It is currently Tue Sep 09, 2025 4:00 am




Reply to topic  [ 16 posts ] 
 brother breaux outboard build 
Author Message
MMT Pro Member

Joined: Mon May 07, 2012 7:21 am
Posts: 112
Post brother breaux outboard build
finally got her rigged with 90 hp yamaha.
b&b 19ft x 60 with v bow
23 in. sides with 6in catwalks
center console

she ran like a scalded dog at 38 knots with 20 gallons fuel. super stable and very happy with handling perforormance.

need some advice though. she was built with mud boat style trim tabs on each transom corner. the more i try to trim her up while underway the more bow is shoved downward. its almost like an opposite effect. any corrective thoughts on this would be appreciated. would cutting tabs off be my cure?
having trouble with pic post but can send pic to someone on here via i phone if they will post it.

swampfox


Wed May 08, 2013 7:52 am
Profile
MMT Pro Member

Joined: Mon May 07, 2012 7:21 am
Posts: 112
Post Re: brother breaux outboard build
well, any any thoughts on trim ?


Wed May 08, 2013 7:59 am
Profile
MMT 1000 Club
User avatar

Joined: Fri Oct 29, 2010 8:24 am
Posts: 1958
Location: Bristol, FL
Post Re: brother breaux outboard build
ImageUploadedByTapatalk1368022062.470066.jpg


You do not have the required permissions to view the files attached to this post.

_________________
1754 GTB / 35 GTR


Wed May 08, 2013 8:08 am
Profile
MMT Pro Member

Joined: Thu Feb 14, 2013 7:28 am
Posts: 179
Location: Central FL
Post Re: brother breaux outboard build
are you talking about trimming the motor up or the tabs?

_________________
16/42 crawfish skiff - 31GDLT


Wed May 08, 2013 8:11 am
Profile
MMT 1000 Club
User avatar

Joined: Fri Oct 29, 2010 8:24 am
Posts: 1958
Location: Bristol, FL
Post Re: brother breaux outboard build
That dude builds a fine boat, sonbitch.

not sure how to help with the trim. heres a pic of the rear of my river boat. flat bottom small tabs in back, but i do not have the problem with the boat diving when i trim up


You do not have the required permissions to view the files attached to this post.

_________________
1754 GTB / 35 GTR


Wed May 08, 2013 8:11 am
Profile
MMT 1000 Club
User avatar

Joined: Sat Jun 25, 2011 8:33 am
Posts: 1352
Location: Genoa AR
Post Re: brother breaux outboard build
Try bending the tabs up.


Wed May 08, 2013 8:16 am
Profile
MMT 1000 Club
User avatar

Joined: Sun Feb 03, 2013 1:26 pm
Posts: 3084
Location: Down South
Post Re: brother breaux outboard build
Boat looks good! X2 on trim tabs

_________________
1852 Dfou custom 35gtr


Wed May 08, 2013 9:37 am
Profile
MMT Pro Member

Joined: Mon May 07, 2012 7:21 am
Posts: 112
Post Re: brother breaux outboard build
i think i figured it out . had motor hung too low and cavitation plate was below bottom of transom. unbolted and raised motor to 3rd bolt hole and gonna try out today. anyone ever dealt with this on outboard?
swamp....


Thu May 09, 2013 6:30 am
Profile
MMT Pro Member

Joined: Mon May 07, 2012 7:21 am
Posts: 112
Post Re: brother breaux outboard build
i think i figured it out . had motor hung too low and cavitation plate was below bottom of transom. unbolted and raised motor to 3rd bolt hole and gonna try out today. anyone ever dealt with this on outboard?
swamp....


Thu May 09, 2013 6:31 am
Profile
MMT 1000 Club
User avatar

Joined: Fri Oct 29, 2010 8:24 am
Posts: 1958
Location: Bristol, FL
Post Re: brother breaux outboard build
def dont want the cav plate below the bottom of the boat, if anything hang an inch or two above. should be aite. send me a couple pics to post.

_________________
1754 GTB / 35 GTR


Thu May 09, 2013 10:53 am
Profile
MMT Pro Member

Joined: Mon May 07, 2012 7:21 am
Posts: 112
Post Re: brother breaux outboard build
10-4


Thu May 09, 2013 10:58 am
Profile
MMT F.E.
User avatar

Joined: Wed Jan 14, 2009 10:44 pm
Posts: 828
Location: North Texas
Post Re: brother breaux outboard build
Hey Swampfox, please post a few more pics of your boat, especially the front end, is that a mod v into a flat?,looks good

_________________
Crisis defines character


Fri May 10, 2013 5:21 am
Profile
MMT Pro Member
User avatar

Joined: Mon Feb 02, 2009 9:59 am
Posts: 160
Location: Marshville, Texas
Post Re: brother breaux outboard build
Jackplate. It gives you setback and rise.

Sent from my C771 using Tapatalk 2

_________________
From the front line to a huntin blind...
Banded Brigade Outdoors
www.bandedbrigadeoutdoors.org


Fri May 10, 2013 6:36 am
Profile WWW
MMT Pro Member

Joined: Mon May 07, 2012 7:21 am
Posts: 112
Post Re: brother breaux outboard build
boat is at crab dock and will be there this afternoon to take some more pics.
yes it is modv into flat. have contemplated jack plate but am broke after hydro-steering and motor purchase last week. gonna try out adjusted cav-plate today. krogers, i am gonna send u some pics via phone.


swamp......


Fri May 10, 2013 8:46 am
Profile
MMT 1000 Club
User avatar

Joined: Fri Oct 29, 2010 8:24 am
Posts: 1958
Location: Bristol, FL
Post Re: brother breaux outboard build
ImageUploadedByTapatalk1368199983.636597.jpg

ImageUploadedByTapatalk1368200000.044612.jpg

ImageUploadedByTapatalk1368200010.787130.jpg


You do not have the required permissions to view the files attached to this post.

_________________
1754 GTB / 35 GTR


Fri May 10, 2013 9:34 am
Profile
MMT 1000 Club
User avatar

Joined: Fri Oct 29, 2010 8:24 am
Posts: 1958
Location: Bristol, FL
Post Re: brother breaux outboard build
ImageUploadedByTapatalk1368200058.461362.jpg

ImageUploadedByTapatalk1368200068.615123.jpg

Good talkin with you, swampfox. Badass boat too.


You do not have the required permissions to view the files attached to this post.

_________________
1754 GTB / 35 GTR


Fri May 10, 2013 9:35 am
Profile
Display posts from previous:  Sort by  
Reply to topic   [ 16 posts ] 

Who is online

Users browsing this forum: No registered users and 1 guest


You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

Jump to: