Author |
Message |
Talkinfowl17
MMT Member
Joined: Sat Jan 20, 2018 1:01 am Posts: 35 Location: Houston, TX
|
Dropped my boat off
Just dropped my boat off to MaXXis85 for a full 35hp motor performance build. Excited to get it back already!
|
Sat Jul 21, 2018 11:41 pm |
|
|
brycecheramie
MMT 1000 Club
Joined: Thu Nov 04, 2010 7:38 am Posts: 4323 Location: Cut Off, La.
|
Re: Dropped my boat off
_________________ Refurbishing a Prodrive
|
Sun Jul 22, 2018 5:53 am |
|
|
Talkinfowl17
MMT Member
Joined: Sat Jan 20, 2018 1:01 am Posts: 35 Location: Houston, TX
|
Re: Dropped my boat off
He gave me a handshake and a garuntee that even Ricky Bobby himself would be proud to own that boat when he is done
|
Sun Jul 22, 2018 3:37 pm |
|
|
bluesky2012
MMT F.E.
Joined: Mon Jul 14, 2014 8:19 am Posts: 981
|
Re: Dropped my boat off
I’m sure it’ll turn out well. He did the heads on mine a few weeks ago. Had roughly a 2 week turnaround which you probably won’t take much more than. Post up the difference.
Sent from my iPhone using Tapatalk Pro
|
Sun Jul 22, 2018 7:28 pm |
|
|
Talkinfowl17
MMT Member
Joined: Sat Jan 20, 2018 1:01 am Posts: 35 Location: Houston, TX
|
Re: Dropped my boat off
Will do I'm running an edge 550 standard series and had a gatortail 23hp on it going with a 35 powered with a full build
|
Sun Jul 22, 2018 8:06 pm |
|
|
MaXXis85
MMT Elite Member
Joined: Wed Jan 14, 2009 7:23 am Posts: 6233 Location: Tarkington, TX
|
Re: Dropped my boat off
We are doing a Brand new 35 HP engine, with a full build for Jesse.
.120" longer Billet Aluminum Connecting rods Flat Top Forged JE pistons Cylinder heads with some Great ports and a BADASS Valve job. Welded Rocker Boss' Voodoo Performance Exhaust Tool Steel Billet Camshadt HSR 42 Mikuni Carburetor Port matched intake Ported Black Death adapter 1.6:1 Ratio Roller Rockers (shaft aligned and shared between intake and exhaust), HD Pushrods Mercury 3 blade propeller
This will be a big upgrade from a BONE STOCK 23 HP GTR
_________________ Bayou Surface Drive 337-351-0362 Tarkington, TX 77327
|
Mon Jul 23, 2018 5:31 am |
|
|
Wchauvin
MMT 1000 Club
Joined: Sat Sep 30, 2017 7:10 pm Posts: 1872
|
Re: Dropped my boat off
Can't wait to hear what this monster runs
|
Mon Jul 23, 2018 7:33 am |
|
|
Talkinfowl17
MMT Member
Joined: Sat Jan 20, 2018 1:01 am Posts: 35 Location: Houston, TX
|
Re: Dropped my boat off
You and me both
|
Mon Jul 23, 2018 11:40 am |
|
|
MaXXis85
MMT Elite Member
Joined: Wed Jan 14, 2009 7:23 am Posts: 6233 Location: Tarkington, TX
|
Re: Dropped my boat off
Update. Engine is here, Parts have poured in, I've taken all the new stock parts to NOT be used off. Will be pulling heads to work next week, Rods, pistons, and camshaft should arrive next week aswell. Once this motor is assembled I will swap onto Jesse's frame for a whole new attitude.
This engine will be a stout one that's for sure!
_________________ Bayou Surface Drive 337-351-0362 Tarkington, TX 77327
|
Fri Aug 03, 2018 6:21 am |
|
|
kirk
MMT F.E.
Joined: Thu Apr 18, 2013 5:52 pm Posts: 870 Location: SW LA
|
Re: Dropped my boat off
|
Sat Aug 04, 2018 3:23 pm |
|
|
Talkinfowl17
MMT Member
Joined: Sat Jan 20, 2018 1:01 am Posts: 35 Location: Houston, TX
|
Re: Dropped my boat off
YESSS
You do not have the required permissions to view the files attached to this post.
|
Tue Aug 07, 2018 12:50 am |
|
|
MaXXis85
MMT Elite Member
Joined: Wed Jan 14, 2009 7:23 am Posts: 6233 Location: Tarkington, TX
|
Re: Dropped my boat off
Motor Is apart and ready for the new rotating assembly and camshaft. I DE shrouded the Combustion chambers on the cylinder heads last night. As soon as my rods, pistons, and camshaft arrive I will build the short block then get back on the heads.
