It is currently Wed Dec 24, 2025 3:53 am




Reply to topic  [ 7 posts ] 
 performance of 30hp long tail on a prodrive boat 
Author Message
MMT Pro Member

Joined: Tue Nov 23, 2010 6:19 pm
Posts: 54
Post performance of 30hp long tail on a prodrive boat
I have a 1756 prodrive boat with currently a prodrive motor. I'm there are times that a long tail would be a better application. How would a long tail push that boat. I carry a 70 pound duck skiff and decoys. I'm curious on the experts thoughts.


Mon Oct 27, 2014 1:47 pm
Profile
MMT Pro Member

Joined: Tue Nov 23, 2010 6:19 pm
Posts: 54
Post Re: performance of 30hp long tail on a prodrive boat
I see know one wants to bit on this so how about this. what is the ideal boat fora 35hp longtail mudmotor? flat & wide, flat & narrow? or a mod-V front? what works well with that type of motor.

Thanks,


Thu Oct 30, 2014 8:32 am
Profile
MMT 1000 Club

Joined: Mon Sep 19, 2011 6:32 pm
Posts: 1490
Location: south Florida
Post Re: performance of 30hp long tail on a prodrive boat
Sorry, I just saw this. A 35 LT will move that heavy prodrive hull and all that gear, but it will be slow. If it is a tall transom (20-21") it will be even more difficult to plane; BackH2o's 35 LS may be the best fit in that case...I am sure you would not want to cut down the transom. A narrower bottom (38-48") would be more desirable. Flat bottom and "narrow" hull is best, a mod-v front is fine as is a square front; I would opt for the semi-v front just to make passage through tall grass a bit easier. I have always had an LT because that is what works for me...if the prodrive hull is a short transom, then the BackH2o 35 SS would probably be the best; again, it would be slow with a full hunting load, but still get you there and back. I believe a couple of waterfowlers here have or still are using a similar configuration hull with a 35 LT, and they can best tell you their GPS speeds with load.

_________________
Sailing in the sawgrass /1648 grizzly and Swomp 26.5 EFI


Thu Oct 30, 2014 9:32 am
Profile
MMT Member

Joined: Wed Dec 05, 2012 7:24 am
Posts: 35
Post Re: performance of 30hp long tail on a prodrive boat
Sorry forgot to give speeds 24 empty 22 loaded to hunt {1 guy} And my 2cents on the motor choice go with the 35cdi SLT you get gear reduction, neutral. The gear reduction makes a big difference on a large boat


Thu Oct 30, 2014 9:41 am
Profile
MMT Member

Joined: Wed Dec 05, 2012 7:24 am
Posts: 35
Post Re: performance of 30hp long tail on a prodrive boat
Sorry my first reply did not post I run a 17x54 gator trax and have a 9ft four rivers in the boat most trips I have a mb 35cdi SLT in my opinion best LT for a big heavy boat


Thu Oct 30, 2014 12:39 pm
Profile
MMT Pro Member

Joined: Thu Feb 16, 2012 4:02 pm
Posts: 202
Post Re: performance of 30hp long tail on a prodrive boat
Muddyriver, my friend hunts out of a 1648 riveted boat and a 31 godevil, he runs low twenties heavily loaded. The boat only weighs about 270lbs. Your prodrive boat probably weighs around 600 and is a modified v correct? IF so I think that boat motor combo would be a pig, I wouldn't do it. If you need a longtail I would buy a longtail boat. Good luck and keep us posted.


Thu Oct 30, 2014 2:24 pm
Profile
New Member

Joined: Sun Oct 05, 2014 8:20 am
Posts: 1
Post Re: performance of 30hp long tail on a prodrive boat
Just so you have some close numbers i just put a new 35 mudbuddy lt on my 18 foot big john. 3 men, around 80 big plasti duk decoys im making roughly 17-18 kts. its not lighting the world on fire but its best for my application. if i want to go fast i have a 25 privateer with an outboard with a real scisoor rig lol


Sun Nov 02, 2014 12:11 pm
Profile
Display posts from previous:  Sort by  
Reply to topic   [ 7 posts ] 

Who is online

Users browsing this forum: No registered users and 1 guest


You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

Jump to: