I have a level 3.5 Delta GTRXD on a 1754 Timber Creek. It has the stock prop that Delta worked right now. I want to try a 2 blade but not sure what one to get. Delta doesn’t sell worked 2 blades anymore so a big blade or a hammer i guess are my only options. I turn 4700-4900 rpm no matter what load is in the boat. Tyler at Timber Creek told me i coukd get a 2 blade worked by someone else too. Any suggestions would be appreciated.

I have a worked big blade from laprop with more pitch, tad more cup, and he played with the rake some to drop the bow (my boat needed that). On a stage 3 with a 48T lower gear on a gtr. It runs very well. Jumps out of the hole, carry 5 without issue around 24 now (it's worn some). I could probably get more speed and lose some of the load carrying, but top speed isn't a concern.

#CFFITR
#TheGhostBoat
#whoneedsphysicsihaveamudmotor

Get baggy to true up the hammer, got one from prodigy. Just him trueing it was worth it, I prefer hammer because it just lasts longer ion sand or clay

Sent from my SM-N950U using Tapatalk

Thanks for the replies. I called Delta to order a prop and they really suggested Gator Tails new 2 blade. From what I understand its a Power Tech. Jamie at Delta said they had good reviews. I just ran it this morning and the difference in holeshot and reverse is awesome. I only lost 1 mph top end. Still runs 33-34 and gets to the rev limiter a lot easier. I had a relatively light load today. I am looking forward to running it with 4 people in it and seeing what it will do.

Anyone run the new GT prop with heavy loads yet?

Doing delta level 3 on my XD uncle J 1854 to help push my hunt loads and Jamie recommended the same prop to me too

Running the new GT prop on my big block 25 seen maybe 1 to 2 mph increase, seen some difference in reverse and improvement in load carrying, worth the buy just my .02 cents.


Sent from my iPhone using Tapatalk

Baggy in Houma does the best prop work I've ever found. My buddy got him to work the GTR 37 XD 3 blade that came with his motor. He went from 28mph in an 18x60 to 32 after baggy worked it. Only mods he had was a voodoo. Baggy is super nice too and is able to answer any questions you may have. Getting him to work my merc 3 blade and my stock 3 black from gatortail next month. I asked him about 2 blades the last time I went there and he said the GTR 2 blade was excellent and said the hammer was excellent as well. The hammer he showed me looks like a prop off of a small battleship, so I'm sure it will last long. The GTR prop looks well made too, just not as robust as the hammer.

You can get them on prodigys website I believe bro. Also, looking into the gatortail XD fatblade. I have one and I love it. I'm getting it worked soon. Unworked it runs 30 at 4500 with a load. It's a massive prop like the hammer and according to baggy, after some work, it performs like a big blade or hammer.