_________________ Bayou Surface Drive 337-351-0362 Tarkington, TX 77327
|
Tue Aug 07, 2018 6:47 am |
|
|
Talkinfowl17
MMT Member
Joined: Sat Jan 20, 2018 1:01 am Posts: 35 Location: Houston, TX
|
Re: Dropped my boat off
Marcus has been keeping me up to date with every detail. He found my lower unit bearings were going out and need to be replaced! That's customer service!
|
Wed Aug 15, 2018 3:43 pm |
|
|
MaXXis85
MMT Elite Member
Joined: Wed Jan 14, 2009 7:23 am Posts: 6233 Location: Tarkington, TX
|
Re: Dropped my boat off
Progress on Jesse's engine. The short block is complete after waiting for the custom pistons and Rods came in. Rings are file fit to the bore. Camshaft is timed for this application. Cylinder head porting along with the intake and Black Death adapter to start tomorrow.
Sent from my iPhone using Tapatalk
_________________ Bayou Surface Drive 337-351-0362 Tarkington, TX 77327
|
Wed Aug 22, 2018 6:15 pm |
|
|
TPerkins
MMT 1000 Club
Joined: Wed Jan 02, 2013 12:59 pm Posts: 1793 Location: Clear Lake, Tx
|
Re: Dropped my boat off
OP ain't gonna know what to do with all that extra ponies!
Sent from my SM-G955U using Tapatalk
|
Wed Aug 22, 2018 9:37 pm |
|
|
Will C
MMT Sponsor
Joined: Fri Jan 10, 2014 1:16 pm Posts: 2107 Location: Gladewater TX
|
Re: Dropped my boat off
Purdy
|
Thu Aug 23, 2018 7:40 am |
|
|
MaXXis85
MMT Elite Member
Joined: Wed Jan 14, 2009 7:23 am Posts: 6233 Location: Tarkington, TX
|
Re: Dropped my boat off
Its gonna Brap, Pretty good!
_________________ Bayou Surface Drive 337-351-0362 Tarkington, TX 77327
|
Thu Aug 23, 2018 10:02 am |
|
|
huck Finn
MMT 1000 Club
Joined: Thu Jan 31, 2013 5:42 pm Posts: 1913 Location: Conroe tx
|
Re: Dropped my boat off
I’m also interested in the final results . Have a similar build going on currently.
H finn
_________________ Ole black water keep on rolling
18x54 Uncle J -GTR - with the koolaid Back H2o SWOMP 23 SS stage 2 15x36 GD Duck Skiff GATOR GATOR GLIDE PROSTAFF BACKWATER PROSTAFF http://www.gatorglide.com
Coupe rest in peace brother
|
Thu Aug 23, 2018 6:57 pm |
|
|
MaXXis85
MMT Elite Member
Joined: Wed Jan 14, 2009 7:23 am Posts: 6233 Location: Tarkington, TX
|
Re: Dropped my boat off
Updates on jesses engine. Cylinder heads are done. I didn't take pics after the valve job. These heads came out really nice.
Sent from my iPhone using Tapatalk
_________________ Bayou Surface Drive 337-351-0362 Tarkington, TX 77327
|
Fri Aug 31, 2018 7:26 pm |
|
|
Will C
MMT Sponsor
Joined: Fri Jan 10, 2014 1:16 pm Posts: 2107 Location: Gladewater TX
|
Re: Dropped my boat off
Looking good!
|
Fri Aug 31, 2018 9:19 pm |
|
|
MaXXis85
MMT Elite Member
Joined: Wed Jan 14, 2009 7:23 am Posts: 6233 Location: Tarkington, TX
|
Re: Dropped my boat off
The engine will get fully assembled today. Tomorrow I will swap the 35 on the frame in preparation for tuning it. I rebuilt Jesse's lower as the bearing were really bad off.
_________________ Bayou Surface Drive 337-351-0362 Tarkington, TX 77327
|
Tue Sep 04, 2018 6:26 am |
|
|
cb5331
MMT Super Elite Member
Joined: Fri Dec 18, 2009 8:10 pm Posts: 16915 Location: Rowlett, TX
|
Re: Dropped my boat off
Taking long enough, sheesh.
Lol
|
Tue Sep 04, 2018 8:23 am |
|
|
Ducaholic
MMT 1000 Club
Joined: Wed Feb 10, 2010 3:28 pm Posts: 1014 Location: Avoyelles Parish
|
Re: Dropped my boat off
_________________ 18X44 Geaux Custon Powered By MB 4500 BD
|
Tue Sep 04, 2018 9:44 am |
|
|
cb5331
MMT Super Elite Member
Joined: Fri Dec 18, 2009 8:10 pm Posts: 16915 Location: Rowlett, TX
|
Re: Dropped my boat off
|
Tue Sep 04, 2018 2:31 pm |
|
|
bluesky2012
MMT F.E.
