| Author |
Message |
|
CLICKSTER
MMT 1000 Club
Joined: Sat Feb 12, 2011 4:08 pm
Posts: 1552
|
 Pitched and Cupped Had a prop with a little wear and instead of ordering a new one i decided to take it and get a little cup put back into it and i pitched it. I wanted the pitch because when i'm rolling single i'm all up in 4800 plus but i wont hold it that long. So with the extra pitch what should i expect from the extra cup and pitch in rpms and speed?
|
| Tue Feb 10, 2015 10:54 am |
|
|
|
Kja0792
MMT Pro Member
Joined: Tue Feb 21, 2012 2:36 pm
Posts: 444
|
Re: Pitched and Cupped No one knows
|
| Tue Feb 10, 2015 11:16 am |
|
|
|
msm8281
MMT Elite Member
Joined: Fri Oct 09, 2009 1:50 pm
Posts: 9673
Location: New Iberia, La.
|
Re: Pitched and Cupped Lil more speed from pitch and a drop in rpms. It'll probably dig better from the added cup.
|
| Tue Feb 10, 2015 11:55 am |
|
|
|
calphil
MMT 1000 Club
Joined: Sun Feb 26, 2012 10:49 pm
Posts: 1715
Location: Kingwood,TX
|
Re: Pitched and Cupped 1" generaLly drops 200ish RPM's
_________________
1744 WC Custom
25 GTR
|
| Tue Feb 10, 2015 12:05 pm |
|
|
|
CLICKSTER
MMT 1000 Club
Joined: Sat Feb 12, 2011 4:08 pm
Posts: 1552
|
Re: Pitched and Cupped
|
| Tue Feb 10, 2015 12:13 pm |
|
|
|
LA Prop
MMT Sponsor
Joined: Sat Feb 01, 2014 6:31 pm
Posts: 1008
|
Re: Pitched and Cupped cupping pulls more rpm than pitching does so u gotta be careful what u ask for I did one for a customer who wanted a 13p with a lot of cup and he couldnt even get on step pulled some of the cup down ran very well after as a 13 with light cupping
_________________
20' homemade skiff with a stage 2 gtr
|
| Sun Mar 01, 2015 12:06 pm |
|
|
|
scarygary
MMT Pro Member
Joined: Fri Aug 29, 2014 2:36 pm
Posts: 442
|
Re: Pitched and Cupped ^^^^ that's right. If you keep the same pitch and put a lot of cup you could drop your rpm to much and loose top end. There is some trial and error that must be done when tweaking props.
|
| Sun Mar 01, 2015 12:36 pm |
|
|
|
