 4:46 pm |
|
![](./styles/acidtech_tiger/theme/images/spacer.gif) |
DmaxHunter
MMT 1000 Club
Joined: Wed Jan 18, 2012 7:21 pm Posts: 2207 Location: North Alabama
|
![Post Post](./styles/acidtech_tiger/imageset/icon_topic_latest.gif) Re: My G3 Build
After teal season. I'm down for any day during week, but a weekend I can get a day off. It's whenever is good for everybody around these parts
_________________ 2014 PRODIGY 1754 (#19) 2014 5500 BAMF HDR RETRO SOLD
2010 Gator Tail Gator Series 18x54 pushed by a 2020 40GTRXD
|
Tue Sep 02, 2014 6:03 pm |
|
![](./styles/acidtech_tiger/theme/images/spacer.gif) |
KAquack
MMT Pro Member
Joined: Thu Aug 07, 2014 6:26 am Posts: 114 Location: Northeast Alabama
|
![Post Post](./styles/acidtech_tiger/imageset/icon_topic_latest.gif) Re: My G3 Build
_________________ G3 project boat
|
Tue Sep 02, 2014 6:07 pm |
|
![](./styles/acidtech_tiger/theme/images/spacer.gif) |
KAquack
MMT Pro Member
Joined: Thu Aug 07, 2014 6:26 am Posts: 114 Location: Northeast Alabama
|
![Post Post](./styles/acidtech_tiger/imageset/icon_topic_latest.gif) Re: My G3 Build
ImageUploadedByTapatalk1410197668.590335.jpg
You do not have the required permissions to view the files attached to this post.
_________________ G3 project boat
|
Mon Sep 08, 2014 11:34 am |
|
![](./styles/acidtech_tiger/theme/images/spacer.gif) |
Flaboy
MMT Member
Joined: Sun Aug 24, 2014 7:31 pm Posts: 21 Location: Tallahassee, FL
|
![Post Post](./styles/acidtech_tiger/imageset/icon_topic_latest.gif) Re: My G3 Build
Looks real good man! I did the bed liner in mine as well and couldn't be happier with it. Very similar color. I'll post my build pics on in a new forum g-3 1756 build.
|
Sat Sep 13, 2014 3:36 pm |
|
![](./styles/acidtech_tiger/theme/images/spacer.gif) |
KAquack
MMT Pro Member
Joined: Thu Aug 07, 2014 6:26 am Posts: 114 Location: Northeast Alabama
|
![Post Post](./styles/acidtech_tiger/imageset/icon_topic_latest.gif) Re: My G3 Build
_________________ G3 project boat
|
Sat Sep 13, 2014 7:34 pm |
|
![](./styles/acidtech_tiger/theme/images/spacer.gif) |
Flaboy
MMT Member
Joined: Sun Aug 24, 2014 7:31 pm Posts: 21 Location: Tallahassee, FL
|
![Post Post](./styles/acidtech_tiger/imageset/icon_topic_latest.gif) Re: My G3 Build
I scrub it down with bleach water, works pretty good, I used a bed liner called grizzly grip, I scrub the shit of it, been doing it 3-4 months now and still looks fairly new.
|
Sun Sep 14, 2014 3:55 am |
|
![](./styles/acidtech_tiger/theme/images/spacer.gif) |
KAquack
MMT Pro Member
Joined: Thu Aug 07, 2014 6:26 am Posts: 114 Location: Northeast Alabama
|
![Post Post](./styles/acidtech_tiger/imageset/icon_topic_latest.gif) Re: My G3 Build
_________________ G3 project boat
|
Thu Sep 18, 2014 7:08 pm |
|
![](./styles/acidtech_tiger/theme/images/spacer.gif) |
Flaboy
MMT Member
Joined: Sun Aug 24, 2014 7:31 pm Posts: 21 Location: Tallahassee, FL
|
![Post Post](./styles/acidtech_tiger/imageset/icon_topic_latest.gif) Re: My G3 Build
how can i start a new thread? this is some bs! i wanna show my new build off!!! help plz
|
Thu Sep 18, 2014 9:38 pm |
|
![](./styles/acidtech_tiger/theme/images/spacer.gif) |
KAquack
MMT Pro Member
Joined: Thu Aug 07, 2014 6:26 am Posts: 114 Location: Northeast Alabama
|
![Post Post](./styles/acidtech_tiger/imageset/icon_topic_latest.gif) Re: My G3 Build
_________________ G3 project boat
|
Fri Sep 19, 2014 5:52 am |
|
![](./styles/acidtech_tiger/theme/images/spacer.gif) |
|