| It is currently Mon Jul 28, 2025 9:49 pm |
|
Page 1 of 1 |
[ 14 posts ] |
| Print view | Previous topic | Next topic |
Tiny Tach
| Author | Message |
|---|---|
|
MMT 1000 Club  Joined: Tue Jan 12, 2010 12:42 pm Posts: 2161 Location: Houma,LA 
|
 Tiny TachI did a search but there is nothing specific about what I am trying to find out.
So I bought one today. The "Gas" Version.  Well, I installed it according to the directions, cranked the motor up, hit the throttle and had a Max RPM of 5000.  This little motor is supposed to have max RPM of 3600. It also says it's idle is 2300. These numbers sound high. Don't they?The model I have is the one where you change the settings for spark. Could this be set wrong? Doesn't a gas engine have a spark every other rev? 1 for combustion 1 for ingnition. That means it would be set on 720 not 360 right? I'm stumped. _________________ Copperhead 12Hp SD on 1442 Alweld |
| Fri Aug 20, 2010 4:24 pm |
 
|
|
|
|
MMT 1000 Club  Joined: Wed Jan 14, 2009 8:58 pm Posts: 2731 Location: Lafayette, LA
|
Re: Tiny Tach Intake, compression, combustion (power), exhaust. Single cylinder fires every other revolution. V-twin fires every revolution opposite cylinder each time. As for the setting, I'm not sure.
_________________ 1644 WeldCraft / 27 GDLT Ranger R71 / 125 Merc |
| Fri Aug 20, 2010 5:52 pm |
|
|
|
|
MMT 1000 Club Joined: Tue Jan 12, 2010 12:42 pm Posts: 2161 Location: Houma,LA
|
Re: Tiny Tach Woops said the wrong thing. Should it be set at 180 instead of 360?
Maybe it's right, but 5k rpms sounds a bit high. Thanks for the help Kibb _________________ Copperhead 12Hp SD on 1442 Alweld |
| Fri Aug 20, 2010 6:08 pm |
|
|
|
|
MMT F.E.  Joined: Mon Feb 01, 2010 11:01 am Posts: 881
|
Re: Tiny Tach doubt if that is right. think there is a setting for number of cylinders and you probably need to adjust that...
|
| Fri Aug 20, 2010 6:45 pm |
|
|
|
|
MMT 1000 Club Joined: Tue Jan 12, 2010 12:42 pm Posts: 2161 Location: Houma,LA
|
Re: Tiny Tach Still having issues with this tiny tach. If I set it up to read the idle RPMs right, which are 1000-1100 RPM, at WoT out of the water, I only get 2300-2400 RPMs. MAx for this 6.5 is 3850+/-150 RPM.
According to this page, it is to be set at 720, but then the RPM at idle is 2400ish. Right now I have is set at 180 and the idle speed is right, but this setup is for 2 sparks per revolution. Doesn't make any sense. http://www.tinytach.com/tinytach/pdf/TT ... ctions.pdf _________________ Copperhead 12Hp SD on 1442 Alweld |
| Mon Sep 13, 2010 8:55 am |
|
|
|
|
MMT 1000 Club Joined: Tue Jan 12, 2010 12:42 pm Posts: 2161 Location: Houma,LA
|
Re: Tiny Tach OK, talked with the Tiny Tach tech and he said add more wraps and I did. Here is what I have. What do I have wrong?
You do not have the required permissions to view the files attached to this post. _________________ Copperhead 12Hp SD on 1442 Alweld |
| Fri Sep 17, 2010 5:16 pm |
|
|
|
|
MMT Pro Member  Joined: Fri Aug 13, 2010 9:36 pm Posts: 152 Location: Blountstown, FL
|
Re: Tiny Tach wrap it around the ceramic part on the spark plug...
 _________________ "A duck for a fuc* a fuc* for a duck and 25 bucks for a fuc*ed up duck" |
| Sat Sep 18, 2010 10:33 am |
|
|
|
|
MMT 1000 Club Joined: Tue Jan 12, 2010 12:42 pm Posts: 2161 Location: Houma,LA
|
Re: Tiny Tach _________________ Copperhead 12Hp SD on 1442 Alweld |
| Sat Sep 18, 2010 1:59 pm |
|
|
|
|
MMT Pro Member Joined: Fri Aug 13, 2010 9:36 pm Posts: 152 Location: Blountstown, FL
|
Re: Tiny Tach _________________ "A duck for a fuc* a fuc* for a duck and 25 bucks for a fuc*ed up duck" |
| Sat Sep 18, 2010 2:11 pm |
|
|
|
|
MMT 1000 Club Joined: Tue Jan 12, 2010 12:42 pm Posts: 2161 Location: Houma,LA
|
Re: Tiny Tach _________________ Copperhead 12Hp SD on 1442 Alweld |
| Sun Sep 19, 2010 8:36 am |
|
|
|
|
MMT 1000 Club Joined: Wed Jan 14, 2009 8:58 pm Posts: 2731 Location: Lafayette, LA
|
Re: Tiny Tach Its in the correct place.
_________________ 1644 WeldCraft / 27 GDLT Ranger R71 / 125 Merc |
| Sun Sep 19, 2010 4:41 pm |
|
|
|
|
MMT Pro Member Joined: Fri Aug 13, 2010 9:36 pm Posts: 152 Location: Blountstown, FL
|
Re: Tiny Tach cMiller73, when i bought the MM it was wraped around the ceramic part of the SP. I asked my buddy who works at a mower shop and he said its fine where its at... idk it might be in the worng place. ima call setx tmro and see what they have to say.
_________________ "A duck for a fuc* a fuc* for a duck and 25 bucks for a fuc*ed up duck" |
| Sun Sep 19, 2010 7:48 pm |
|
|
|
|
MMT Pro Member  Joined: Thu Jan 15, 2009 1:24 am Posts: 455
|
Re: Tiny Tach I just wrapped mine around one of my plug wires like you have done and it works great.
|
| Tue Sep 21, 2010 1:16 am |
|
|
|
|
MMT 1000 Club Joined: Tue Jan 12, 2010 12:42 pm Posts: 2161 Location: Houma,LA
|
Re: Tiny Tach _________________ Copperhead 12Hp SD on 1442 Alweld |
| Tue Sep 21, 2010 7:35 am |
|
|
|
|
|
Page 1 of 1 |
[ 14 posts ] |
|
All times are UTC - 6 hours |
Who is online |
Users browsing this forum: Google [Bot] and 124 guests |
| You cannot post new topics in this forum You cannot reply to topics in this forum You cannot edit your posts in this forum You cannot delete your posts in this forum You cannot post attachments in this forum |