Joined: Mon Jul 14, 2014 8:19 am Posts: 981
|
Re: Dropped my boat off
|
Tue Sep 04, 2018 2:57 pm |
|
|
MaXXis85
MMT Elite Member
Joined: Wed Jan 14, 2009 7:23 am Posts: 6233 Location: Tarkington, TX
|
Re: Dropped my boat off
Sent from my iPhone using Tapatalk
_________________ Bayou Surface Drive 337-351-0362 Tarkington, TX 77327
|
Wed Sep 05, 2018 5:15 am |
|
|
MaXXis85
MMT Elite Member
Joined: Wed Jan 14, 2009 7:23 am Posts: 6233 Location: Tarkington, TX
|
Re: Dropped my boat off
_________________ Bayou Surface Drive 337-351-0362 Tarkington, TX 77327
|
Wed Sep 05, 2018 5:19 am |
|
|
Talkinfowl17
MMT Member
Joined: Sat Jan 20, 2018 1:01 am Posts: 35 Location: Houston, TX
|
Re: Dropped my boat off
|
Wed Sep 05, 2018 2:34 pm |
|
|
Talkinfowl17
MMT Member
Joined: Sat Jan 20, 2018 1:01 am Posts: 35 Location: Houston, TX
|
Re: Dropped my boat off
|
Fri Sep 07, 2018 3:00 pm |
|
|
OwenDickeson
MMT Elite Member
Joined: Wed Mar 11, 2009 12:45 pm Posts: 9869
|
Re: Dropped my boat off
Looks like it's running good.
|
Fri Sep 07, 2018 5:35 pm |
|
|
Wchauvin
MMT 1000 Club
Joined: Sat Sep 30, 2017 7:10 pm Posts: 1872
|
Re: Dropped my boat off
Can't wait to hear what you are running with it bro
|
Fri Sep 07, 2018 6:53 pm |
|
|
Talkinfowl17
MMT Member
Joined: Sat Jan 20, 2018 1:01 am Posts: 35 Location: Houston, TX
|
Re: Dropped my boat off
Takin it out Monday. Have to say I am beyond satisfied with the whole experience from figuring out what build I want. Having it built by reputable mechanic. As well as the customer service that came with it. Thanks Marcus
|
Fri Sep 07, 2018 8:35 pm |
|
|
Wchauvin
MMT 1000 Club
Joined: Sat Sep 30, 2017 7:10 pm Posts: 1872
|
Re: Dropped my boat off
Exactly why I'm sending Marcus my motor after duck season. Very good customer service, very knowledgeable, and gives you his word on his product. Can't wait to have him stage up my 40
|
Sat Sep 08, 2018 4:57 am |
|
|
bluesky2012
MMT F.E.
Joined: Mon Jul 14, 2014 8:19 am Posts: 981
|
Re: Dropped my boat off
Just wait dude. With Marcus’ head recipe alone I was able to plane 4 big dudes, dog and gear today. Prior to that a 2 man hunt load was all I got. His work is solid.
Sent from my iPhone using Tapatalk Pro
|
Sat Sep 08, 2018 9:35 am |
|
|
Wchauvin
MMT 1000 Club
Joined: Sat Sep 30, 2017 7:10 pm Posts: 1872
|
Re: Dropped my boat off
That's awesome bro, I can't wait man, I'm super excited to get my 40 worked on by him
|
Sat Sep 08, 2018 12:00 pm |
|
|
DmaxHunter
MMT 1000 Club
Joined: Wed Jan 18, 2012 7:21 pm Posts: 2207 Location: North Alabama
|
Re: Dropped my boat off
_________________ 2014 PRODIGY 1754 (#19) 2014 5500 BAMF HDR RETRO SOLD
2010 Gator Tail Gator Series 18x54 pushed by a 2020 40GTRXD
|
Sat Sep 08, 2018 2:14 pm |
|
|
Talkinfowl17
MMT Member
Joined: Sat Jan 20, 2018 1:01 am Posts: 35 Location: Houston, TX
|
Re: Dropped my boat off
|
Sat Sep 08, 2018 8:00 pm |
|
|
bluesky2012
MMT F.E.
Joined: Mon Jul 14, 2014 8:19 am Posts: 981
|
Re: Dropped my boat off
|
Sun Sep 09, 2018 11:46 am |
|
|
MaXXis85
MMT Elite Member
Joined: Wed Jan 14, 2009 7:23 am Posts: 6233 Location: Tarkington, TX
|
Re: Dropped my boat off
Thanks fellas. Like I told Jesse, His hull will now be the limiting factor. The engine is a workhorse even at a 4750 RPM limit.
_________________ Bayou Surface Drive 337-351-0362 Tarkington, TX 77327
|
Mon Sep 10, 2018 5:15 am |
|
|
Talkinfowl17
MMT Member
Joined: Sat Jan 20, 2018 1:01 am Posts: 35 Location: Houston, TX
|
Re: Dropped my boat off
https://vimeo.com/user69648132/review/2 ... b544a0c636Well took the boat out! Its an edge 1550 standard series not a mud hull. Me and Marcus agreed my hull is the limiting factor with it being a smaller Hull and not a mud hull. I got 35 with me and my dog. I got 29 with me and 2 other guys with a dog. For what I am using it for which is tight timber and marsh here and there these speeds and the power it has to haul I am 100000000% satisfied and could not be happier. This boat still has plenty of power to haul more guys and I am excited to see how well it performs with my duck load! Thanks again Marcus if anyone wants a performance motor built you seriously need to consider Marcus at Bayou Surface Drive!
|
Mon Sep 10, 2018 7:24 pm |
|
|
|