It is currently Sun May 11, 2025 5:17 pm




Reply to topic  [ 10 posts ] 
 Prop for 16 hp long tail 
Author Message
MMT Pro Member
User avatar

Joined: Thu May 14, 2015 7:43 am
Posts: 174
Location: SLC, UT/ARK-LA-TEX bred
Post Prop for 16 hp long tail
Anyone know a good 8x4 prop for a 16 hp go devil long tail? Im running a 9x3 right now and am only turning about 3000 rpms on the top end so im trying to get more top end speed. I get I may lose some bit in the mud.

Just wondering if anyone knew of anyone that made good props for what Im looking for.

_________________
40 Go Devil FNR on 20x48 WC Custom --


Thu Sep 10, 2015 9:14 am
Profile
MMT Pro Member

Joined: Sun Oct 05, 2014 5:52 pm
Posts: 175
Post Re: Prop for 16 hp long tail
Is the 16hp a single cyl or twin? You should be getting more rpms than that depending on your boat size and load

Sent from my SCH-R890 using Tapatalk


Fri Sep 11, 2015 6:12 pm
Profile
MMT 1000 Club
User avatar

Joined: Wed Jan 14, 2009 8:58 pm
Posts: 2731
Location: Lafayette, LA
Post Re: Prop for 16 hp long tail
X2

_________________
1644 WeldCraft / 27 GDLT
Ranger R71 / 125 Merc


Fri Sep 11, 2015 6:41 pm
Profile
MMT 1000 Club
User avatar

Joined: Wed Jul 01, 2015 6:06 pm
Posts: 1447
Location: South central, ks
Post Re: Prop for 16 hp long tail
16 is single

Pretty sure most of MMT is humusexshuls in hiding


Fri Sep 11, 2015 8:00 pm
Profile
MMT Pro Member

Joined: Sun Oct 05, 2014 5:52 pm
Posts: 175
Post Re: Prop for 16 hp long tail
Vanguards are twins

Sent from my SCH-R890 using Tapatalk


Sun Sep 13, 2015 12:20 pm
Profile
MMT 1000 Club
User avatar

Joined: Wed Jan 14, 2009 8:58 pm
Posts: 2731
Location: Lafayette, LA
Post Re: Prop for 16 hp long tail
16s are V and should be turning more than that. 9x3 is the correct prop.

_________________
1644 WeldCraft / 27 GDLT
Ranger R71 / 125 Merc


Sun Sep 13, 2015 5:30 pm
Profile
MMT Pro Member

Joined: Mon Feb 02, 2015 2:28 pm
Posts: 84
Post Re: Prop for 16 hp long tail
what brand of motor is it? I have a 16hp duromax which i believe turns 3800. I run a 8x4 from backwater. I've had other guys on here tell me try a 9x3 from go devil also.


Mon Sep 14, 2015 8:26 am
Profile
MMT 1000 Club
User avatar

Joined: Thu Jan 31, 2013 5:42 pm
Posts: 1913
Location: Conroe tx
Post Re: Prop for 16 hp long tail
I've had from 9 hp, 16hp ,23and 25hp longtails, 16hp=9x 3 prop , use backwater or go devil.

H Finn

_________________
Ole black water keep on rolling

18x54 Uncle J -GTR - with the koolaid
Back H2o SWOMP 23 SS stage 2 15x36 GD Duck Skiff GATOR
GATOR GLIDE PROSTAFF
BACKWATER PROSTAFF
http://www.gatorglide.com

Coupe rest in peace brother


Mon Sep 14, 2015 12:03 pm
Profile
MMT Pro Member
User avatar

Joined: Thu May 14, 2015 7:43 am
Posts: 174
Location: SLC, UT/ARK-LA-TEX bred
Post Re: Prop for 16 hp long tail
Briggs twin Cylinder. Ive done everything I can to get the RPMs up, replaced the carb, fuel pump, brand new 9x3 prop, readjusted the governors tab, bent the governors tab (out toward carb). The only thing I was able to do was get the RPMs up without a load but as soon as I drop it in the water, no matter how many rpms it was turning without the load, it stays steady at 3080 or so at max power. Its an relatively old motor I guess - 2005, so ive just figured thats all she'd pull. The only thing I havent tried was throwing the 8x4 prop on it.

Also I have it on a small riveted 14 ft flat bottom which is only rated for a 20 hp outboard. It turns that with just me in the boat. The only over weight ratio would be the motor to the boat. The transom is rated for a max weight of 115 lbs I figure (Thats how much 20 hp outboard weighs), this long tail weighs 177 lbs so the motor on the transom of the boat is significantly over weight but I still feel like that wouldn't have anything to do with it Im just over thinking everything because Ive tried everything under the sun.

Im currently saving up for a brand new 23 copperhead which will give 7 more hp and make me about 40 lbs lighter so Il be in bizz then

_________________
40 Go Devil FNR on 20x48 WC Custom --


Thu Sep 17, 2015 9:23 am
Profile
MMT Member

Joined: Thu Oct 16, 2014 1:50 pm
Posts: 19
Post Re: Prop for 16 hp long tail
You might try an 8x4 from Hill Marine


Sent from my iPhone using Tapatalk


Mon Sep 21, 2015 4:46 pm
Profile
Display posts from previous:  Sort by  
Reply to topic   [ 10 posts ] 

Who is online

Users browsing this forum: No registered users and 139 guests


You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

Jump to: